An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: service engine soon
You have to time this perfectly or else it won't work.
Turn ignition switch on, after 3 seconds pump gas pedal five times. Once 15 seconds has passed hold pedal down for more than 10 seconds. The code will start to flash via the check engine light. Take your foot off the pedal. Watch it for a while, it will continue to flash the codes in a loop. To clear, hold the pedal down for more than ten seconds.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You'll need to know why the service engine light comes on, they can check this by using a OBD II diagnostic tool to find the trouble code stored in the pcm, ask them to run a check on it, or you can take it to a mechanic before you buy it to have them check over the vehicle for any minor or major problems.
the service engine light is prob due to the oxygen sensor being damaged, not replace or you having the catalytic converter taken off---just messing with you. start at auto zone and have then do a free code read then go from there. you should troubleshoot the low fluid level switch for your brake fluid. unplug it and see if the light goes off and if it doesn't jump the two terminals on the harness. oh the car will have to be running. Let me know MrRodneyLong@gmail.com