Question about 1998 Mitsubishi 3000GT

1 Answer

Mass air flow sensor

I need to know what wire is the air intake temperature sensor wire in the mass air flow sensor in my 1993 mitsubishi 3000gt. would you happen to know? thanks

Posted by on

  • Anonymous Mar 28, 2014

    I changed the IACV but still high I don't know what to do I even changed the mass air flow sensor

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Mitsubishi Master
  • 329 Answers

<SOHC, Federal - Non Turbo,Canada - Non Turbo>

mass air flow sensor - 1d0cd9b.jpg ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------=====================================================================================================================================

<California - DOHC Non Turbo, Turbo>


c4dfca0.jpg

Posted on Oct 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1993 Mitsubishi 3000gt when mass air flow sensor is plugged in car wont rev past 2500 rpm car was bought with it unplugged. Replaced the mass air flow sensor an still does it. When its unplugged it runs...


The computer only knows the voltage across what it thinks is the MAS. A bad wiring connector and a bad MAS is all the same to the computer. I would change the harness to the MAS before I spent any time or money on any other problem solving.

Mar 19, 2015 | Mitsubishi 3000GT Cars & Trucks

1 Answer

91 mitsubishi 3000gt seems to idle ok, but has no power and will not go faster than 40mph.


sounds like you may have a plugged up exhaust or catalytic converter. Try removing the o2 sensors from exhaust pipes and see if it runs better. If it was a timing issue it would idle bad.

Jan 15, 2014 | 1991 Mitsubishi 3000GT

1 Answer

95 Mitsubishi 3000gt dies when at idle


Could be a wiring problem or a leak in the hose to the sensor.
Does the reading change if you increase the RPM ?

Sep 13, 2012 | 1995 Mitsubishi Eclipse

1 Answer

Check engine lght on and 2 codes p0103 and p0112


P0103 HYUNDAI - Mass or Volume Air Flow Circuit High InputPossible causes- Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks
- Faulty mass air flow sensor
Tech notesBefore replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.
P0112 HYUNDAI - Intake Air Temperature Sensor 1 Circuit Low InputPossible causes- Dirty air filter
- Intake air temperature (IAT) sensor harness is open or shorted
- Intake air temperature (IAT) sensor electrical circuit poor connection
- Faulty intake air temperature sensor
When is the code detected?An excessively low voltage from the sensor is sent to ECM.

Jun 08, 2012 | 2001 Hyundai Accent

1 Answer

What causes the engine is at normal operating temperature idle roughly and die?


I would check the mass air flow sensor that is located on the air intake (its the box in line on the air intake with wires going into it) with the engine running take a screw driver and smack the mass air flow sensor with the handle... if the engine stalls or starts running real rough that might be the culprit.

Feb 26, 2011 | 1993 Buick Regal

1 Answer

Mitsubishi 1994 3000GT idles rough when u try to push the gas petal it dies


I'd try cleaning the mass air flow sensor and check its connections too. Also if you have the car checked for any engine codes this may assit. You may have a heavy vacuum leak too... As for now I'd check the MAF
This is located on the air intake just after the air filter.
I hope this may have helped,
Tom

Oct 11, 2009 | 1994 Mitsubishi 3000GT

1 Answer

What color is the intale air temp sensor wire on a 2002 Mitsubishi Eclipse GT, 3.0L V6, 5spd manual?


There are two wires for the intake air temperature sensor.

The sensor is built into the Mass Air Flow sensor near your air filter.

Pins 5 and 6 (wire colors brown and red/blue respectively) of the MAF connector are for the air temp sensor; Pin 6 is the 5V reference voltage from the ecu, pin 5 is the return signal (ecu input).

Sep 09, 2009 | 2002 Mitsubishi Eclipse

1 Answer

Sensor locations


air intake look at snorkel it could be part of mass air flow check intake for eng coolant

Aug 29, 2009 | 2003 Ford F150 Regular Cab

1 Answer

Iat sensor


Yes and No , It does, however it is integrated into the Mass Airflow Sensor . So its not per say a separate component that you can replace without replacing the MAF unit .Excuse me , Mitsubishi wants to call it the "Volume Air Flow Sensor" , not Mas Airflow Sensor , as we know it . . I stand corrected .

Jan 08, 2009 | 1995 Mitsubishi 3000GT

2 Answers

Looking to findthe mass air flow sensor on a 89 chevy corsica


hi the mass air flow sensor is in the intake hose/tube between the air filter and intake closer to the intake manifold will have wires pluged into the side of it

Dec 10, 2008 | 1993 Chevrolet Corsica

Not finding what you are looking for?
1998 Mitsubishi 3000GT Logo

Related Topics:

510 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...