Question about 2003 Ford Focus

1 Answer

Damaged facia on strut between doors on ford focus

The black facing between the doors on my ford focus, is dented .I want to replace it.

Posted by on

  • ty010d1046 Oct 25, 2008

    Hi Team, I want a price as well as an out-let in the Dundee area, so I can replace the damaged part. Any adviiiice on removing it and refitting the new part would be very welcome also,

    Kind regards ,team, Tom Young. (ty010d1046)

  • Curt Downs May 11, 2010

    do u need to know where to purchase it or how to remove/replace it?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Ford Master
  • 1,779 Answers

The Dundee area? As in Crocodile Dundee, Australia? The source I was going to refer u to was : I believe what u r looking for would be under (after u enter focus year, etc.) 'door' then click on exterior trim, then 'body side molding' Click on the eyeball to see what parts look like, what I found is directly after the front door glass , and at the same level. For some reason dr. side is $42, pass side is $33, there is also a clip (not shown for $2) that must hold it in place. Sorry I don't know the procedure to remove it ,but maybe if u see the clip u can determine how it's held on. U should be able to order this at any ford dealer, the site above has good prices, but u better check shipping cost, especially if u r down under. Let me know if this isn't what u r looking for. Good Luck!

Posted on Oct 25, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Ford focus computer box part no. 7U71- 12A - 650 - EA. Nothing available at the local scrap yards,,,

What year is your focus ? Replacing a PCM - engine computer ,it will need to go to the dealer for programming ! You can't just replace a module from one vehicle to an other without programming PATS keys , VIN # an some other thing's it won't start !

Aug 21, 2016 | Ford Cars & Trucks

2 Answers

How do I replace the rear struts?

Are we talking rear strut assembly with spring there 3 bolts on top in side trunk under carpet befor changing leave tires on unbolt struts raise car up bust lugs lose befor raing car . The reason for tires left on if u unbolt strut and spring decides to pop loose your legs and face are protected tire will save u safty if first

Nov 28, 2014 | 2000 Ford Focus

2 Answers

How do you replace shocks on a 2005 ford focus

the focus has struts, no shocks, use need special tools to replace struts

Oct 27, 2010 | 2005 Ford Focus

1 Answer

How do i replace the gas tailgate struts on my 06 ford focus

they a little clips on the strut be sure to get a broom are some long stick to help hold the lift gate up give these websites a try and wish you the best of luck Michigan Man.

Mar 05, 2010 | 2006 Ford Focus

1 Answer

Why is my focus acting up? Even though the driver door is closed, the indicator alarms. Sometimes the wiper comes on by it self and such crazy stuff.

On the door latch attached to the car body, the switch for the alarm is right behind the hook that the door locks on to. It should be covered in black rubber. While the key is in the car, press this switch in, wiggle it around, and see if it stops "alarming". It's possible this switch has been damaged and needs replacement.

Feb 08, 2010 | 2000 Ford Focus

1 Answer

Is the black shrowd on 08 fo cus door mirror

Most of the time you can replace just the mirror housing for cheap if you can reuse the mirror. As for as just the black shroud i would recommend checking out they have a very wide selection of just about everything needed to rebuild a damaged vehicle. If you cannot find one there i would recommend a reputable salvage yard.

Feb 03, 2010 | 2005 Ford Focus

2 Answers

Doeds a 1997 ford explorer have front shocks or struts?

My 1997 Ford Explorer AWD has shocks in the front.

Also, if yours has shocks, be certain you get replacement shocks for AWD/4WD and not 2WD versions. They are not the same; the 2WD shocks have a longer body/shorter rod that will rub on the drive shaft--at least until they are sufficient bent/dented to clear the shaft (at which time they may not be working so well any longer, having leaked...) ;-)

Jan 11, 2010 | 1997 Ford Explorer AWD

1 Answer

2002 ford focus se. need to change the front struts (at least the passenger side).

I highly urge you to take the car to a repair facility. Replacing struts is very dangerous especially when removing the coil spring from the strut. Without the proper tools you or someone close can be seriously hurt. If you must replace them yourself than go with what is known as a ready strut. It is a complete assembly. New strut, spring, strur bearing, and strut boot preassembled. They are more money but worth it to avoid getting hurt.

Jul 11, 2009 | 2002 Ford SVT Focus

Not finding what you are looking for?
2003 Ford Focus Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers


Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides