Question about 1994 Ford F150 Styleside Supercab

1 Answer

Instructions on replacing headlight assembly

Instruction on replacing passenger headlight assembly

Posted by on

  • c r
    c r Nov 26, 2008

    the assembly is held on with two 11mm nuts on the bottom (inside two cutouts in the frame) and two phillips screws on the top. you may need to remove the battery (passenger side) and the supporting parts for it. if driver side, the water/washer fluid canister has to be removed (or at least lifted out of the way). this is what was explained to me by a ford tech yesterday so i could change a light buld on the bottom of the assembly. it isn't as easy as it was explained!!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

96 f150 procedure

Headlamp Assembly Removal

  1. Remove radiator air deflector from radiator support.
  1. Remove two screws and two nuts retaining headlamp door (13064).
  1. Pull headlamp door from vehicle. Remove three bulbs and sockets.
  1. Disconnect engine control sensor wiring (12A581) from headlamp bulb (13007).
  1. Remove two retainers attaching upper two attachments of headlamp (13008).
  1. Turn horizontal headlamp adjusting screw (13032) completely out of the adjusting nut.
  1. Pull headlamp from vehicle.

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fit a side front off side bulb in my 2002 ford escort van diesel 55


Instructions
  1. Make sure the the headlight switch is in the off position.
  2. Open the bonnet to the Escort.
  3. Locate the back side of the headlight assembly to the headlight that needs to be changed (driver's side or passenger side) from inside the front the engine compartment.
  4. Unplug the wires from the back of the bulb.
  5. Turn the back of the bulb housing counterclockwise one-third of a turn until the bulb and wire harness are released from the headlight assembly.
  6. Unplug the wire harness from the bulb socket.
  7. If using Halogen headlight replacement and be careful not to touch the glass bulb part. Handle it by the socket at the bottom of the headlight.
  8. Plug the wire harness into the new headlight replacement.
  9. Align the tabs on the headlight housing to the slots in the headlight assembly and insert the bulb into the assembly. Twist the headlight one-third of a turn clockwise until it locks into place.

Dec 03, 2014 | Ford Cars & Trucks

1 Answer

How do I replace the headlight assembly MN133516


The 2003 Outlander utilizes replaceable (9007) headlight bulbs. If you're looking to replace the bulb(s);
1. Raise the hood.
2. Remove the plastic cover at the rear of the headlamp assembly by rotating it counterclockwise, and pulling it off. This will allow access to the headlight bulb.
3. Twist the bulb socket counterclockwise in order to remove it from the headlamp assembly. Pull the old bulb out of the socket, and use a clean cloth to install the replacement bulb. Do not touch the glass of the new bulb.
4. Place the socket back into the assembly, and twist it clockwise. Reattach the plastic cover, and close the hood.
Are you needing DIY instructions for replacing the entire headlamp assembly? Left (driver) or Right (passenger)?

Jan 18, 2013 | 2003 Mitsubishi Outlander

1 Answer

Removing low beam bulb on 05 subaruoutback


Whether they become damaged in an accident or simply burn out over time, your Subaru Outback's headlights may eventually need to be replaced. Fortunately, once you've purchased the right replacement bulb for your model year, performing the repair yourself is relatively easy. These instructions only apply to Outback models made after 2000.

  1. Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment (driver's side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Turn the bulb cover counterclockwise and remove it from the assembly.

  4. 4

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  5. 5

    Pull the old bulb directly out of the socket and replace it with the new one. Press the retaining spring back into place and reattach the electrical connector.

  6. 6

    Replace the bulb cover, and then turn on the engine. Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

    Replacing the High-Beam Bulbs
  1. 1

    Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment ( drivers side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  4. 4

    Turn the headlight bulb counterclockwise and pull it out of the socket.

  5. 5

    Reinstall the new bulb, replace the retaining spring and reconnect the electrical connector.

  6. 6

    Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

Sep 14, 2012 | Cars & Trucks

1 Answer

I need to remove old broken passenger side headlight assembly and install new assembly in my 2004 Chevy Colorado crew cab. I need step by step instructions on how to do this myself.


I am not sure about the Colorado, but most vehicles about that age have a plastic clip. If you open the hood it is near the back of the headlight area and pulls straight up. You should be able to take these two clips off and the headlight will go straight forward, you can then twist the bulb holders out of the headlight assembly. Reverse procedure to install. Please rate my answer so I an awarded points for it.

Jan 29, 2012 | Chevrolet Colorado Cars & Trucks

1 Answer

I need to replace the headlight assembly on a 1999


I just popped one of mine off this evening looking for the fan relay. 10mm socket. One bolt at the top, 3 nuts behind each lamp. You may need to take the air intake out to get access to the nuts on the drivers side. That is another 3 10mm bolts, 2 of which you need to take out to get to the air filter anyway.

Oct 30, 2009 | 1999 Chrysler Town & Country

2 Answers

How to replace passenger side headlight assembly on 2001 BMW 325i


The E46 2001 325i headlight assembly is held down by 4 bolts. Question is where they are and how to get to them. The 4 bolts require a 10mm wrench.

There are two bolts on top of the headlight assembly. And two more near the back of the assembly, near the area where you would change a headlight bulb.

There is just one more trick to this. Please refer to this trim: http://e46fanatics.com/howto/howtodetail.php?howto_id=24

This trim hooks on to the side fender, just under the turn signal. You have to unhook this.

Then the entire headlight assembly (including the turn signal) can be slided out together.

Apr 11, 2009 | 2001 BMW 325

1 Answer

2003 Mercury Sable headlight bulb replacement


This problem is now resolved, thanks to a prior post by sableowner.

http://www.fixya.com/cars/t1479995-2001_merc_sable_headlight_replacement

The 2003 Sable has the same headlight assembly and removal/replacement instructions as the 2001 Sable. Once I had this information in hand, bulb replacement was easy.

Jan 10, 2009 | 2003 Mercury Sable

1 Answer

How do I replace the headlight in my 2005 mitsubishi lancer


Hi. While looking into your question I came across another posting of the same question for a 2004 Mitsubishi Endeavor and I believe it could help you. I put it in a link below. The instruction are basically the same. I hope this helps. Let me know if I can be of anymore assistance.

2004 Mitsubishi Endeavor Headlight Replacement

Nov 28, 2008 | 2004 Mitsubishi Endeavor

1 Answer

Headlight replacement instructions


Release the hood latch inside the Rodeo. Raise the hood and look down behind the headlights. The old bulb and assembly are held into the headlight from the back side of the the headlight. There is not a great deal of room to work behind the headlight because of the battery on the passenger's side and the air cleaner box on the driver's side.

Grip the large round plastic nut with your hands and give it a quarter turn counter-clockwise. Carefully remove the head light and plastic nut. Look for the release lever to depress and pull on the old bulb at the same time. It will unplug very much like your computer power cord. Be careful not to drop the plastic nut.

Now plug in the new bulb and replace the plastic nut. Carefully insert the bulb into the headlight and give the plastic nut a clockwise quarter turn and try the new light.

I just replaced both of my headlights last night and I am an accountant.

Good luck!

Oct 20, 2008 | 1999 Isuzu Rodeo

Not finding what you are looking for?
1994 Ford F150 Styleside Supercab Logo

Related Topics:

686 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...