Question about 2002 Toyota Sequoia

1 Answer

Jbl radio in toyota sequoia

Our cd player doesnt accept cd's. It doesnt seem to power up but the rest of the radio works fine including cassette player.

Posted by on

  • 2 more comments 
  • dyamond Oct 29, 2008

    ok they had the radio out of the vehicle, long enough where they had to put the code back in. Everything works except CD player, that doesnt seem to power up at all. We cant even get a CD into it. Any suggestions? It is a JBL multi cd

  • Anonymous Dec 19, 2008

    unplugged and still seems like there is no power to cd player.

  • Anonymous Dec 27, 2008

    I have a 1997 toyota land cruiser that has a cd player that will not take a disk. It is the original radio. I would like to keep the original radio in it. Can you help me with it?

  • Toyota Ed May 11, 2010

    Try this: Remove the radio from the dash. Unplug all of the wiring connectors from the back of the radio. Wait for a minute or 2; then plug the radio connectors back in. If you hear the CD motor start to run, your problem will be fixed...I have had success with this trick; and, for some reason, removing the fuses does not duplicate this fix; the connectors need to be physicaly removed from the radio; try it, and let me know if it fixes itself.



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If I unplug all the wires from the CD player won't the security system lock up my stereo system? Which means that I have to go to a dealer to get the code from them.

Posted on Nov 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Original cd player won't turn on


First Check the fuses. There are two (or three) that run the radio

1 - holds the settings when truck is off (7.5A Acc) - probably not this one, cuz if it fails, lotsa stuff won't work.

2 - turns radio on when key comes on (10A Radio No1) - Check it with a meter, not your eye, the filaments are very fine.

(If you have the JBL system) (30A Radio No2 runs the amp/ subwoofer)

If these are both OK, and you're still having trouble, post back, you may need to remove the radio.......

Feb 26, 2015 | 2007 Toyota Tacoma

2 Answers

2003 Toyota sequoia. Can the dvd system be removed and installed in a 2003 with same JBL radio/CD player. Are the connectors there?


Most radois since 2000 have security systems built into them. If you swap same make vehicles it will plug in, but my not work. You get a lock code on the radio. It can be unlocked at a dealership. You have a 1 in a 1000 chance it make be OK. I've done it, but it was just lucky it worked.

May 19, 2014 | Cars & Trucks

1 Answer

My JBL radio #16833 for Toyota Highlander has no power?


The radio has burned out, no other explanation

Feb 02, 2012 | Cars & Trucks

1 Answer

How do I add an AUX INPUT to my 2006 Sequoia stock radio system?


toyota sequoia with factory radio single cd player--does it have an aux jack (3.5mm)

Feb 14, 2010 | 2006 Toyota Sequoia

1 Answer

CD's won't eject or play, Toyota 2002 JBL system


sorry it needs to be removed and sent to a elctronics repair shop. there is no easy fix.

Nov 17, 2009 | 2004 Toyota Sequoia

1 Answer

2004 T Solara with a jbl 6 cd player. CD started getting and error 3 and would not load. Unplugged Batter now it just says loading and goes back to Radio. Is it a programming issue or bd cd player. Is the...


its a bad cd player, might need an optical cleaning for the cd player might as well a replacement... it trips in a certain given time. hope this helps

Jul 03, 2009 | 2000 Toyota Camry Solara

1 Answer

CD will accept disc but spits it out after a few seconds


Dirty Read Lens. Usually dust.
Dirty Disc Present detector - ditto
Dirty or bad motor drive

To fix:
Blast it with pressurized air from side to side thru the Disc opening when it is open and empty. DO NOT stick the nozzle in more than 2" or you may hit the lens and carrier and ruin it.

Try again 3-4x. If it doesn't get better it is prob the CD motor and will need a techie (like me) to tshoot and fix

Good Luck!

Mar 26, 2009 | 1995 Toyota 4Runner

1 Answer

How to remove radio faceplate on 2003 Toyota Camry?


U don't have to remove anything, just get a laser lens cleaning disk from any store that carries music CD's Walmart has them for about $6

Mar 22, 2009 | 2003 Toyota Camry

1 Answer

JBL Error 1


Error one is unique to the disc being inserted into the player.
According to the service manual, this is the exact statement:

Err 1 appears on the display:
This indicates that the disc is dirty, scratched, damaged, incorrect (as in a "burnt" disc), or has been inserted upside down. Clean the disc or insert it correctly.

Toyota CD players are very sesnitive, and the svc manual specifically mentions not to use anything other than "store-bought" CDs.

Jun 03, 2008 | 2001 Toyota Sequoia

Not finding what you are looking for?
2002 Toyota Sequoia Logo

1,106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...