Question about 2004 Pontiac Sunfire

2 Answers

The turn signal will stop flashing and just hold the signal lighted. Is this a car computer issue or can it be fixed by replacing a fuse?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers

Hey there AMF629,

If the signal comes on at all it's not a fuse.

If it happens on both left and right turn signals, then its the 'Flasher' module. It's usually a small cylindrical shaped module (could be metal or plastic) located under the dash, usually plugged into the fuse box.

If it's only the left or the right, turn on the hazards. Check that all the external lights come on. One is likely out or dim. It needs to be replaced.

The good news is the fixes for this type of problem should cost less than $5.00.

Comment me back if you continue to have problems.

Mike

Posted on Oct 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine flashes twice as quick upon the left indicaor, and left rear lights are out, is it a bulb, or wiring harnish issue?

Posted on Nov 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 Chevy Silverado 1500 Extended Cab 4x4. My question is that when the truck is parked & not running with no keys in the ignition , my brake lights will begin to flash on & off until it drains...


Stop lamp circuit discription

Stop Lamps
The STOP LP 25-amp fuse in the underhood fuse block supplies battery positive voltage to the normally open stop lamp switch. When the driver presses the brake pedal, the switch contacts close and battery positive voltage is supplied to both the STOP 15-amp fuse and the center high mounted stop lamp (CHMSL) 10-amp fuse in the instrument panel (I/P) fuse block, and to the turn signal/hazard module. The turn signal/hazard module then supplies voltage to both of the trailer rear turn/stop lamp supply voltage circuits. The voltage from the CHMSL 10-amp fuse is to the CHMSL and the trailer jumper harness. The voltage from the STOP 15-amp fuse is to the stop lamps, throttle actuator control (TAC) module, and the cruise control.

I think The turn signal/hazard module has something to do with the lights flashing .From looking at a wiring diagram B+ voltage from the STOP LP fuse 25amp in the under hood fuse box supply's the brake light switch , from there it feeds B+ to VEH STOP fuse 15amp and VEH CHMSL fuse 10amp an to stop lamp switch signal to the turn signal flasher module which is suppose to control the trailer stop lights . Do you have a connection for a trailer hook up ?
Remove both LT an RT TRLR fuse's both 10 amp from the I/P fuse block an see if the problem goes away .

Do you tow a trailer ? Check the trailer connector for corrosion !

May 15, 2017 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

Both my turn signals stop working, no flashing, no sound, nothing. How can I fix this problem?


First check the fuse for the signal lights to see if its blown.If the fuse is good then and look for a signal light relay and they is one then replace it with another one in the fuse panel that has the same part number on it to see if the signals will start working.If the fuse and relay are good then you will need to replace the signal switch.

Aug 17, 2012 | 1999 Dodge Grand Caravan

1 Answer

I have a 1994 cutlass supreme and both the turn signals are flashing when they are engaged. We replaced the turn signal flasher underneath the dash, thinking that it might help and it did not. We also had...


Stop replacing things and turn off your hazard lights. If this doesn't fix you may have to replace your steering column turn signal switch. Youer hazard lights aren't working likely to a blown fuse.

Jun 16, 2011 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

I have a 2002 pontiac aztek. My rear right signal/brake lamp does not work. When i signal left, the front and rear left lights flash normally. When i signal right, the front right light flashes normally...


as for the faster flashing thats as simple as a blown bulb, replace the bulb and see if that fixes the problem, it may fix the lot because the other symptoms you mention are a bad connection, if bulb is fine check the connection isnt loose or corroded over. if it is simply file it back to establish better connectivity,

Jun 22, 2010 | 2002 Pontiac Aztek

2 Answers

1992 Cadillac Brougham 5.0 L V8 RWD, turn signal don't work.


The turn signal switch is most likely the problem,but change the flasher for the turn signals first,some times this is all that it is.

Jun 11, 2010 | 1992 Cadillac Brougham

2 Answers

Turn signals flash sometimes other times they just light up


replace flasher, or switch with emergency flasher to test.. Should be in with fuses or in that area.

Jan 30, 2009 | 2000 Ford Explorer

1 Answer

Turn signals, Hazard lights


I would replace the bar switch assembly.

May 18, 2017 | 1998 Jeep Wrangler

3 Answers

Brake lights, Front Turn Signals not working


Have you checked your relays yet? Many electrical problems with lights can be attributed to bad relays or relay connections.

Aug 07, 2008 | 2002 Ford Explorer Sport Trac

1 Answer

Ford Taurus Signal light failure


i can tell u this the multifuncion switch is in the steering colum signals,highbeam flash to pass and wipers chuck

Jul 09, 2008 | 1998 Ford Taurus

Not finding what you are looking for?
2004 Pontiac Sunfire Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

71288 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7009 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...