Question about 1993 Jeep Grand Cherokee

1 Answer

Replacing 1993 Jeep Grand Cherokee wiring harness in driver's door

Any suggestions or probelms to watch for when replacing the wiring harness from under the dash into the driver's door?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 25 Answers

Watch the vaccuum lines very carefully. they are hell to track down and replace. other than that, just make sure you get everything correct. jeeps freak out when you screw up even just 1

Posted on Oct 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 jeep grand cherokee has issues with windows rolling down and the automatic door locks.. Neither will work on any door. The sunroof will roll back however.


Had a similar problem... the wiring harness that goes inside the drivers door had a broken wire, hence no power would go to the door locks or the power windows. Check the area where the harness flexes when the door opens and closes.

Oct 12, 2010 | 2004 Jeep Grand Cherokee

3 Answers

2004 jeep grand cherokee windows will not work, door locks will not work, mirror controls will not work, interior lights will not go OFF!!!! I can't locate the fuse. Any recommendations


Also check the ground wire that goes through the rubber boot at the door hinge, mine broke on both sides and screwed up the electrical system

Jul 14, 2010 | 2004 Jeep Grand Cherokee

1 Answer

The power windows and radio dont work. i switched out the relays and still nothing. its a 94 jeep grand cherokee


problem is not related. the wire harness in the drivers door [**** rarely passenger door] has one or more broken wires inside that rubber belows in between the door hinges.

Apr 27, 2010 | 1994 Jeep Grand Cherokee

1 Answer

None of the switches on the drivers side door of my 04 Grand Cherokee are working. Is this a problem that I can fix myself? Any suggestions?


Check the harness that passes through the door post into the door. They often break wires in there from flexing.

Feb 28, 2010 | 2004 Jeep Grand Cherokee

2 Answers

The electric windows on 1993 Jeep Grand don't work.


You would have to take the door panel off to take the window motor off, then run jumper wires to the window motor terminals. If the motor doesn't turn, time to get a new one. But more than likely, if all the windows don't work, it may possibly be a fuse. Also, you might want to check the window switches, they do burn out. I have had to replace a couple on my 1993 Jeep Grand Cherokee.

Feb 23, 2010 | 1993 Jeep Grand Cherokee

2 Answers

None of my windows work in my '93 jeep grand cherokee there are no blown fuses i can see. could there be a relay? im lost


Try the drivers side switch panel, it's the master switch. Ck your local salvage yard to save $$

Jul 28, 2009 | 1993 Jeep Grand Cherokee

2 Answers

Alarm wont disarm and unlocking doors does not work any suggestions?


I just had the same problem with my 1995.. believe me its a pain! by the way on the driver side below the steering wheel close to the door there should be a hidden pink (or any color) plastic box which basically controlls the cars security system... i removed it and i was good to go...try that... the only thing though is that you wont be able to lock the doors automaticaly, ull have to do it manually

May 17, 2009 | 1993 Jeep Grand Cherokee

3 Answers

1999 Jeep Grand cherokee


Check the wiring between the drivers door and the A pillar(the body of the car). Sometimes the harness breaks from opening and closing the door.

Nov 07, 2008 | 1999 Jeep Grand Cherokee

1 Answer

Replacing a drivers side mirror


There is a panel on the inside of the door where the mirror is.
That has to come off.
In some cases the door panel has to come off also.
Under the mirror panel there are nuts that hold the mirror on. Remove the nuts unplug the harness and install the new one.

Oct 07, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...