Question about 2006 Chrysler Crossfire

1 Answer

Manual shift knob removal for chrysler crossfire

I would like to found out how to remove the stock manual shifter knob from my 2006 Chrysler crossfire and replace it with a leather shift knob.

Posted by on

  • Anonymous Mar 30, 2009

    idk im trying myself its a pain

  • raceguy239
    raceguy239 Nov 14, 2012

    You Unsnap the leather boot from the counsel and unscrew the nut underneth the knob then do it in revers to put on

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 363 Answers

I think there is a set screw in the side you have to loosen and then unscrew knob

Posted on Jul 24, 2009

1 Suggested Answer

  • 174 Answers

SOURCE: I'd like to replace the stock shifter knob (or

Usually there is a nut on the bottom of a shift knob that needs to be loosened, then the knob just screws off. Use a wrench, if it's hexagonal, if it's just round or there is no nut it may just screw off. It will be really tight though, be prepared to have to really crank on it to get it loose. The new one should just thread back on. You may need to install a nut on the bottom to adjust the rotation of any pattern or gear shift diagram on the new one.

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I remove the gear shift knob?


Re: Shift Knob removal - Cadillac Forums

www.cadillacforums.com/.../cadillac...cadillac.../91852-shift-knob-remo...

Dec 3, 2006 - 15 posts - ‎10 authors
Hello everybody, Two days ago I changed the shift knob on my '97 ... On newer SLS & STS, GM move the clip "inside" the shifter... it is a internal split ring spring. To removethese knobs... gently wiggle the knob back and forth ... Automobile(s): 98 Deville, '15 Ford Fusion Hybrid Titanium, '12 Ford Escape. how to remove shifter knob center console
2 posts
May 19, 2011
How to remove center wood grain peice by shifter to ...
8 posts
Sep 14, 2009
how do i remove shifter nob
15 posts
Apr 9, 2009
How to take off the shift knob?
11 posts
Jul 8, 2008
More results from www.cadillacforums.com

2007 cadillac DTS: replacing..the leather gear shift knob ...


Feb 03, 2016 | Cadillac DTS Cars & Trucks

1 Answer

How do i remove the shift cable from a pt cruiser gt5 speed


Chrysler PT Cruiser shifter cable bushing replacement ...

? 5:28
https://www.youtube.com/watch?v=akgIKm1pQLM
May 21, 2014 - Uploaded by MotorCity Mechanic
Chrysler PT Cruiser shifter cable bushing replacement ... Part 1/2: 1999-2003 Jeep Grand Cherokee 4.0 ...

PT Cruiser manual stick shift cable bushing tip - YouTube

? 3:18
www.youtube.com/watch?v=mU0sgQn-0qw
Jun 19, 2015 - Uploaded by Justin Shiffler
PT Cruiser manual stick shift cable bushing tip ... how hard was this to replace? my right bushing is gone and ...

Shifter cable broken for the third time - YouTube

? 1:06
www.youtube.com/watch?v=MiHSkqSrsLY
May 8, 2013 - Uploaded by CJ Turner
Shifter cable broken for the third time ... Chrysler PT CruiserBrake Light Switch Replacement, Shifter Stuck .


Oct 29, 2015 | Cars & Trucks

1 Answer

Car slips out of first gear


It is possible that the shifter linkage is not aligned/adjusted properly. If not that external problem then there is an internal spring in the shifter pawl mechanism that may be broken and you if you cannot access and fix this yourself you will have to take it to a transmission shop or a Chrysler dealer to get if diagnosed and fixed.

Sep 08, 2014 | 2004 Chrysler Crossfire

1 Answer

How to install a center console on a pacifica


Hi Melissa, I'm glad to help, here is the instruction below I said I'd send. Have an awesome day.


23 - Body/Interior/CONSOLE, Floor, Front/Removal REMOVAL [img id=LOPTableImg src="https://w05.dealerconnect.chrysler.com/service/mds2002/common/images/collapse.gif"> Click to display a list of Labor Operations associated with this procedure 1. Remove shift bezel. (Refer to 23 - Body/Interior/BEZEL, Shifter - Removal) .
2. Remove transmission range indicator surround bezel Figure 1.
3. Remove two screws attaching front floor console to the lower instrument panel Figure 2. 4. Open cup holder and remove two attaching screws to bottom of cup holder. 5. Open bin and remove two attaching screws to bottom of bin. 6. Remove front floor console sidewall attaching screws, three per side. 7. Raise front floor console and disconnect wiring harness. 8. Remove front floor console from vehicle.
374297.jpg Figure 1 - TRANSMISSION RANGE INDICATOR SURROUND BEZEL 1 - INSTRUMENT PANEL 2 - AUTOSTICK SHIFTER ASSEMBLY 3 - TRACTION CONTROL SWITCH 4 - TRANSMISSION RANGE INDICTOR SURROUND BEZEL 5 - KNOB SET SCREW 6 - SHIFTER KNOB 7 - FLOOR SHIFT BEZEL 8 - WIRE CONNECTOR 9 - INSTRUMENT PANEL WIRING HARNESS 10 - INSTRUMENT PANEL WIRING CLIP
374299.jpg Figure 2 - FRONT FLOOR CONSOLE 1 - FORWARD CONSOLE CLOSEOUT PANEL 2 - CLOSEOUT PANEL PUSH PIN RETAINER 3 - INSTRUMENT PANEL WIRING 4 - FLOOR CONSOLE BASE 5 - FRONT FLOOR CONSOLE ATTACHING SCREWS TO LOWER INSTRUMENT PANE AND BASE 6 - FRONT FLOOR CONSOLE WIRING CONNECTOR 7 - FRONT FLOOR CONSOLE 8 - ATTACHING L-BRACKETS

May 17, 2014 | 2006 Chrysler Pacifica

1 Answer

How can I remove the gear shift knob?


Mine is a screw on - try unscrewing it. If not, look for a set screw in base that has to be loosened.

Feb 26, 2012 | 2005 Chrysler Crossfire Coupe

2 Answers

I NEED TO LOCATE THE FUSE BOX IN A CHRYSLER CROSSFIRE 2006 MODEL


The fuse box for is located on the drivers side under the hood near the break master cylinder on the fire wall. Was just having the same problem since I lost my manuals. Let me know if you find a diagram of the fuse block. :D

Dave,

Jun 13, 2011 | 2006 Chrysler Crossfire

1 Answer

We have a 2006 Chrysler 300 V6 and today when I tried to shift from park to drive it would not move it was stuck. What to do?


I also have an 06 300 3.5 that did the same thing. I was informed that they would have to replace the shifter.($350+) before I let them do that to me I removed the center portion of the console so I could manually unlock the shifter. But have also been told that there is another switch attached to the brake pedal. The brake lock solenoid. Seems there have been multiple problems with this switch.

Dec 17, 2010 | 2006 Chrysler 300

1 Answer

2004 Chrysler crossfire stuck in park and cannot tow


remove the shift solenoid by the shift cable inside the vehicle. then wire up the solenoids lock to the shifter to tow

Jun 09, 2010 | 2004 Chrysler Crossfire

2 Answers

2004 chrysler crossfire resetting service light


Disconnect negative battery post for 30 seconds & reconnect. This action will reset the car's computor & remove the light.

Jan 07, 2010 | 2004 Chrysler Crossfire

1 Answer

I'd like to replace the stock shifter knob (or


Usually there is a nut on the bottom of a shift knob that needs to be loosened, then the knob just screws off. Use a wrench, if it's hexagonal, if it's just round or there is no nut it may just screw off. It will be really tight though, be prepared to have to really crank on it to get it loose. The new one should just thread back on. You may need to install a nut on the bottom to adjust the rotation of any pattern or gear shift diagram on the new one.

Nov 11, 2009 | 2007 Chrysler Crossfire Convertible

Not finding what you are looking for?
2006 Chrysler Crossfire Logo

1,026 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...