Question about 2000 Audi TT

1 Answer

No fuel no power to fuelpump

Posted by on

  • Anonymous Mar 31, 2009

    audi tt what is the quickest way to the fuel pump

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 29 Answers

Check fuse #28 and fuel relay has been a problem spot with the TT. Relay should be located in the mini panel under the steering column, relay #167 or 409. Try to reseat the relay. Here is a link to a TT wire diagram.
http://mk1tt.montebellopark.com/pdf/2002MYStdEquipWiring.pdf

Next would be one of the 2 fuel pumps located under the back seat. There you will find the access covers to the sending units/fuel pumps.

Posted on Feb 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 f-250 had two spark plugs come out the eng i replaced them with helacoils no fuel so i changed the fuel pump still no fuel


Check your Inertia switch, should be located behind a kickpanel or behind glovebox. Vibrations could have triggered it. It is a good place to start looking because you can check power from fuelpump relay which connects through it to the fuelpump.

Reset Inertia sensor by pushing button on it to reconnect.power.

Please rate my info.

Dec 20, 2012 | 2001 Ford F250 Super Duty Super Cab

1 Answer

2001 2500hd chev no power to fuel pump.


Sometimes the ground wire to the fuelpump goes bad. Depending on which wire it is, you can bypass, but be sure the fuelpump can cut off properly. I have seen people spend $300 plus on a new fuelpump they did not need.

Being a ground wire, many people started working on the power side of the problem first and overlooked the ground system.

Mar 29, 2012 | Cars & Trucks

2 Answers

Have a 2000 gmc truck. It starts when you spray fluild in the injection but not sound from the fuel pump. And the truck was roll over, do i need to do a reset on it and if so how?


First check the fuse for the fuel pump, listed in the manual and also on the lid to the fuse box. Then check for power going to the pump, if there is power and no pumping, then the pump needs replaced. The pump is located in the fuel tank and you will have to drop the tank to get to it. The come out easy and replace easy, just getting the tank dropped is the bear. No resets that I am aware of and I been doing this for quite a while now.
It is possible that when it rolled over a wire got torn loose on the underside of the truck and this could be the problem.

Feb 24, 2011 | 2000 GMC New Sierra 1500

1 Answer

When i first tune the key on the fuel pump dose not engage. I checked the battery and charging system and both are good, but if i jump the car or hook up my battery charger on start mode the fuel pump...


Alot of times a bad fuelpump will run with the extra voltage not often but sometimes, i would check the power voltage and ground at the fuelpump, this is the only way to know for sure, if you get 12 volts and have a good ground at the fuelpump then i would say the pump is bad, check all wires going to the battery, make sure there are no loose wires or connections at battery terminals and try changing the fuelpump relay with another one and see if that helps, a bad relay can also cause this, good luck.

Feb 12, 2011 | 2000 Lincoln Town Car

1 Answer

Gmc yukon turns but will not start dont hear the fuel pump on in the fuel tank


With ignition key on run, use test light to verify you have positive & ground to fuelpump. No power (positive) check fuelpump fuse. No ground check fuelpump relay. If both positive & ground fuelpump needs to be replaced.

Jan 17, 2011 | 1993 GMC Yukon

1 Answer

Trying to locate emergency fuel shut off switch to reset it. any thoughts?


There is no switch of that kind, the most common problem would be a bad fuelpump, a quick test is to have someone crank the engine while youi beat on the bottm of the fuel tank, this sometimes shake the pump and gets it going, truck may start if it does then you will know its a bad fuelpump and needs replacing, the pump is located inside the fuel tank. if truck doesnt start then the best thing is to test for power at fuel pump connector and if theres power to it then replace it.

Dec 24, 2010 | 1994 Jeep Grand Cherokee

2 Answers

I have replaced the fuel pump amongst a lot of other things. I can spray gas or starting fluid in the throtal body and it will run rough untill the fumes ware out. Its a 1995 ford explorer 4x4 xlt


If you hear the fuelpump operate the first 1 or 2 seconds when the key is turned to RUN position, the fuelpump is working. If you do not hear the fuelpump run, check the Inertia switch which should be in the side panel of the rear cargo area. If you have an owners manual check for the Inertia switch location.

To reset the Inertia switch, hold the button on it for 2-3 seconds. You should now hear the pump run. You may also have a fuelpump relay under the hood in one of the Powerboxes. The Powerbox may have a fusible link from the Battery. When the fusible link is OK and the Pump Relay is OK, there is a fuse in the Fuse panel. Then finally the Ignition switch will trip the Pump relay. As power flows through the wire to the fuelpump the Inertia switch can break the power connection.

So you have 5 powerpoints before the fuelpump will work. Fusible link, Pump Relay, Fuse Panel, Ignition Switch,and Inertia switch. These must all work before the fuelpump can run.

Aug 14, 2010 | 1995 Ford Explorer

1 Answer

Fuel pump not getting power checked fuses and relay and fuel pump is relay board bad


Check in the trunk on the drivers side for an opening in the carpet. There can be 2 switches and 1 is for the Air ride and the other is a fuelpump safety switch. The safety switch is called an "Inertia switch" and it has a push button for Reset. Just hold the button down for 3 seconds and it will reset.

Then turn on the Ignition and you should hear the fuelpump run for a few seconds. It should be ready to start. If the Inertia switch was tripped it is made to kill the fuelpump upon impact. Slamming a door or the trucklid can make it kill the fuelpump.

Jul 25, 2010 | 2003 Mercury Grand Marquis

1 Answer

New fuelpump & relay, fuelpump want come on.


check all those item again, especially the crank sensor, check the fuel pump by adding 12v to it, make sure its good. tun on key, make sure your getting 12v from fuel pump wire

Jul 30, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
2000 Audi TT Logo

526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13566 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...