Question about 1998 GMC Jimmy

1 Answer

Tranny lines just can't get to 13 m bolt at rear these lines go down the frame rail drivers side?is there a tool to get to this bolt or another technic?>

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with ALL of the bolts in my truck. My boyfriend had to go out and buy a set of flare nut wrenches to even get the dumb fuel filter off. I don't know if it helps or will even work but it appeared easier with these type of wrenches.

Posted on Nov 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is fuel filter on a delta 88 1997


The fuel filter location is under car on driver's side, about a foot in front of the rear tire . below the rear driver's side door.
It has a threaded fitting on one end, and a snap on fitting on the other end. . It is in a bracket that is bolted to the frame

Nov 17, 2016 | Cars & Trucks

3 Answers

Where the fuel filter is located on a ford expedition 2002 5.4 liter


The fuel filter is located on the inside of the frame on the drivers side. Should be a little behind the drivers door. You will need a special tool to remove the lines that go onto the filter. You can buy the tool at most automotive handy stores (canadian tire, part source and so on). If you have any more questions please ask I would be glad to help

Jan 15, 2011 | 2002 Ford Expedition

1 Answer

Where is the fuel filter locaded on the van


You need to have the fuel tank almost empty, relieve fuel pressure, detach both cables to your battery (red by the relay box, black on the driver side strut tower), jack the rear of the car and put jack stands.

Put a piece of plywood between your jack and fuel tank (tranny jack works better), loosen the bolts holding the fuel tank straps, lower the tank. Your fuel filter will be on the rear of of the tank, tucked atop the rear frame rail. Loosen the fuel hose clamps, and one bolt holding the filter to the frame. Careful, you will have some fuel spill.

Dec 01, 2010 | 1996 Dodge Caravan

1 Answer

Changing the fuel filter


Your gas tank is in the back of your car between the frame rails. The fuel line runs up toward the engine along the drivers side frame rail on the inside of the frame rail. The fuel filter is located along that fuel line inside the drivers side frame rail, about at the back of your front door. You should be able to trace the fuel line all the way to the intake of your engine. Once you locate the fuel filter, you will need a special tool to remove the filter from the line. You should be able to get the 'fuel filter tool' at your local auto parts store for under $10. The tool has a flanged end on it, and it 'scissors' open and closed. Place the proper sized end on your fuel line just in front of the filter so that the flange sticks in toward the filter. Gently push the tool in toward the filter, while pulling back on the fuel line. The line should come disconnected. Remember, the fuel line is pressurized and may spray gas for a second or two when it comes apart. Then do the same to the other end of the fuel line. Good luck. Any problems, write back.

Jul 31, 2010 | 2002 Ford Escape

1 Answer

Where is teh fuel filter located on my 99 yukon


The fuel filter is located under the vehicle on the inside of the frame rail,drivers side.no special tool is required. A 5/8 line wrench to break loose the fuel lines. There is one bolt that holds the bracket to the frame you'll have to remove. Use caution due to fuel pressure on the line.

Jan 29, 2010 | 1996 GMC Yukon

1 Answer

I need to know where and how to change a


the fuel filter is located on the drivers side frame rail near the tranny crossmember your gonna need a fuel line disconnect tool which you can pick up at your local advance auto,you insert the tool in each side of the fuel line and push the tool towards the line while holding the fuel line against the tool and pull the fuel line off while your twisting it slighty it may take sum force but it will slide off,once you get the lines off pull out on the body of the filter it will pop out of the bracket,oh before you start remove the metal safety clips on the lines and reinstall them when your done

Jan 18, 2010 | 1996 Ford Explorer

3 Answers

I need to know exactly where the fuel filter for a 2000 Olds Bravada is located and how to install?


located on the inside of frame rail just undr the drivers side doors, you will need i think its 7/8 and 13/16 wrench's, unsrcew the lines from the filter {be sure to look out for fuel draining from the lines and filter} install new filter make sure the flow indicator on the filter points towards the front of the car start the car look for leaks and your done

Oct 03, 2009 | 2000 Oldsmobile Bravada

2 Answers

Fuel filter location on 2005 gmc pickup


Should be on the right side rear frame rail

Sep 15, 2009 | 2004 GMC Sierra

1 Answer

How do i remove mitsi gto gearbox


Remove air intake hoses to throttle body, remove battery tray, remove washer bottle attached to battery tray, remove clutch slave cylinder and compensator from the top of the tranny. Remove tranny gearchange control cables and hang up to one side.
Jack car up as high as you can and remove the wheels. DRAIN the gearbox (24mm not on bottom side).
Now go under the car and remove the starter motor, remove the exhaust front pipe (can unbolt from front CATs and let hang down), remove frame member and remove the plastic covers from the passenger side wheel well to get to the frame member. Remove the lower control arm bolts on both sides and let the control arms hang down. Disconnects both sway bars at the wheel hubs to allow the drive shafts to be pulled outwards. ease the drive shaft on passenger side out with pry bar and have someone pull on the hub to pop the drive shaft out. On the drivers side, you have to first remove the intermediate bracket on the block and then do the same thing with the drive shaft to pull it out.
Support the tranny with a jack.Remove the four bolts holding the tranny support bracket (covered with four grommets in passenger wheel well). Remove the three bolts from the top of the tranny and remove the bracket.

Now work your way around the tranny and remove the bolts holding it to the engine (there is a 10mm phillips screw/bolt holding a dirt sheild in place under the rear of the tranny, the other bolts are more obvious).

Tranny is now ready to be lowered to the floor using the floor jack.

Installation is the reverse of the above. Good Luck.

Apr 19, 2009 | Mitsubishi 3000GT Cars & Trucks

1 Answer

Power steering and brake line location2002 Chevy Silverado 2500HD


the power steering lines are very short hoses approximately 8 inches long that go from the power steering pump down to the steering box, which is located on the frame, just below the pump. The brake lines run from the master cylinder(where you fill it with fluid on the drivers side firewall) down to the frame, and then follow the frame both directions; both to the front end and the rear end, along the drivers side frame rail, just on the inside of it. The fuel line runs along the same path to the rear.

Mar 03, 2009 | 2002 Chevrolet Silverado 2500HD

Not finding what you are looking for?
1998 GMC Jimmy Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...