Question about 1992 Chevrolet S-10 Blazer

2 Answers

Digital dash on 1992 blazer is not working?!?

I have a 92 blazer with a digital dash. The dash is completely black as in no gage works i pulled it out didnt see ne burns on it.It worked wen i parked it then i didnt drive it for 3 days and now it doesnt work ne advise?

Posted by on

  • 3 more comments 
  • Anonymous Dec 26, 2008

    dash is out black is it a fuse

  • champion8822 Dec 26, 2008

    i have same problem

  • champion8822 Dec 26, 2008

    doe any bodie know

  • robert stauffer
    robert stauffer Apr 02, 2014

    i have the same prob i have a 92 blazer and the speed odomiter donsnt light up but the rest of the dash does any advice

  • robert stauffer
    robert stauffer Apr 02, 2014

    i have the same prob except my speed gauge dont light up the rest of the dash does but that

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Pull the dash cluster out break it down find the green board there is a little square board on it about 2x2 raised off the green boar. Get a solder sucker and desolder it. Pry that square off take get your solder iron hot take roson-core solder and touch it to the iron should make a bead of solder on the end touch it to the existing soulder on the square board until it turns to liquid add more solder do it to all of the solder points replace square an d solder it back in and do the some to all the solder points on the green board reassemble put it back In to the dash. A guy on e bay is charging 100+ to do the same thing that you can do for 20 and be careful not to burn your self and be patient it take a while for the iron to heat up. Good luck!

Posted on Aug 14, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Was told have to pull and replace to a tune of about 850 $

Posted on Dec 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 chevy blazer replaced fuel pump with fuel pick up switch and fues guage still does not work


THERE SHOULD BE 3 WIRES, FROM PUMP/SENDER UNIT, 1 WIRE FOR PUMP POWER, 1 WIRE FOR GROUND, & 1 WIRE FOR FUEL GAGE, THE FUEL GAGE WIRE GOES DIRECTLY TO GAGE , INSPECT THIS WIRE , MAY CHANGE COLOR ON ITS WAY TO GAGE, WIRE MAY HAVE BEEN DAMAGED UNDER TRUCK, ALONG FRAME RAIL, OR HAS BECOME CORRODED, A BUMP IN THE WIRE INSULATION(CORROSION), ALSO, CHECK ALL GROUNDS, REPEAT, ALL GROUNDS TO FUEL PUMP CICUIT, EVEN IF THEY LOOK OK, THEY COULD BE BAD GROUNDS, YOU NEED GOOD GROUNDS TO COMPLETE ANY CIRCUIT !!! 2001 TRUCK, I'D QUESTION YOURS !!!!! WHAT SHAPE WAS YOUR WIRE HARNESS @ PUMP, THEY GO BAD, ANYTHING UNDER THE TRUCK !!!!!! STAY IN YOUCH, LIKE TO KNOW OUTCOME !

Mar 25, 2013 | 2001 Chevrolet Blazer

1 Answer

'92 Nissan hardbody temp gas gage don't work any


Check for the the temp unit on cylinder head. put the wire on cylinder head and check if the gauge is working

May 17, 2012 | 1992 Nissan Pickup

1 Answer

The digital dash is completely dark, have all lights outside the vehicle but no dash lights


Make sure the panel light dimmer switch isn't turned way down on the headlight switch. If that's OK the dash will have to be replaced or sent in for repair.

Apr 10, 2011 | 1992 Chevrolet S-10 Blazer

1 Answer

92 Jimmy digital dash has gone black


You need to get a new dash.The back lighting has died and needs to be replaced.I had the same year,make and model with the same problem and thats what it took to fix it.

Feb 11, 2010 | 1992 GMC Jimmy

1 Answer

Fuel gage is not working along with odometer checked for fuses did not find took apart dash found nothing there what should i check next. Tempature gage and oil pressure gage still work fuel gage is right...


when you pulled the top of the dash off did you check the cable connection to the insturment cluster. i had a similar problem where my gauges died individually including the spedo and tach. slapping the dash usually would cause the gauges to start working again, but that quit also and i had to tear the cluster out and check the conneciton. that fixed the problem.

Oct 26, 2009 | 1992 Saturn SL2

2 Answers

My 1992 s-10 blazer head lights work but the digital dash will dim with either the parking or headlights on when they are off the dash works fine, have replaced the dash itself and checked the switch and...


You Digital dash is working as it should, it is supposed to dim with the lights on so your eyes don't have to adjust, from looking ahead to checking speed and back

Jul 08, 2009 | 1992 Chevrolet S-10 Blazer

1 Answer

Odometor stop working on 92 Saturn SL1


Take out your gages under the dash and send them out to get fixed they are speed operated. What most likely happend is the dial in back the odometer is stripped.

Mar 23, 2009 | 1992 Saturn SL

1 Answer

Olds bravada 92


if it is the all digital dash. you have to replace, or have it replaced. not real hard to do. i used one from a salvage yard.

Jul 31, 2008 | 1992 Oldsmobile Bravada

1 Answer

Gas gauge


I have a 92 Ranger that has the same issue. After doing some online research I felt sure it was a bad fuel level sender. However I installed some new dash light bulbs a couple of months back and the fuel gage started working, if only for a few days. I'm now thinking the connector on the back of the gage assembly is not making good contact on the fuel sender circuit. You might want to try to clean the contacts with an eraser and see if that helps.

Jun 14, 2008 | 1992 Ford Ranger

Not finding what you are looking for?
1992 Chevrolet S-10 Blazer Logo

Related Topics:

580 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...