Question about 1991 Oldsmobile Cutlass Ciera

1 Answer

Ignition switch replacement

Need Instuctions

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Oldsmobile Master
  • 63,801 Answers

You will need to remove the steering wheel, if you have an airbag disarm it, this is very important, disconnect the battery and unplug the airbag diagnostic monitor, then remove the large nut retaining the wheel to the steering shaft, you will need a steering wheel puller to get the wheel off, very cheap tool avail from most parts stores, after the wheel is off remove the turn signal switch and move it to the left, under that switch you will see the pin that retains the lock cylinder, it will be a cross point screw, remove it, with the key turned to on remove the lock cylinder.

Posted on Oct 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program this remote start . I just got this for a replacment one and It never came with the instuctions Please help me?


Instructions
    • 1 Climb into your Jeep Grand Cherokee with your keyless remote(s) in hand and your manual ignition key. Do not close the driver's door.
    • 2 Hit the "Lock" switch on your driver's side door and insert the key into the ignition.
    • 3 Turn the key to the "Run" position and aim the keyless remote at the steering wheel. Press and hold the "Lock" button for five seconds.
    • 4 Wait for the locks to respond by cycling then program each successive remote (up to four total) by holding the lock until the locks respond. Each remote must be programmed within 20 seconds of the last.
    • 5 Turn the key in the ignition back to the "Off" position then quickly back to the "Run" position within 20 seconds of programming your last remote.
    • 6 Turn the car off and remove the key from the ignition to complete the programming sequence.

hope this helps

Jan 19, 2015 | 2000 Jeep Grand Cherokee Limited

1 Answer

Need removal instuctions for a jake brake


The jake brake is actually built right onto the heads they block your exhaust to slow down compression. Its actually called an engine brake. But if you wantvto remove them you will have to order new heads but why not just turn the switch off for the jake brake or maybe replace it

Nov 04, 2014 | Cars & Trucks

1 Answer

Kexus ignition switch replace


To troubleshoot these issue, for ignition switch replacing procedure:---
Click the link below:---


IGNITION SWITCH REPLACING

It depends on vehicle to vehicle. But it's not very difficult on mot of cars to replace ignition switch. Basic theory of replacing ignition switch is same for all car models. -----

To replace ignition switch on your vehicle, I suggest you few helplinks with proper ignition switch replacing procedure. View its details and you can replace ignition switch on your vehicle.

-------------

Click the link below: ------

----------

How to remove ignition switch on VW Car models?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-ignition-switch-on-vw-car.html

-------------

How to replace Ignition Lock Cylinder on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-lock-cylinder.html

--------------


Ford Taurus: Ignition Switch & Steering Column Replacing?

http://repairhelpcenter.blogspot.in/2012/06/ford-taurus-ignition-switch-steering.html

-----------

How to replace Ignition Switch on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-switch-on-acura.html

--------------

How to Replace Ignition Switch on Chevrolet Caprice Classic?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-ignition-switch-on.html

------------

1995 Ford Taurus: Ignition switch not turning OFF?

http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html

-----------

Ignition Switch Will Not Turn Off?

http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html

---------

These will help.

Thanks.

Dec 06, 2012 | 1993 Lexus Es 300

3 Answers

How to replace ignition switch


It depends on vehicle to vehicle.But its not very diffult on mot of cars to replace ignition switch.Basic theory of replacing ignition switch is same for all car models.:-----
To replace ignition switch on your vehicle,i suggest you few helplinks with proper ignition switch replacing procedure. View its details and you can replace ignition switch on your vehicle.-------------Click the link below :----------------

How to remove ignition switch on VW Car models?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-ignition-switch-on-vw-car.html

-------------

How to replace Ignition Lock Cylinder on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-lock-cylinder.html

--------------


Ford Taurus: Ignition Switch & Steering Column Replacing?

http://repairhelpcenter.blogspot.in/2012/06/ford-taurus-ignition-switch-steering.html

-----------

How to replace Ignition Switch on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-switch-on-acura.html

--------------


How to Replace Ignition Switch on Chevrolet Caprice Classic?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-ignition-switch-on.html

------------
1995 Ford Taurus: Ignition switch not turning OFF? http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html
-----------
Ignition Switch Will Not Turn Off? http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html
---------
These will help.
Thanks.


Nov 25, 2012 | Cars & Trucks

2 Answers

How to remove ignition


you need haynes repair manual for 1993 suburban it has photos and information you need to help you replace ignition switch.i am mechanic i use haynes,chiltons and gm manuals.if you are a home mechanic do it your self you need haynes repair manual it has step by step instructions to remove the steering wheel and remove lower steering column reason i say need haynes repair because your steering wheel has a air bag in it you need to see how to remove air bag in steering wheel you need to read through the entire ignition switch removal procedure if you are going to replace ignition switch with keylock cylinder you will also need steering wheel puller. you need a tool compress lock plate to remove lock plate retaining ring from steering shaft in order to get to the ignition switch in the steering column below turn signal switch.

Feb 03, 2012 | 1993 GMC Suburban

1 Answer

When I turn the ignition on the hazard lights flash continuously and the vehicle wont start


sounds like the imobilizer is having headache mate replace the battery in your remote and arm and disarm the alarm this should cure it (you may need to re-program the fob you can find instuctions for this on the internet)

if this helps please let me know
cheers
big mike

Mar 14, 2010 | 2001 Land Rover Discovery Series II

1 Answer

Back fire and hard starts 1991 volvo 740 s.w. do not know where timing marks go on the slant engine


I had very simular problems. Is it running hard with the tach bouncing. I replaced my ignition module with one from Ebay $25 delivered. They run about $120 new Bosch is the best. I also first looked over the whole ignition system and the fuel system only to find a flakey Ignition module. there is a computer to give you codes as well and it is easy to do. It has flashing codes. You can find its instuctions and fault codes on brickboard.com.

Hope this helps

May 08, 2009 | 1991 Volvo 740

1 Answer

Ignition switch


  1. Remove the turn signal and windshield wiper switch.
  2. Disconnect the ignition switch electrical connector.
  3. Remove the two ignition key reminder switch screws.
  4. Remove the ignition switch screws and remove the ignition switch.
Installation

To install, reverse the removal procedure. Check for proper operation of the ignition switch.

Nov 04, 2008 | 1992 Mercury Tracer

1 Answer

Fuel Filter


FUEL FILTER REPLACEMENT
1. Reduce the internal pressure of the fuel pipes and hoses by completing the following operations. (1)
Disconnect the fuel pump harness after removing the rear seat cushion. (2)
Start the engine and after it stalls, turn the ignition switch OFF. (3)
Disconnect the battery negative (-) terminal.
bf8695b.gif (4)
Connect the fuel pump harness connector

2. Remove the bolt connecting the fuel line with the fuel filter. Cover with a shop towel to avoid gasoline from splashing. 3. Remove the fuel filter mounting bolt, then remove the fuel filter from the fuel filter clamp. 4. After replacing the fuel filter, check for fuel leaks.
1ff5185.gif

Jun 09, 2008 | 2001 Hyundai Tiburon

Not finding what you are looking for?
1991 Oldsmobile Cutlass Ciera Logo

Related Topics:

672 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...