Question about 2002 Dodge Ram Maxi

1 Answer

Power steering pump 1500 3.9 p/u

How do you remove the pully off the power steering pump on a 2000 Dodge 1500 3.9?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

You'll need a power steering pulley puller available from many different tool manufacturers.

Posted on Oct 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screaming noise coming from motor gets louder as rpm changes gears sounds like something screaming


if not alternator ,power steer pump,air con ,water pump \
serp belt tensioner or idle pullys

check crank pully is not running out of true

could be serp belt squeal
replace the serp belt

2004-dodge-ram-1500-slt-4.7l-rlvjad5rfjfbkkiwkdzzrtel-1-0.jpg

Mar 11, 2017 | Cars & Trucks

1 Answer

Ram 1500 power steering


Make sure the serpentine belt is tight. If it is you may have gotten a bad pump

Apr 02, 2014 | 2000 Dodge Ram 1500 Truck

1 Answer

How do i remove the power steering pump pulley off 2002 pontiac grand prix gt


can rent or buy a power steering pully puller from the parts store it has instructions on how to use and then remove it is also used to install the pully

May 19, 2012 | 2000 Pontiac Grand Prix

1 Answer

Power steering pump pully on 01 dodge ram


You will need a power steering pump pulley puller. Check with your local parts store to see if they rent or sell one.

Jan 08, 2012 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Belt problem after replacing power steering pump and pully 98ram


If the tensioner can be moved by hand the lock down bolt is not doing its job. Try to tighten the bolt with the belt pulled tight and then release. If the belt loosens the bolt is not working as it should. Make sure theres a lock washer (split lock washer) between the bolt head and the post.

Dec 22, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

How do i take out a power steering pump


there is a bolt behind the pump that needs to be taken out you can't see it and you don't know it's there till you try pulling it out, on some units you have to remove the pully to get to the bolt, I think it's a 17MM or 15MM not sure.

May 30, 2009 | 2000 Dodge Caravan

1 Answer

Need to get this fixed remove water pump pully on 99' dodge 5.9 liter


You will need a special holding wrench made by "LISLE TOOLS" or "OTC", most tools stores stock it
its fairly cheap, looks like a long thin como wrench, and might com in two pcs, one for fan clutch.
good luck

May 20, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Power steering pully broken


try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Mar 20, 2009 | 2000 Dodge Grand Caravan

1 Answer

Surpentine belt.


depends on which v8 you have....the 4.7 the routing is as follows it goes under the waterpump pully over the alternator down and around the power steering pumpto the crank...it goes under the bottom of the crank to the idler pully.the flat side of the belt goes ver the idler then around the automatic tensioner to the ac compressor.
on the 5.2 and 5.9 it routes starting at the idler pully the flat side goes undr the idler the up to the ac compressor around the compressor and down to the power steering pump ... around power stering pump to waterpump where the flat side is against waterpump pully around water pump down and around crank up it automatic tensioner....around tensioner and up and over alternator

Nov 30, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
2002 Dodge Ram Maxi Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...