Question about 1997 Buick LeSabre
Are you talking about the housing or the bulbs? Bulbs can be replaced by removing the two ten mm horizontally mounted bolts that hold the housing in. These are located towards the center of the car on each side and should be right above and below each other. Once these have been removed, firmly, but gently pull the housing slightly out at the mounting bolt site and then straight back towards you. The wraparound section of the housing is help in place by an off-set clip that locks inside the fender. Care should be taken not to bend it, for if broken the whole housing will need to be replace and these still fetch abround a 100$ a piece at scrap yards. Find the bulb that needs replacing and turn the fitting, (wires and all) in a counter-clockwise motion. It should turn firmly, but easily and it should pull straight back out from the housing. Then remove the two pronged clip from the headlight insert and replace with the appropriate bulb. If using LG's (OEM) I believe the part number is 9600 for standard halogens. Reverse to install. Good Luck, hope this helps.
Posted on Oct 17, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 27, 2014 | 1997 Buick LeSabre
Dec 10, 2010 | 2000 Buick LeSabre
Jun 03, 2010 | 1997 Buick LeSabre
Dec 11, 2009 | 2001 Buick LeSabre
Jul 15, 2009 | 1997 Buick LeSabre
Jun 26, 2009 | 1997 Buick LeSabre
Jun 16, 2009 | 1997 Buick LeSabre
Jan 10, 2009 | 1997 Buick LeSabre
Jan 09, 2009 | 1997 Buick LeSabre
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: