Question about 1995 Isuzu Pickup

2 Answers

96 bighorn. how to reset timing belt indicator light?

Posted by on

  • jason May 11, 2010

    have you unhooked the battery for a few? have you replace the timming sensor?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Hi

The disconnect battery thing dont work but this solution is from another forum.

To cancel lamp remove instrument pod on the rear there are 3 holes in a
line
vertical 1 will house a screw the opposite will be taped over maybe !!!
remove screw & relocate in vacant hole ignoring the centre hole this
simply
operates a changeover cam allowing the mileometer to start counting again
any probs let me know

Posted on Jan 11, 2009

  • oeinnz Jan 11, 2009

    Swap the screw in the bottom KSW hole to the other KSW hole.The light will now come on at the next 100k or leave the screw out if you dont want the timing light to come on ever again.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 314 Answers

Remove the battery cable for a minute. That should reset the pc! Frankster016

Posted on Oct 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing belt change on 92 bighorn 4jg2.bolts into both cogs, tdc etc.now it runs rough and heaps of smoke, checked timing belt 2x rotations back to tdc and bolts lined up Possibly pump timing?


fuel pumps ( diesel pumps) that are belt driven are spring loaded for the timing
you cannot remove and replace the belt as the pulley will move 1 tooth put of time
check where the timing mark on the pump pulley is when the crank and camshaft marks are on the spot and readjust to the mark where it should be

Jul 29, 2015 | Cars & Trucks

2 Answers

Isuzu bighorn transmission light keeps blinking


When this light blinks it indicates a problem exists with the electronically controlled transmission, have it scanned for the fault code that is store in the control module.

Feb 20, 2012 | Isuzu Ascender Cars & Trucks

1 Answer

Does the timing need reset after the belt removal


As long as marks were lined up, no.
Timing adjustment was meant to compensate for chain wear or stretch.
With a 96 OBD II, if no service engine light comes up with a code you should be fine.

Oct 14, 2011 | 1996 Isuzu Rodeo

1 Answer

My 1997 Isuzu bighorn (trooper) appears to "miss"


When is the last time a tune up was performed on the vehicle? I would get some amsoil engine foam, and use it as described. Also get some fuel system cleaner and use that as well and go from there.
Thank you,
Lee

Nov 30, 2010 | 1994 Isuzu Trooper

1 Answer

How do i reset the oil light on my 95 fleetwood cad


1993 BROUGHAM & 1993-96 FLEETWOOD
Oil Life Indicator
1. Oil life indicator will display CHANGE OIL when oil change is needed, based upon engine oil temperatures and driving patterns. After changing oil, reset
oil life indicator.
2. To reset, turn ignition switch to ON position. Do not start engine. Fully press and release accelerator pedal 3 times within 5 seconds. If CHANGE OIL light
comes on and stays on for 5 seconds, it did not reset. Reset system again.

Jun 08, 2010 | 1995 Cadillac Fleetwood

2 Answers

How do i reset my timing beltwarning light after changing the belt on a 97 Isuzu Bighorn (Trooper) 3.1 torbo diesel


this is not right there should be a rubber grommet in cluster lens take out and press button with ignition on to reset light just like resetting trip meter

Oct 20, 2009 | 1994 Isuzu Trooper

2 Answers

Reset oil service light 318ti 96


You can also take a paper clip (can mess things up, but I use it) And have it touch the 7th & 19th pin inside the service port.

Jun 04, 2009 | 1996 BMW 318

1 Answer

96 Accord EX


Electrical short - probably

Mar 10, 2009 | 1986 Honda Accord

1 Answer

Don't know how to reset timing belt warning light after belt repl


You must remove the dash panel and you'll find a screw just behind the warning light. You have to swap the screw place...it's written at the back "timing belt reset".

Feb 08, 2009 | 1996 Toyota 4Runner

Not finding what you are looking for?
1995 Isuzu Pickup Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...