Question about 1990 Nissan 300ZX

1 Answer

And if u do find a cylender thats not fireing what next

I pulled off the wires one by one and switched the boots but same cylender was not fireing

Posted by on

  • cgcon Oct 18, 2008

    I will try that thank u for your help so us non car guys can keep going thanks again

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 414 Answers

It sounds as if you either have a faulty spark plug or a faulty high tension lead you need to check the plug and lead on the cylinder that is not firing. If they are OK the only other cause could be a lack of fuel to that cylinder.

Posted on Oct 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 toyota 4runner #2 cylender misfire


You might want to look for a vacuum leak on the intake manifold. You also might need to hook up a scope and measure injector duty cycle and compare it with a good cylinder. Also check wiring for chaffing going to the injectors and coil pack. I can provide you with pin out on ECM if you need.

Oct 21, 2012 | 1998 Toyota 4Runner

2 Answers

CAN I CHANGE MY OWN SPARK PLUG WIRING ON A P7 GRAND AM RATHER SIMPLY?sPARK PLUG WERE CHANGED ALREADY ABOUT A MONTH AGE AND I DIDN'T GET THE WIRES CHANGED.


Yes you can, just make sure you put the wiring in the correct order, the best way to do this is change one wire at a time.

Feb 28, 2011 | 1997 Pontiac Grand Am

2 Answers

Cylender order for spark plug wires


5.0L HO Firing Order: 1-3-7-2-6-5-4-8
4.6L Firing Order: 1-3-7-2-6-5-4-8
3.8L Firing Order: 1-4-2-5-3-6
2.3L Firing Order: 1-3-4-2

If you need a diagram, follwo this link...
http://www.moddedmustangs.com/reference/firing-orders.php

Nov 18, 2009 | 2006 Ford Mustang

1 Answer

Number four cylender is dead as four o clock. checked fire on plugs and wires. they are fine. pulled number four injector, no gas spraying. can i take the injector apart


you could but its not going to work again????
try it out on a different cylender first if it still wont go
just put in a recon injector or a second hand one

Oct 30, 2009 | Alfa Romeo Spider Cars & Trucks

2 Answers

I have a 1996 3.8 dont fire in a couple cylenders


Have you changed the spark plugs/wires? A scan will pull up any codes that can narrow the issue as well.

Oct 28, 2009 | 1996 Dodge Caravan

2 Answers

My car backfires and will not start.


Cmashaft or crank shaft position snesors. Find their location and clean them 1st then re-try.

Aug 04, 2009 | 1995 Chevrolet Monte Carlo

2 Answers

94Metro Has a bad vibration at idle, gets worse in gear stopped


check all motor mounts first. if they are ok then check to make sure all cylenders are firing. try pulling one plug wire off the spark plug and see if the engine changes sound or anything. if it does, put the wire right back on then move to the next one and repete. if you pull one and it does not change then that plug is not firing. could be caused by a crack in the porcelian in the plug or bad plug wire connection or bad wire

Mar 12, 2009 | 1994 Geo Metro

Not finding what you are looking for?
1990 Nissan 300ZX Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...