- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P0132 FORD - O2 Sensor Circuit High Voltage Bank 1 Sensor 1Possible causes- Front Heated Oxygen Sensor Bank 1 harness is open or shorted - Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection - Faulty Front Heated Oxygen Sensor Bank 1 - Inappropriate fuel pressure - Faulty fuel injectors - Intake air leaks may be faulty - Exhaust gas leaks
An Oxygen Sensor (O
S) or heated Oxygen Sensor (HO
S) is used on all engines. The sensor is mounted in the right
side exhaust manifold on some V8 engines, while other V8 engines use a
sensor in both right and left manifolds.
Heated oxygen sensors are located in the exhaust pipes below the exhaust
manifolds. The sensors react with the oxygen in the exhaust gasses and
generates a voltage based on this reaction. A low voltage indicates too
much oxygen or a lean condition. Where as a high voltage indicates not
enough oxygen or a rich condition.
Disconnect the Oxygen Sensor (O
S). Measure resistance between PWR and GND (heater)
terminals of the sensor. If the reading is about 6 ohms at 68°F (20°C).
the sensor's heater element is okay.
Hope this helps (remember to rating this free answer).
The oxygen sensor (there should only be one on your engine) is mounted under hood, passenger side, lower engine area, above exhaust pipe flange, and is mounted in the exhaust manifold. Hope this helped and best wishes.