Question about 1996 Chevrolet Cavalier

1 Answer

Engine module How can I program the engine control module on a 1996 chevrolet cavalier with 2.2 L?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Get a programmer look on e-bay for it

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy 2004 cavalier ignition control module


on top of the engine mount whit coil pack

Oct 21, 2014 | 2004 Chevrolet Cavalier

1 Answer

How to override the speed governor in a 1996 Chevy cavalier


that will take some software and knowledge of the engine control module... I.E. not happening

Sep 15, 2014 | 1996 Chevrolet Cavalier

1 Answer

Engine diagram for 1996 chevrolet cavalier 2.4L


Engine diagram for 1996 chevrolet cavalier 2.4L. This is a sample for an 1996 2.4L engine schematic...


17659160-gixnvmegknfegt3ailar3alb-1-0.gif

Apr 13, 2013 | 1996 Chevrolet Cavalier

1 Answer

How do i get the check engine light to go off on my 96 chevy cavalier?


Hello
When the service engine soon light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.

Sep 26, 2012 | 1996 Chevrolet Cavalier

1 Answer

Engine torque specs for 1996 chevy cavalier 2.2l


For 1996 Chevrolet Cavalier 2.2L SFI OHV 4cyl the check the next Head Bolt Torque sequence...

------------ front | 8 4 1 5 9 | of | | engine | 7 3 2 6 10 | ------------

Step 1: torque long bolts 8,4,1,5, & 9 to 46 Ft/Lbs torque short bolts 7,3,2,6, & 10 to 43 Ft/Lbs
Step 2: torque all bolts an additional 90 degrees Recheck final torque in sequence

*** CAUTION *** engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque.

Hope helps (remnember rated this).

Jul 15, 2010 | 1996 Chevrolet Cavalier

2 Answers

Cavalier 1996 2.4 motor, change plugs, new coils, control module test OK Misfires will not stay running. Engine light will blink when running. Will not run well enough to drive. Has been avery good runner,...


one of the injectors could be the problem. if the check engine blinks in a continuous mode the fault will have to be pulled from the module, but if it blinks in different series Example: 2 times and then 4 times, it's giving a fault code of 24. A long pause between blinks is a new code or repeat of the same code. these will have to be referenced with a manual, which auto zone could help you with. You can go to the auto zone, advance auto web site and it will help you to narrow the problem down.

Apr 04, 2010 | 1996 Chevrolet Cavalier

1 Answer

Same damn thing...


To help cut cost of replacing everything I suggest getting a scanner on the car to find the PC problem.

Jun 19, 2009 | 1996 Chevrolet Cavalier

2 Answers

I have a 96 cavalier with a 2.4 twin cam engine. Can I replace engine with a 2.2 engine


Yes you can if you also change the ECM for a 2.2 liter engine.
The ECM for the 2.4 liter engine have different programing then the 2.2 liter.
Good luck and hope this helps. 
ECM stands for "Engine Control Module" and is the generic term for the computer that controls engine functions. On some models, this same computer also controls the transmission, and is referred to as the "PCM" or "Powertrain Control Module". 

May 07, 2009 | 1996 Chevrolet Cavalier

2 Answers

Cruise Control problems on a 1996 Chevy Cavalier


on the 1996 cavaliers the cruise is an electric module. the problem you are having sounds like the cable coming out of the module needs to be adjusted.

Mar 16, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1996 Chevrolet Cavalier Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...