- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you stop by an Autozone, or similar big parts retailer, they will scan for codes free. Get it scanned and go from there, don't play the guessing game and end up replacing parts that aren't defective. Just because a friend of a friend had same problem and this is what they did, and it worked, doesn't mean you have the same problem. Many sensors etc, can sometimes cause similar symptoms.
code po700 is to tell the ecm and you there is a trans.problem and dtc set in trans.module. po755 is a trans. shift solenoid problem. check trans.fluid level when hot and color of fluid ,dark is not good,burnt smell not good .chrysler has a large trans.problem need to visit a trans. shop for repairs.hope this helps.
Take the van to an autoparts store and have them scan the computer for any fault codes it has stored. Most parts store will do the scan for free. The check engine light means that the computer has noted a fault in one of the van's systems. Getting the codes will help identify the problem. Hope this helped and best wishes.
Bring it to a parts store, most will scan for engine trouble codes for free. They will plug a hand held scan tool into the vans diagnostic port (under the dash) and 'read' codes stored in the van's computer. They can tell you what the codes mean, and suggest how to fix it. If you have any further questions at that time, post them here with the code #'s. Good luck. Curt
Well barwest , you should always have code 12 ,,, 1 blink then 2 blinks , this is not a prob it is a code to tell you that the onboard dyignostics is working. now for the code 55 this means that the code read is done . so the numbers in the middle is really your prob but you are missing a number with the 3 , do the key again and let me know remember your code is after the 1 blink and 2 blinks ,try that ,there is a number missing ok , joe