Question about 2000 Oldsmobile Bravada

1 Answer

2000 Olds Bravada ignition

My 2000 olds bravada wont start. I put the key in the ignotion and when i turned it it clicked none of the gagues would come on. Non of the lights will come on nothing electrical will work. The battery is fine full charge, and i even tried to jump it just in case but it didnt work. the steering wheel is unlocked but it will not allow me to take the car out of park. Is this and ignition switch, one of the modules in the fuse box, or something else, where do i start checking.

Posted by on

  • mrraven Oct 30, 2008

    I have exactly the same problem right now .. someone suggested it may be the ignition switch

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Okay .. had the EXACT same problem - word for word .. turns out, that my positive battery cable was corrodid badly.. the ignition switch wasnt getting any power or signal - so it didnt know the trans was in park, so it locked the key in place... and all power cut off obviously because no juice was going thru the cable.
Apparently however.. you will get almost the exact same symptoms if the ignition switch burns out... so first test the battery cables themselves.. if they are fine .. then plan on replacing the ignition switch.

Posted on Oct 31, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 bravada wont start, no noise


check the negative battery cable. If you get nothing at all when you turn the key, it is usually electrical.

Jun 09, 2014 | 2000 Oldsmobile Bravada

1 Answer

My 2000 bravada oldsmobile wont start is it the sartaer


It depends upon what actually happens when you turn the key. If the engine turns over, but doesn't start, it is NOT the starter. If all you hear is a clicking sound, or the starter motor engages but doesn't have the power to turn it over, then it could be wither the starter or the battery. A quick and easy check when this happens is to turn on the interior light. If, when you turn the key and get the click or no activity, the interior light dims way down or goes completely out, it is probably the battery. If you turn the key and get nothing at all, things are more difficult. The interior lamp test should be performed. If the light goes out immediately, try the battery. If the light doesn't flicker or dim at all, then the problem could be the starter, the starter relay, the Park/Neutral Position (PNO) switch, the ignition switch, or the IGN E (Fuse 22) or IGN A (Fuse 34) fuse in the fuse block under the hood.

b9ee8e9d-f35d-4193-abd2-5d6ce9f4b7f7.gif

Nov 10, 2013 | 2000 Oldsmobile Bravada

1 Answer

2000 Olds Bravada Key operates all electrics but will not turn ignition Could key be faulty


ignition switch has a anti-theft type lockout in the electronic switch inside steering column - have also had mine do this due to bad connection at the battery - remove both battery bolts and clean terminal and make sure you have a good connection - have also had my starter go out and does same thing - all lights and electronics but no start - had all 3 of these on my bravada in one week!!

Jun 01, 2010 | 2000 Oldsmobile Bravada

1 Answer

2002 Dodge Caravan, 3.3l,V6 Wont Start.All my gauge lights work. Cant hear click when turn ignotion over from starter. Took to shop to have check engine codes diagnosed, they changed oil and we started it...


The ringing/dinging only started last friday, so its not when i put the key in it. Its a fast ringing and when i take the key out it does it for like 45 seconds

Feb 03, 2010 | 2002 Dodge Caravan

2 Answers

Will inserting the wrong key in the ignition of a 2003 focus screew up the PATS? I replaced the key cylinder that had locked up. I inserted the wrong key (non PATS) The one for the doors. It turned the...


inserting the wrong key wont damage the pats its just a no start condition.using a non pats key wont solve the problem either.when using unprogramed key the pcm will disable the ignition system and the starter

Jan 14, 2010 | 2000 Ford Focus

1 Answer

My key wont turn and the steerring lock is stuck on


The malibus grand ams and aleros all had the same problem. you are going to need to replace the ign cylinder. You may be able to turn the key by lightly taping the end of the key with a hammer and turning at the same time. If you do get it to turn go get a cylinder from the dealer replace the cylinder. You have to program the theft. When you replace the cylinder try to start the car and leave the key in the on postion untill the the theft light goes out and you shopuld be fine.

Sep 04, 2009 | 2003 Chevrolet Malibu

1 Answer

2000 Old Bravada - key won't come out


Do you have a floor shift or column shift? I'll look up the wiring to tell you how to byapass it.

Jun 11, 2009 | 2000 Oldsmobile Bravada

Not finding what you are looking for?
2000 Oldsmobile Bravada Logo

652 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...