Question about 1993 Ford Taurus

1 Answer

Headlight assembly has a crack in it and the bulb blows out when it rains

There is a crack in the headlight assembly and when it ranis and i go through a puddle the bubl blow out. My problem is that i would like to know how to change the headlight assembly, I think that would be cheaper in the long run than buying bulbs everytime it rains. Can you help me by telling me how to remove the headlight assembly?
Thank you so much
Tami Allen

tami_allen@yahoo.com

Posted by on

  • Anonymous Feb 14, 2009

    Do you need a special tool to remove headlight?

  • sabprism May 11, 2010

    I have a new set of headlamp assembly's for a 92 taurus. It does not have the 4 screws that are mentioned. Rather it appears to have 3 sets of clips on each. So far I have managed to remove one whole and break one, the last one I can not get off (lowest one). Any sugestions on how a shade-tree/backyard mechanic can remove these? I do not have any special tools!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,043 Answers

4 screws. 2 above, 2 below.
It screws into a bracket assembly that does all of the adjustments, so you don't even need to realign.
I would suggest getting the replacement before starting.
Here's a link to an aftermarket replacement (cheaper then factory)
http://www.autopartswarehouse.com/featured/body_parts/1461452503.html

Remove the bulb, remove the screws, pull out the old assembly.
Put the new one in, plug in the bulb, you're ready to go.

Posted on Oct 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lights will not turn on


HEADLIGHTS NOT WORKING


It can be faulty headlight switch or issue with its wiring. Or its faulty head light fuse.


==========

To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of headlights not working:-----

Click the link below: -----


All headlights not working?

http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------

Working of Headlight switch?
------------
Both headlight bulbs blow together?

------------
Car headlight bulbs don't last long?

---------------

2007 Dodge Caliber: Low Beam Headlight Not working

http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html

----------

2003 Toyota Camry: Headlights Work Intermittently?

http://technoanswers.blogspot.in/2012/04/2003-toyota-camry-headlights-work.html

----------

Chevy Tahoe: Low Beam Lamps are not working?

http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html

----------

2001 Chevrolet Tahoe: Headlights not coming ON?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-headlights-not.html

--------

2004 Dodge Ram: High Beam Light is DIM?

http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html

----------

2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html

------------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

---------
How to Replace a Headlight

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------

Headlight Assembly Removal On Honda Accord

http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html

---------------

Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html

-----------

How to Replace a Headlight Door

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

----------

How to replace HID headlight bulbs for lexus 400h?

http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------------

These will help.

Thanks.

Nov 28, 2012 | 1986 GMC K1500

1 Answer

REPLACE HEADLIGHT 2008 SPRINTER


On some cases there are few hidden clips holding the assembly from under hood,that has to be released to remove headlight .

There are few troubleshooting help links showing how to replace car headlights,i suggest you to refer the links to solve these issue.

--------
Click the link below:------
How to Replace a Headlight http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------
Low beam headlights Modification? http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html --------------- Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html-----------
How to Replace a Headlight Door http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

---------
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------
How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------
Working of Headlight switch?
------------
Both headlight bulbs blow together?
------------
Car headlight bulbs don't last long?



----------------
These will help.
Thanks.

Nov 23, 2012 | 2010 Mercedes-Benz Sprinter

3 Answers

Replace headlight bulb


  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
  27. PLS VOTE ME
BMW e46 HID Headlight Replace
replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-0.jpg

replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 23, 2012 | 2000 GMC Denali

1 Answer

Whant to remove headlight renault trafic 56 reg as mine has cracked




  1. Open the hood.
  2. Remove the 10mm bolts.
  3. Now slide the headlight assembly forward.
  4. Remove the connector from the bulb.
  5. Now remove the headlight assembly completely and address the bulb


  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 09, 2011 | Cars & Trucks

1 Answer

There is water getting in my passanger side headlight and it keeps breaking the light bulb there are no cracks in the headlight


Check the gasket at the base of the bulb holder. If there are no cracks or holes then that is the only place water can enter the headlight assembly.

Dec 22, 2010 | 2005 Dodge Stratus

1 Answer

Dirt inside my headlight


  • Open the hood of your Honda Civic, and identify the headlight assembly that has the dirt inside of it. Depending on the year of your Civic and side of the headlight, you may need to move the power steering reservoir to gain access to the light assembly.
  • 2 Squeeze the clips on both sides of the headlight assembly to release the headlight connectors. Use your fingers to loosen the headlight, and pull the small plastic tab to loosen the rubber gasket from the frame.
  • 3 Unplug the wiring harness from the back of the bulb. Twist the bulb, to remove it from the headlamp assembly.
  • 4 Locate, and remove, the screws that hold the headlight casing in place. Once the screws have been removed, gently guide the headlight casing from the location.
  • 5 Inspect the assembly under a bright light, identifying any cracks that may be in the casing. If there is a crack, use a silicone sealant to seal the crack.
  • 6 Dry the assembly, using a towel and or hairdryer.
  • 7 Replace the assembly back into your Honda Civic, and secure it by replacing the screws you removed.
  • 8 Replace the rear gasket where the bulb is inserted with a new gasket. Insert the bulb, and twist it into place.
  • 9 Reattach the bulb wiring harness.
  • 10 Turn the lights on, and re-aim the light assembly. good job your done

  • Dec 18, 2010 | 2004 Honda Civic

    1 Answer

    How to install headlights on 2002 toyota camry


    I assume you mean just the bulbs:
    1. 1 Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off.
    2. 2 Open the hood using the primary and auxiliary hood release latches.
    3. 3 Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced.
    4. 4 Turn the headlight bulb socket counterclockwise to remove it from the assembly.
    5. 5 Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.
    6. 6 Attach the electrical connector to the new bulb and insert it into the headlight assembly. Twist it clockwise to secure its position.
    7. 7 Test the new headlight to make sure it works before closing the hood.
    Thank you,
    Lee

    Aug 25, 2010 | 2002 Toyota Camry

    2 Answers

    How do I replace the headlight bulb on a 2002 jetta?


    on the back of the headlight assembly, you will see a cover that is held down by two clamps. Flip the clamps to the side and remove the cover. Then you can disconnect the wiring from the bulb and then twist the retaining rain counter clockwise to remove the bulb

    Oct 02, 2009 | 2002 Volkswagen Jetta TDI

    2 Answers

    Headlight blows on a regular basis - once evrey 200 miles or so. Have tried using different supplier but makes no difference


    do you have dew or water settlement inside the headlight casing? SOunds like you my have a leaky assembly. if the assembly is not air tight it will cause the headlights to do this.

    Nov 26, 2008 | Mazda 323 Cars & Trucks

    1 Answer

    Headlight


    This is always caused by moisture getting into the headlight lens assembly, the surface of the bulb is about 500 degree's, if any moisture even a tiny bit gets on the bulb is cracks the glass and the filament burns out, the leak will be in the electro-static seal weld of the lens edge and is a common concern on all models of cars that use a plastic lens and separate bulb setup. Solution replace the headlight lens, they are cheap and can be bought from partstrain.com, about $60.00

    Nov 25, 2008 | 1999 Honda Accord

    Not finding what you are looking for?
    1993 Ford Taurus Logo

    240 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    60867 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Fordexpert

    Level 3 Expert

    5331 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...