Question about 2002 Pontiac Grand Prix

2 Answers

Repolacement fuse? Is there a way to replace the fuse int he windshield washer pump...I cant seemt o find the fuse that runs this...

Posted by on

  • 1 more comment 
  • melissab77 Oct 21, 2008

    Same problem, we change motor and all in one dash switch and still nothing...... :(

  • Anonymous Mar 29, 2009

    wipers work, however no fluid is being pumped.No typical pump noise when applying this function

  • Anonymous May 25, 2009

    My pump for the winsheild fluid has also stopped working. Thanks for the input, I could not find the pump and I never thought of taking off the wheel and removing the wheel well cover. I am going to try it this week.



    Cheers.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The fuse to your washer pump is shared with the wipers themselves. If your wipers work, then your pump should. I just had the same problem. You can replace the washer pump for $20. It's located behind the front passenger's side wheel well. Just remove the passenger wheel and wheel well covering to access the washer tank, and the motor. The pump pulls off, after removing the electrical plug and fluid line. When you pull the old pump out, the washer fluid will gush out. If you want to save any of this fluid, you may want to find a cloth or something to stop the flow. The new pumps snaps in quit easily.

Posted on Dec 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is no fuse for this. Your pump is bad I would guess.

Posted on Nov 08, 2008

  • bendrinkin Dec 07, 2008

    I just replaced the pump in my 2002 grand prix gt.

    Let me know if you want help..

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a fuse for windshield washer pump on 1997 Infiniti I 30


Probably. It should be marked on the fuse panel. If the washers don't work and you cant hear the pump motor running, the pump motor may have seized. The motor will be at the bottom of the washer fluid bottle. I have no idea where the washer bottle is on an Infinity but if you find where you fill the washer bottle up, follow the tube or pipe to where It goes and you will find the pump motor underneath. The pump motors are usually just pressed in and held by small plastic clips.

May 26, 2015 | Infiniti Cars & Trucks

2 Answers

Windshield washer fluid quit working on my 2011 Freightliner Cascadia


There's a few things you might want to check. First, check to make sure the washer fluid reservoir is completely (assuming you hadn't already done that). After you are certain the reservoir is full, look for any possible leaks...either the reservoir or the hoses going from the tank to the windshield. If the tank and hoses are intact, turn on your windshield wipers...then try running the pump. If no washer fluid comes out, and for this you might need another person to assist you, try running the pump again...listening to make sure the pump is in fact running. If the pump does run but still no fluid comes out, inspect all of the hoses as well as all of the outlets where the fluid sprays the windshield...it is possible that the outlets may be plugged. Some common reasons for the outlets to be plugged...debris, dirt/mud, and/or wax (has anyone recently waxed your Freightliner?). Just to be sure, using a small needle or even a wire, ensure each outlet is cleared and not obstructed with anything. After that, try running the pump again. If no luck, try removing the hoses going from the tank to the windshield. Once removed, using something like a wire coat hanger, clear each hose for any possible obstruction. Reattach hoses and try running pump again. If still no luck, I would guess the problem might be located with the washer pump itself. Before opting to replace the pump, if you believe that is the problem and the pump just doesn't operate, check all fuses and inspect any/all wiring connections.

Good luck
Jason

Jun 24, 2014 | Cars & Trucks

1 Answer

I cant get my windshild washer to work how can i tell if is te pump or the fuse


The horn and washer pump are on two different circuits, but I suppose there could be something going on in the steering column wiring harness.
Can you hear or feel the pump run in the tank when someone engages the pump switch ? Have you unplugged the pump and checked for voltage and ground ?

Feb 03, 2013 | 2003 GMC Yukon

1 Answer

What fuse works the windshield washer pump on a 2006 mustang


No they use the same fuse. The pump motors do go out. they are easy to change

Jan 04, 2012 | 2006 Ford Mustang

1 Answer

How to replace the windshield washer pump(front)


The pump is located on the washer fluid tank, it just clips int the tank. you just un clip it, and pull it out of the tank. Good Luck

Jan 13, 2011 | Oldsmobile Silhouette Cars & Trucks

1 Answer

Windshield washer fluid barely sprays then quits. Does not spran on rear window at all. Good fuse and can hear motor running. 2006 kia sorento


windshield washer hose could have a hole somewhere have some one run washer pump while you check under hood for leaks if you cant find any then its safe to assume that pump is worn out still turns but the pump suction is worn out, must be replaced.

Jan 14, 2010 | 2006 Kia Sorento

2 Answers

Washer doesn't work and I can't hear the pupmp motor working.


The windshield washer pump is part of the windshield wash reservior.
There is an electrical connector located on the bottom of the reservior.
That is the pump .
If the pump is not in the reservior. I would just trace the washer fluid lines from the sprayer on the vehicle back to the pump. The lines just might lead back to the reservior for the windshield wash solution. Then you will have confirmed the pump is in the reservior.

You may have to get a new reservior. The pump might not be seperate item, I am not 100% sure on that.

I also would double check the fuses and any relays related to the washer pump.

Finally, I would check the washer switch if you replace the pump and still is not working .

Good luck

Mar 31, 2009 | 2002 Chrysler Town & Country

3 Answers

Windshield washer Pump doesn't run, but the pump checks out good


there is another small relay box just below the windshield washer reservoir about 11/2" wide x about 4" long the washer pump relay is in there



Nov 23, 2008 | 1999 Ford Explorer

1 Answer

Winshield washer motor does not run


These days, most windshield washer pumps are mounted to the bottom of the washer fluid reservoir. Where’s that, you ask? Well, inner+fender+w+text.jpgyou know that spout you pour the fluid into—the one that disappears into nowhere? Well, the reservoir is actually 2384f71.jpglocated inside the front fender between the bumper and the front wheel. To replace the pump, you will have to jack up the vehicle, remove the front wheel and then remove the inner fender liner.

Jun 08, 2008 | 2001 Honda Civic

Not finding what you are looking for?
2002 Pontiac Grand Prix Logo

1,733 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...