Question about 1996 Chevrolet Blazer

2 Answers

1996 chevy blazer

The other day i got on the gas and it started to rev up but then the motor stalled and it wont start now i know im getting spark and idk whats wrong with it.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 27 Answers

Remove the vacum line going into the brake booster. If you do not know, its on the firewall on the driverside engine compartment. Once you remove the vacum line spray some strating fluid into the booster and replace the house. If the truck starts then you know for syre the fuel pump is going out.

Posted on Aug 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

You may want to check fuel pressure possibly fuel pump try banging on the gas tank with a mallet while someone tries to start the car if it is a fuel pump you may be able to get it started but pump will still need to be replaced

Posted on Oct 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1997 chevy blazer... fuel pump turns on. have to prime to start it. when starts revs then stalls out


sounds like ur fuel pump is burned out (broken impellor) get a new one.
of course she revs and dies if u pour fuel down the carby...duh.

Nov 21, 2013 | 1997 Chevrolet Blazer

1 Answer

2000 chevy blazer getting spark&gas but want start


check your exhaust piping for any sensors that may have been damaged or unplugged during your manifold gasket job. Usually you can find them between the motor and the muffler, as well as between muffler and back of car.

how are you sure its getting gas?

Mar 06, 2013 | 2000 Chevrolet Blazer

1 Answer

Problem with 1995 chevy blazer


What is the trouble code stored in the computer, and have you checked the idle air control valve ?

Jan 10, 2013 | 1995 Chevrolet Blazer

1 Answer

Im stummped my 1996 chevy s10 ran just fine one day it stalled on the highway its got fuel spark and good commpresion what sencor could be keeping it from starting


First, charge your battery all the way, Is your check engine light on? How did you determine you have spark and fuel? Did you try starting fluid?

Apr 23, 2012 | 2003 Chevrolet S-10

1 Answer

1996 chevy blazer starts and then stops


Its either the fuel pump or the fuel regulator.Fuel pressure sure be 60-66 psi with key on and engine off.

Jan 04, 2012 | 1996 Chevrolet Blazer

1 Answer

1996 chevy blazer truck won't start suspect fuel not getting to spark plugs... replace fuel filter checked relay in the glove box Ok opened steel fuel line at intake and it was pressurized vehicle still...


take nomber one sparke plug out and tape a paper there turn the motor over 3-4 times if the paper is wet then you are getting gas if not it could be an injector try some fuel cleaner in you gas

Feb 23, 2011 | 1996 Chevrolet Blazer

1 Answer

Wont run


Since you reworked the top of the motor, I would look real hard at the timing. Since it almost caught, I am assuming you are now getting spark. If not, look at the fuse for your computor. A fuse can blow just cause it's in the mood and no other reason. Keep in mind, it's either mechanical or electrical. You may have fuel, but is it at the right pressure? Change the filter as a precaution.
Good luck

Feb 09, 2009 | 1988 Chevrolet Blazer

1 Answer

Injectors not working


ok moisture can cause problems with gas and spark. try some dri gas or something first, check the fuel filter. or somekind of timing with the injectors and the ignition switch.

Nov 21, 2008 | 1988 Chevrolet Blazer

2 Answers

Wont run


Try checking those sparks again. It could be a weak spark not enough to start your engine.
Make sure also that you have fresh gasoline, as gasoline or diesel looses it's effectiveness after a long time.

Nov 20, 2008 | 1988 Chevrolet Blazer

1 Answer

1996 Chevy S10 stalls out 3 times before steady start


check for loose or cracked vacuum lines, and/or the rotor. It may not be making consistant contact.

Oct 08, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...