Question about 1994 Ford Taurus

1 Answer

'94 taurus, no turn signals

No turn signals.fuse,ok. can't find flasher. have turn ***. out of column. how do i test?

Posted by on

  • ajc27388 Oct 16, 2008

    wbgossard:i do have hazards. can i check conitunty on terminals? thanks for your help,ajc27388

  • ajc27388 Oct 21, 2008

    brent,i guess i was thinking the worst.first solution worked.went to pick-a-part and got another switch. thanks for all your help,joe(ajc27338)

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The switch in the coulum is typicaly the problem. Do you have hazards?

Posted on Oct 16, 2008

  • wbgossard Oct 17, 2008

    Yes you can but it take a lot of work. you could go to the library and look in one of the Mitchel books and find a wiring diagram to help with the many wires to sort out. also they have trouble shooting guilds in them to help you test out the circuit. This is what the mechanic will do that you take it to to fix it.

    Brent


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the flasher relay on a 2002 monte carlo


It's part of the hazard switch. have to take trim panel off to replace it .Apply the parking brake.
If the vehicle is equipped with a column shift, position the transaxle shift control indicator to 1.
Adjust the steering wheel for access.
Using a small, flat-bladed tool, gently remove the bezel from the ignition lock cylinder.
For the Impala, remove the right and the left access covers from the instrument panel (IP) fuse block.
For the Monte Carlo, remove the left access cover from the IP fuse block.
Remove the steering column filler. Refer to Steering Column Opening Filler Replacement .
For the Monte Carlo, open the instrument panel compartment door.
Remove the trim plate screws from the IP cluster.
Start at the left side of the IP cluster trim plate. Grasp the trim plate and carefully pull rearward. Disengage the IP cluster trim plate in order to easily access the hazard warning switch
Disconnect the electrical connectors from the hazard warning switch.
Remove the hazard warning switch from the IP cluster trim plate.


13710300-sqgggmolzf4u4c55ip0gdkvq-5-0.jpg It's probably the switch on the steering column ! An not the flasher but you never know without testing .
Turn Signal Lamps and/or Indicators Inoperative
Step
Action
Yes
No
Schematic Reference: Exterior Lights Schematics
1
Did you perform the Lighting System Diagnostic System Check?
Go to Step 2
Go to Diagnostic System Check - Lighting Systems
2
Turn the ignition to the ON position.
Place the turn signal switch to a turn left or a turn right position.
Do the turn signal tamps flash ON and OFF?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 3
3
Disconnect the hazard switch.
Connect a test lamp between the TURN SIGNAL Fuse battery positive voltage circuit and ground.
Does the test lamp illuminate?
Go to Step 4
Go to Step 7
4
Reconnect the hazard switch.
At C201, connect a test lamp between the turn signal flasher supply circuit and ground.
Does the test lamp flash ON and OFF?
Go to Step 5
Go to Step 6
5
At C201, connect a test lamp between the turn signal flasher supply circuit of the hazard switch and inoperative turn signal lamps supply voltage circuit.
Does the test lamp flash ON and OFF?
Go to Step 9
Go to Step 8
6
Test for a high resistance or an open in the turn signal flasher supply circuit. Refer to Wiring Repairs and to Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 11
Go to Step 10
7
Repair a high resistance or an open in the TURN SIGNAL Fuse battery positive voltage circuit. Refer to Wiring Repairs and to Connector Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 11
--
8
Repair a high resistance or an open in the turn signal lamps supply voltage circuit. Refer to Wiring Repairs and to Connector Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 11
--
9
Replace the turn signal switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column.
Did you complete the replacement?
Go to Step 11
--
10
Replace the hazard switch. Refer to Hazard Warning Switch Replacement in Steering Wheel and Column.
Did you complete the replacement?
Go to Step 11
--
11
Operate the system in order to verify the repair.
Did you correct the condition?
System OK
Go to Step 2

Jul 21, 2012 | 2002 Chevrolet Monte Carlo

1 Answer

Turn signals and brake lights won't function


GET A GOOD FUSE TESTER, TEST EACH FUSE. THERE ARE 2 FUSEBOXES. ONE UNDER THE HOOD & ONE IN THE DASH. ALL FUSES CAN BE TESTED WHILE STILL IN PLACE. THERE ARE TEST POINTS FACING OUT. TURN ON IGNITION SWITCH FOR THIS TEST. POWER ON 1 SIDE, BAD FUSE POWER ON BOTH SIDES, GOOD FUSE. POWER ON NEITHER SIDE, SPARE FUSE.

IF ALL FUSES RELATED TO THIS PROBLEM TEST OK, CHECK OR REPLACE THE TURN/SIGNAL/HAZARD FLASHER, { LOCATED UNDER DASH, NEAR STEERING COLUMN, PROBABLY SQUARE & BLACK. IF THAT'S OK, IT WILL HAVE TO BE THE TURN SIGNAL/ HAZARD SWITCH. ALSO CALLED COMBINATION SWITCH. REMOVE THE PLASTIC HOUSING AROUND THE STEERING COLUMN UNDER THE STEERING WHEEL. IT LOOKS LIKE THE AIRBAG & A LOT OF SPECIALIZED TOOLS WILL BE NEEDED. YOU MAY HAVE TO EMPLOY A RELIABLE SHOP IF THE COMBINATION SWITCH IS THE PROBLEM

Jan 10, 2011 | 1996 Chevrolet Cavalier

2 Answers

How to change the signal flasher


Models from 98 on use a combination flasher. This flasher is mounted either on the front or on the back of the junction block.
The combination flasher is a smart relay that functions as both the turn signal system and the hazard warning system flasher. It is designed to handle factory-fitted equipment. If aftermarket equipment is added to this circuit (such as trailers with lights), the flasher will automatically try to compensate to keep the flashing rate the same.
  1. The flasher contains sophisticated internal circuitry that cannot be tested with conventional equipment. Substituting a new unit for a suspected defective version is the easiest test.
  2. On air bag-e quipped vehicles, disconnect the battery negative cable(s) and wait two minutes from the air bag capacitor to discharge.
  3. Remove the junction block cover. If the flasher is accessible, grasp and pull the flasher from the fuse panel.
  4. If the flasher is not mounted on the outside of the junction block, remove the steering column cover from the instrument panel. Reach through the opening to access the fuse block on the back of junction block. Pull off the flasher.
  5. Inspect the socket for corrosion or any other signs of a bad contact.
To install:
  1. Install a new flasher in the connector.
  2. Install the fuse panel cover.

zjlimited_225.jpg

Fig. Removing the steering column cover for access to the flasher


zjlimited_226.jpg

Fig. Early style flasher system: dual flashers mounted on junction (fuse) block. The turn signal flasher is the lower of the two; hazard flasher is the higher one

zjlimited_227.jpg

Fig. Combination flasher location (1) on fuse block (2) (later models)


Hope helps (remember to rate and comment this answer).

Dec 14, 2010 | 1999 Dodge Durango

2 Answers

1990 buick lesabre turn signals don't work,hazard flashers work, bulbs are ok, running lights & brake lights work, just installed a new turn signal assembly, thought that would fix the problem, it did...


the turn signal flasher is a small canister-shaped or rectangular unit located under the dash, either in a clip adjacent to the steering column or in the convenience center which is located located under the right side of the dashboard and houses relays and other components. The fuse.faulty flasher unit a broken switch or a loose or open wire. We have eliminated the switch, I would check all fuses inside and out, you can replace the flasher with the hazard flasher as if I remember correctly they are the same shape and size, then it is just a matter with a tester light running it from the column to the sockets and finding the break. Hope this helps Tim

Oct 31, 2010 | 1990 Buick LeSabre

1 Answer

Where is the turn signal relay, hazard relay, and flasher for a 2003 Ford F150? My turn signals do not work (inside or outside), but 3 out of 4 outside lights work when the hazards are on, but with only 1...


It is not the flasher if the hazards work, it is 1 flasher for both turn signals and the hazard lamps. It is in a relay block ( along with the blower motor relay ) under the dash, about in line with the steering wheel column ).

Try tilting the steering wheel all the way up, and test again.

The other quick test is to cycle the hazard switch a few times, to see if it cleans the contacts for the turn signal on the MFS,

Apr 01, 2010 | 2003 Ford F150 Regular Cab

3 Answers

I have no brake lights or turn signals on my 95 gmc truck. I have replaced the boards but no luck. Also have checked fuses.


OK if the fuses are good , use a test light and check to be sure you have power at the fuse terminals. you'll check from ground to the terminal on top of the fuse. you should have 12vdc. then , check for power at your brake light switch on both terminals while the brake pedal is pressed, it is located located on the brake pedal assembly. also , check your hazard flasher switch to be sure it is not on. if it was on, check your flashers, both the turn signal and hazard flasher. If everything checks out , your problem is probably in your turn signal switch assembly located in your steering column.

Mar 14, 2010 | 1995 GMC Sierra

Not finding what you are looking for?
1994 Ford Taurus Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...