Question about 2000 Isuzu Trooper

2 Answers

Isuzu trooper 3 litre diesell oo year!

I am changing the fly wheel and i was wondering the setiings to line up the sensor on the back of the fly wheel.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 235 Answers

Set the engine on #1 tdc and the small half moon cut out  on the flywheel goes at 6 o'clock . The sensor is now set to read the crank angle .
This is for the manual gearbox ,if you got auto its at 12 o'clock.

Posted on Oct 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Isuzu Master
  • 450 Answers

With no1 at TDC mark is on balancer and can take off top cam belt cover to check that cam gear is timmed on mark at 12 O clock there is notch in edge of flywheel that should be put at 6 O clock (facing down) it is hard to see with flywheel on engine look closely

Posted on Jul 28, 2009

  • Steve Hurc
    Steve Hurc Jul 28, 2009

    the 1st post was for manual

    the mark goes at 12 O clock on flex plate(ring gear) with crank and cam gear on timing marks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the crankshaft positioning sensor located on 1998 isuzu trooper 3.5?


i can answer for USA, but not in Canada.
why not post symptoms and make this 10 x more easy.
huh?
(CKP 101 class)
the crank sensor if fitted (some engine have none before 1996)
can only be in 3 places 4 deeper.
at crank front pulley (behind)
in mid block (yes funny placed) Bingo?
at fly wheel edge or hidden behind it (trans pulled then fly)
so where is yours. well, the fsm covers this or on any car you can attempt to buy one for free at any online dealers parts pages.
if full graphic details of it and its placement.

the 6VE1 engine, knowing the engine real name make finding facts 10x more easy and free photos of all parts on it, "goggle that"

lets try the free way. isuzuparts.com
but they have no photos of all engine parts, but do sell it. CKP,$$$

just answers dot com (ASE pros)
states (first google hit btw)
the reluctor ring is located between rod bearing 2 and 3

finding some parts for Isuzu cars, is very hard lacking real dealers with all parts. but you can buy this in any store. after market parts abound, you can not mix sensors from one engine to the next.
do not attempt that, match your engine, and year,!

there it is, does a photo make it easier to find?
25491390-s4ytlrl2eq1g0qp4vyp302wy-3-0.jpg

Feb 27, 2015 | 1998 Isuzu Trooper

2 Answers

What is crank position sensor on Isuzu trooper 2002 3tdi


What is? It tells the ECU what position the crank is in to control timing.

Feb 13, 2015 | 2002 Isuzu Trooper

1 Answer

Why does my Trooper take 30 minutes to warm up before intermittent power surging and panel lights blinking stops?


Need to know more. Is it petrol or diesel. If diesel is it the 3.1 or 3.0. Isuzu changed engines that year (1998) from 3.1 to 3.0 common rail.

Aug 11, 2014 | 1998 Isuzu Trooper

1 Answer

No fire on all coil packs Change crank sensor on 1995 izuzu trooper 3.2 litre


right front wheel arch, lift up rubber flap, look through to side of engine block and crank sensor is next to engine mount bracket

Apr 02, 2014 | 1994 Isuzu Rodeo

1 Answer

How do I locate/replace crankshaft senor on my Isuzu trooper 3 litre diesel car 2001 year .I have been told this is a big job coouls nayone advise please


Its an easy job if you can get the car up high - like on a ramp .just one plug and one bolt to do .
The sensor is behind the exhaust pipe in the clutch bell housing in line with the main oil filter .

Jun 07, 2010 | 2001 Isuzu Trooper

1 Answer

Brake indicator light


open the break pipe near to wheel cilenders take out the air from the pipe then the light will be normal and also check the fuse.

Jun 30, 2009 | 2000 Isuzu Trooper

1 Answer

Need torque settings for dual mass flywheel in 3.0 isuzu trooper


diesel 4JX1 engine
apply engine oil to threads
1st- 59Nm(43lb ft)
2nd- 60-90deg.
3rd- 60-90deg.

Jan 03, 2009 | 2001 Isuzu Trooper

2 Answers

Fly wheel problem on a jeep


if its a 4JX1 diesel, yes it goes in 1 spot yet it can be bolted up in every location
put crank pulley timing mark to TDC can also check by removing cam belt top cover and check timing mark aligned up with mark at 12 O clock then flywheel has small notch in edge that must go at 6 O clock (facing down) look closely it is hard to see due to flywheel sunk into back of block.

Oct 19, 2008 | 2000 Isuzu Trooper

1 Answer

Isuzu trooper problem!with a 00 3 litre diesel engine not starting


Was it lined up right as the trigger point for the sensor is important.Is the fly wheel fitted one position only that the bolt holes line up or will it fit no matter which position it bolts up Line up the flywheel trigger with the sensor after you have put the engine to Top Dead Centre.Put at tdc and see if the trigger and sensor are together.

Oct 18, 2008 | 2000 Isuzu Trooper

Not finding what you are looking for?
2000 Isuzu Trooper Logo

Related Topics:

547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...