HOW LONG DOES IT TAKE TO CHANGE THE STARTER?
SOURCE: '04 GMC Yukon Denali Check Engine Light
Did u put in fuel shortly before the light came on? I own 2 service centers & the most common situation with "Check Engine" lights are because the fuel cap wasn't re-installed or not tightened. When you refuel make sure it "clicks" when putting back on. We don't charge for a "Code Reading" but a dealer will, don't go there. Go, like the others suggested. If it is the fuel cap & you re-install it correctly, the light will go off after a short drive. Good Luck. PS-Don't panic when the "Check Engine" light comes on unless it blinks, if that happens don't drive. PSS-RE: Murray's, Auto-Zone.......If it's a "Code" (the reader will give a #) the code book will tell you the problem. PSSS-Some1 please have Troy W's Mommy & Daddy take away his keyboard. Just because you can put together a "Lego" car doesn't make you a master mechanic. You only repeated what we said except you have a "Napoleon" complex against any1 plugging something in to a vehicle. It's the same as plugging in a light @ home. In conjunction with "kinder" nine out of ten time in my experience it usually is the oxygen sensor(s) which would be about right with the year model
SOURCE: location of fuse box/panel for 2004 yukon denali xl
The fuse for the cig lighter is in the fuse panel under the hood on the drivers side. it is marked "cig ltr".
SOURCE: 2005 gmc yukon xl denali service ride control
it has to do with your air ride suspension best bet is take it to the dealer there is probably a problem with a level sensor. hope this helps you
SOURCE: Heated seats won't stay on in 2004 GMC Yukon Denali
There is a widespread problem with electrical shorts with the seat warmers. I bought the extended warranty through CarMax and theyy fixed it. Retail repair cost on that would have been $900+. It may be covered by GMC via a recall, but only if you raise enough hell.
SOURCE: gmc yukon has the abs & parking brake light
you have to fix the problem with ur brakes- first check the wiring ,connectors and connection clips to the abs sensors and modulator if looks ok than have truck scanned some auto stores such as auto zone / advanced auto do it for free the code will give u a start point towards fixing ur problem--visual inspection of brakes doesnt always show problem
228 views
Usually answered in minutes!
×