Question about Mitsubishi Galant
Try smacking down on the hood with a open hand.You may want to have someone inside to pull the lever while you hit on the hood.If you do get it open spray everthing down with a good lubicant.Well good luck and hope this helped.
Posted on Jan 24, 2010
Testimonial: "It worked just fine .I also used some wd40.Thanks"
SOURCE: hood release cable is broken
Is there any part of the cable inside the cabin that you can pull with a pair of pliers? I suggest that you try that. You may need to disassemble it from the pull handle to make that work.
Posted on Dec 27, 2008
SOURCE: Hood Won't Open, and Lever Broke
Hi viper852004 , the only way you can do this is to remove the front grills and then you will be able to see the 2 sprung bonnet pegs, you will need to loosen the adjusting nut where it screws into the hood and unscrew it until it becomes unattatched from the hood, do this for both pegs and then you should be able to release the hood to fix the problem. the pegs will need to be reinstalled before driving the car as the hood will not close, hope this is of some help, regards mark.
Posted on Jan 26, 2009
SOURCE: My hood latch is broken
If the cable link to the latch is rusty or broken you have to take the front grid down. It's relatively easy. It's held there by plastic fasteners. Then reach for the latch with you hand, or the leftover broken cable. Pull it, it should release the first latch, than you just have to get to the security latch, like you usually do to open the hood.
Posted on Feb 17, 2009
2000 FORD SUPER DUTY 5.4 HOOD STICKS.YOU CAN HAVE AN ASSISTANT PULL THE HOOD CABLE AND EASILY OPEN THE HOOD BUT THE HOOD WILL NOT POP UP ON ITS OWN..ANY ADVISE?
Posted on Nov 05, 2009
Tips for a great answer:
Mar 14, 2017 | 2005 Mitsubishi Lancer
Jan 16, 2016 | 2007 Mitsubishi Galant SE Sedan
Jan 26, 2011 | 2005 Mitsubishi Galant
Locate the interior hood-release lever under the dashboard on the driver's side of the interior of the car.
Lift up and toward you on the hood release lever. The lever is connected to a cable that releases the hood. The hood will pop up about 1/2 inch when you pull the lever.
Move to the front of the car and locate the exterior hood-release lever under the front of the hood. It is located near the middle of the vehicle, just beyond where the front edge of the hood meets the body. Lift up on the inner lever.
Lift up on the edge of the hood while holding the inner lever in place. When the hood is up, find the hood prop and raise it, setting its tip in the hood-prop mount on the hood, to hold the hood up while you work in the engine bay.
Nov 26, 2010 | Mitsubishi Lancer Cars & Trucks
Oct 24, 2010 | 2002 Mitsubishi Eclipse
Apr 01, 2010 | 1999 Mitsubishi Galant
Oct 16, 2009 | 2008 Mitsubishi Endeavor
May 30, 2009 | 1998 Mitsubishi Galant
Apr 13, 2009 | 2003 Mitsubishi Eclipse Coupe
Mar 22, 2009 | 1995 Mitsubishi Galant
736 people viewed this question
Usually answered in minutes!