Question about Mitsubishi Diamante

1 Answer

Unable to shut the windows...none of the four windows close...either from the central or from the individual door buttons....pl. assista

Posted by on

  • kagathra Oct 18, 2008

    how do you do that? i only know to check the fuse...but on the box everthing written in japanese and i cannot work out...which fuse is for the windows....

    Thanks

  • tony yeatman
    tony yeatman May 11, 2010

    Have you checked for power to switches

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 426 Answers

Sorry but without the right tools and the complex nature of tracing wiring you may have to resort to an electrian who shouldnt take more than an hour to diagnose and possibly fix as it sounds like a main power switch,relay or fuse that has failed and they are not hard to trace or fix

Posted on Oct 18, 2008

  • tony yeatman
    tony yeatman Oct 18, 2008

    I meant for an electrician as they do it all day every day and to them its simple

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my central locking will not open or close from my key fob


Check with your Ford garage if its a fob that contains a miniature battery that has died on you.

Jan 08, 2015 | 2008 Ford Focus 2.0

1 Answer

Thank you for helping me with the other problem i had I now have another question for u I have an ford au and I shut the door and pushed the central locking button sometimes it locks all doors sometimes it...


Sounds like the door close sensing switch is not making good contact all of the time. With the door open, try to lock the doors. If you get the 3 beeps, then it confirms that the button is not making when the door is closed. You may be able to adjust the button to make it stand out a bit...or just place a sticky-back felt tab on the door where the button touches...that should fix it.

May 25, 2014 | Cars & Trucks

1 Answer

Audi a3 1999, central locking fob won't lock the doors,need to do it manually, doors won't shut properly need to bang them hard, hazard lights come on sometimes when engine switched on


hi jamie,to reset the system,unlock the door/hold key over(windows will go down),then lock/hold key over(windows will go up/sunroof will close)then press unlock button on remote for 30 secs,RESET DONE.(if this dont work renew the battery in remote/reset again).geoff.

Nov 06, 2010 | 2002 Audi A4

1 Answer

When, a key lock sing blinks on the dash of hummer H3, and will not start, what can i do ?


make sure all windows are closed
get out of the Hummer, using the central lock, lock the 4 doors
close the door
then open it with the KEY
then try to Start the Hummer.
(repeat several times till it works)
I am facing this problem now and that is the only soluttion I found. Untill i buy a new remote key that got stolen :S

In order not to fall in this problem, avoid opening the hummer with the key and directly locking the four doors using the central lock before starting it.

Sep 04, 2010 | 2006 Hummer H3

1 Answer

Central locking in my bmw 320 diesel isnt working it wont open the doors but it will start the engine , the spare key is the same so its not the battery of the keys


Providing central locking works when you insert key in lock,try programming keys
Enter car make sure all doors/windows are shut
Switch ignition on and off,remove key
PRESS AND HOLD UNLOCK BUTTON ON KEY
Press lock button on key 3 times whithin 10 seconds and release unlock
Central locking will lock/unlock rapidly to confirm reset
If your key is the type with bmw logo in the middle battery replacement is not possible,as it charges as you drive

Jun 21, 2010 | 2004 BMW 3 Series

1 Answer

When i turn the key to lock my car the door locks but it does not beep or set the alarm. the windows completly stopped working and when i lock the car it will sometimes not lock at all


open tailgate...central locking pump/air compressor is situated rhs under mat against bulkhead.should make whiring noise if okay. now try this... put key in drivers door hold key over to lock position buttons should go down and any windows that are open will close...to reset system unlock/hold key over... all windows will open fully. then lock hold key over.all windows will shut.take key out.leave for 30 secs.....

Feb 11, 2010 | 2001 Volkswagen Golf

1 Answer

I have a 2000 cherokee classic. window lock problem?


Before changing the switch, I would check connections. The connection problem would be in the master switch...the one in the drivers door.

Sep 30, 2009 | 2000 Jeep Cherokee

1 Answer

1997 BMW Convertible driver/passenger windows won't go down


I had a similar problem with a '95 Olds. Turned out that the wires between the door frame and the driver's side door had broken from the constant flexing of the door opening and closing.

Jun 11, 2009 | 1997 BMW 328

1 Answer

Driver door central locking


More than likely your front driver door module has failed.  You will need to replace this module and readapt the key fobs for locking and unlocking

May 29, 2009 | 2002 Audi A6

1 Answer

Recode a key 4 bmw 318i cenral locking


To carry out this procedure you need to have one working key and one key which requires programming. It may help sometimes to hold the key close to the rear view mirror as this is where the sensor is located in most models. 1. With both keys, get in the car and close all windows and doors. 2. Put working key into the ignition and turn to position 1 (the accessories should turn on) (try also position 2) 3. Turn the key back to position 0 and take the key out of the ignition. 4. Using the working key, hold down the unlock button, press the BMW logo (lock button) 3 times, and release the unlock button. Doors should lock and unlock. 5. With the new key, hold down the unlock button and press the BMW logo (lock button) 3 times and let go of the unlock button. Doors should lock and unlock and you're done!! If not working try the following PREPARATION 1. Close all doors, trunk, hood and sunroof. 2. The security system must be in 'disarm' mode. The key must be removed from the ignition key slot. ENTER CODE LEARNING MODE 3. Open trunk and leave it opened. 4. Open the drivers door and sit in the drivers seat. 5. Close the drivers door. 6. Cycle the ignition switch 5 times between the 'OFF' position and position 2,(ignition 'ON', all dash warning lamps will illuminate). The red status LED will illuminate continuously, and the siren will 'chirp' once, to indicate that the code-learning mode has been initiated. ?Do No start the engine.? The Ignition switch cycling in step #6 must be performed within 10 seconds. The sequence in steps #1-#6 must be performed within 45 seconds. REGISTER/DELETE ID CODE(S) 7. Open drivers door, (remain seated in the drivers seat) 8. Close the drivers door. 9. Press and release any button on the remote you wish to register in the system. The status LED will shut off momentarily to indicate that one code has been registered. 10. Repeat steps 7 thru 9 to register the three ID codes. It is possible for the system to memorize a total of 4 different ID codes. As a new code is initialized into the memory, the oldest code is automatically deleted. If you had lost your remotes and wished to delete the lost remote ID codes from the memory, you could initialize the ID codes from a newly purchased replacement transmitter four times thereby deleting the previous ID codes from the system memory. EXITING CODE - LEARNING MODE: 11. Open drivers door, and exit from the vehicle, leaving the door opened. 12. Close trunk. 13. Close drivers door. The LED will turn off and the siren will 'chirp twice. 14. The initialization procedure is now completed; Test all remotes to confirm operation. If this doent work your alarm/central lock needs to be reset

Mar 28, 2009 | 1996 BMW 318

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...