Question about 1997 Chevrolet Suburban

1 Answer

1997 suburban my headlights hazards turn signals and brake lights do not work and my brights do and my fuses are good please advise

Posted by on

  • thecarpetguy Dec 03, 2008

    My headlights work but my turn signal , brake lights and emergency flashers dont work

  • Anonymous Dec 10, 2008

    The truck came in with no fuel pressure and had power to fuel pump, so i installed fuel pump and then two days later came back not running. Fuel pressure was at zero still had power to pump replaced agian. Still keeps happening agian and agian. What do you think is wrong?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

Get your test light and start in the fuse bos and start tracing your power wires its possible you have a burned out fuseable link.
later paul

Posted on Oct 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

!997 Ford Thuderbird brake lights and hazards do not work


Lets start at the beginning.
The turn signals and brake lights use different fuses but both go thru the turn signal switch and use the same bulbs.
Have you checked the fuses for each circuit and does each switch have power in and out ?

Feb 03, 2013 | 1997 Ford Thunderbird LX

1 Answer

No Tail lights. Or brake lights(when the headlights are on). HELP!!!


I think you have a bad ground at the back on both rear lights or their earth out on the same connection but these american cars use a funny system where the stop lights are the indicators and not a seperate yellow light like europeon motors ,Now these brake light switches also allow the indicators to work by shutting off the feed to the stop light so it flashes with indicators ,Why american cars use this system i dont know as its so complicated for the stop light switch function but try the ground or earth wire on the back lights and if no joy then ask a american mechanic with experiance of this sort of circuitry as when i get american cars for import i have to fit new back lights and disconnect the brake light switch .

Feb 17, 2012 | Cars & Trucks

1 Answer

1997 olds cutless brake lights will not work. bulbs, fuse and switch are good


Its a faulty turn signal switch.Try this,push down and hold brake pedal while pushing on the hazard switch and if the brake lights come on then replace the signal switch.

Jan 29, 2012 | 1997 Oldsmobile Cutlass Supreme

1 Answer

No turn signals,brake lights. have tails lights. all fuses in fuse box under check out ok


The turn signals and the brake lights go through the hazard switch. Try cycling it a few times and see if that solves the problem. If the fuses are good and the 4way's don't work, I would suspect that switch.

Sep 21, 2011 | 1994 GMC Suburban

1 Answer

Problem with my 97 Chevrolet S10 Blazer


I'd look into the multifunction switch. That controles both hazard and turn.

Dec 12, 2009 | 1997 Chevrolet Blazer

2 Answers

1997 Suburban. Turned on headlights and truck completely died


under the hood there is a fuse box with a 50 amp fuse in it this may need to be replaced

Nov 14, 2009 | 1997 Chevrolet Suburban

Not finding what you are looking for?
1997 Chevrolet Suburban Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...