Clock set time

How to set the clock in a Infiniti g35?
How To Set Your INFINITI's Clock

1. Press the menu button below the lower display.
2. Hit the settings key on the lower display.
3. Locate and hit the "clock" key to adjust "on-screen clock", "daylight savings time", "clock format (24 hr)" and "timezone"

Mar 4, 2019

How To Set Your INFINITI's Clock

https://www.competitioninfiniti.com > Blog
Search for: How to set the clock in a Infiniti g35?

Videos an well

https://www.google.com/search?q=2006+Infiniti+G35+setting+the+analog+clock

..

https://www.nissan.co.il/content/dam/Nissan/israel/services/car-books/Nissan-Xtrail-Car-Book-2016-ENG.pdf

Page 4-5

Clock:
Select the corresponding keys to adjust the settings.
• Time Format:
The time setting can be selected from 12 hour
and 24 hour formats.
• Date Format:
The day, month and year display can be selected
from five formats.
• Clock Mode:
Select the clock mode from Manual, Time Zone
and Auto.
When [Manual] is selected, you can set the clock
mode manually from the [SET CLOCK MANUALLY] screen.
Select [Auto] to automatically maintain the time
using GPS.
• Set Clock Manually:
Mode (AM/PM) (where fitted), Hours, Minutes,
Day, Month and Year can be set manually if
[Manual] is selected in the Clock Mode setting.
• Daylight Savings Time:
Turns the daylight savings time on or off.
• Time Zone:
Select the applicable time zone from the list.

Yes this is a little confusing!! It is set from the Nav window. Depress Nav and scroll down to clock.

Depress clock and you can daylight savings option or set clock

Hope this helps?

Other Jeep Radios
1. Press the MENU hard-key on the right side of the
radio.
2. Then press the System Setup soft-key to get to the
System Setup menu.

Set the Time
1. Press the time soft-key in the lower left corner of the
screen.
The minutes are set by the GPS system.
2. Press the Set Time Zone soft-key to change to the
desired time zone.
3. Press the Daylight Savings soft-key to switch Daylight
Savings on or off.
It is possible to set up your own time (ahead or behind
actual GPS time), by pressing the USER CLOCK soft-key.
NAVIGATION 15

What question

There is 2 different radios. With or without rds. Here are the instructions for both.
Setting the Time for Radios with Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.
To synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the clock button to enter the clock set mode, then press and hold the clock button for three seconds until UPDATED displays. If the time is not available from the station, NO UPDATE displays.
RDS time is broadcast once a minute. After tuning to an RDS broadcast station, it can take a few minutes for the time to update.
Setting the Time for Radios without Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes flash. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.

go to setting and choose clock setting, pushing the button up and down until the correct time, then the clock will turn automatically to match the digital clock you set in the setting.

Make sure the clock is set to the correct time zone before trying to set the time.

check page 3-39

Setting the Time
To set the hour, press the clock button. The clock
symbol will appear on the audio display and the hour
number will flash. Then turn the ADJ knob to increase or
to decrease the hour. To set the minutes, press the
clock button again. The minute numbers will flash.
Then turn the ADJ knob to increase or to decrease
the minutes. The time can be set with the ignition on
or off.
To synchronize the time with an FM station broadcasting
Radio Data System (RDS) information, press and
release the clock button to enter the clock set mode,
then press and hold the clock button for three seconds
until UPDATED appears on the display. If the time
is not available from the station, NO TIME UPDATE will
appear on the display.
RDS time is broadcast once a minute. After tuning to an
RDS broadcast station, it may take a few minutes for
the time to update.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Setting the Clock for Systems with the
Set Button
Press SET. Within five seconds, press and hold the right
SEEK arrow until the correct minute appears on the
display. Press and hold the left SEEK arrow until the
correct hour appears on the display.
Setting the Clock for Systems with HR
and MN Buttons
Press and hold HR until the correct hour appears on the
display. Press and hold MN until the correct minute
appears on the display. To display the clock with the
ignition off, press RECALL or HR/MN and the time
will be displayed for a few seconds. There is an initial
two-second delay before the clock goes into the
time-set mode

Actully, you need to press and HOLD the "mode" button for a few seconds. It will then display the setting for the speed sensative volume. Press the mode button agian and it will switch to "set clock". You can select a 12 hour (standard) or 24 hour (military) clock. You then use the key pad to enter the time and the AM or PM setting .