Question about 1996 Chrysler Cirrus

2 Answers

Coolant sensor i re placed a coolant temp sensor on 95 chrysler cirrus 2.5 .check engine light stay on/ code 22 from what the book say. how do i fix this. james

Posted by on

  • bogieson Oct 26, 2008

    I have a 1996 chrysler sirrus lxi 25 valve v6 that just bought off a guy a week ago, which all of the sudden died on me. I was out driving around, when I went to fuel up I checked the radiator coolant but didn't put the rad cap on properly. When I returned home I had noticed that it was bubbling out all over the place. The car died on me the next day on the way to work. After work I filled the coolant up and the car ran on and off enough for me to get it home( 1km) I figured it was the fuel pump because i've had that same problems on different vehicles in the past. I ended up changing the fuel pump but is not the problem. Any advise?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

HOPEFULLY YOU DIDNT OVERHEAT THE ENGINE WHICH WOULD BLOW HEAD GASKETS OR CRACK HEADS OR LEAD TO LOW ENGINE COMPRESSION IN CYLINDERS.

Posted on Apr 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,066 Answers

Refill and bleed the cooling system.  The water from your overflowing radiator may be the cause of you engine problems....dry of the motor.

Posted on Mar 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the book say in hours to replace the timing / water pump on a 1997 chysler cirrus 2.5 v6 ? Or in your opinion what's a fair price to have this done by private person coming to the house .


Replacing Chrysler 2.2 and 2.5 liter engine timing belts

www.allpar.com/fix/timing-belt-22.html
Replacing the timing belts on Chrysler and Dodge 2.2 and 2.5 liter ... Then loosen the bolts on the crankshaft pulley and the water pump pulley so they will be ...

HOW TO PUT WATER PUMP ON - 1997 Chrysler Cirrus

repairpal.com > Questions > Chrysler > Cirrus > 1997 Chrysler Cirrus
Jul 4, 2010 - WATER PUMP WANT HOLD WATER LONG AND NOW IS MAKING A ...If you change the water pump,you need to also change the timing belt ...

Timing belt - 1995 Chrysler Cirrus - RepairPal


Nov 24, 2015 | Cars & Trucks

1 Answer

What is diagnostic code 22 for a 1994 Jeep Cherokee grand limited


That code is for the engine coolant temperature sensor. "...input above maximum acceptable voltage." I would try a new temp. sensor. If that doesn't fix it, you may need to have an engine scanner hooked up, and see what the sensor is sending to the computer, and go from there.
A bad coolant temp. sensor can cause hard starting like your symptoms.
.

Apr 25, 2014 | 1994 Jeep Grand Cherokee

1 Answer

I am getting diagnostic code 22


Error Code: 22
Description: Engine Coolant Temperature circuit malfunction.
Possible Causes:
- Wiring.
- Coolant Temperature sensor defective.
- ECM.

Apr 25, 2014 | 1993 Jeep Grand Cherokee

2 Answers

So i got a 2000 chrysler cirrus and today the speedo stop working followed by the check engine light coming on what should i look for


Take it to parts store and get trouble code. I think a sensor went out in the transmission. Doest sound bad but should hook up to diagnostic took soon to make sure

Oct 05, 2010 | 2000 Chrysler Cirrus

2 Answers

What is code 22 on a 1995 chrysler cirrus with a 2.5L. I retrieved this by cycling the key.


Code 22 is coolant sensor voltage low. Sounds to me like the coolant temperature sensor is failing and should be replaced.

Dec 16, 2009 | 1995 Chrysler Cirrus

4 Answers

99 chrysler cirrus lxi won't shift out of 2nd, no speedometer


Had the same problem on my 1999 cirrus lxi. Replaced the output speed sensor on the tranny and topped off the tranny fluid... cleared the check engine light and the cirrus ran great. Caution...the output speed sensor reqires removal of the front left tie and plastic weatherproofing to replace. once you find it's locvation, the replacement is relatively easy.

Oct 30, 2009 | 1999 Chrysler Cirrus

2 Answers

Where is coolant drain plug on 1996 Chrysler Cirrus?


The coolant drain plug is located on the bottom left side of the radiator when looking from front of car. To access it you must remove the passenger side fog light and push the rubber cover out of the way.

Jun 23, 2009 | 1996 Chrysler Cirrus

1 Answer

Check engine light


Code 12.................Problem with the battery connection. Direct battery input to PCM disconnected within the last 50 ignition key-on cycles.

either a loose connection or the battery dead or removed within 50 last times you turned on the car, check battery terminals for corrosion or loose connector, and check the earth wire for corrosion, the code will dissapear by itself if the power is not removed again

Apr 11, 2009 | 1995 Chrysler Cirrus

1 Answer

Check engine light comes on


Code 12 means That the Crankshaft position sensor may need replacement.It is located near the crankshaft maybe under the timing cover.

Apr 07, 2009 | 1995 Chrysler Cirrus

Not finding what you are looking for?
1996 Chrysler Cirrus Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...