Question about 2004 Pontiac Grand Am

3 Answers

Blinker Signal The "dinger" for my blinker is stuck on and dings all the time, even when my directional lights are off. How do I fix it or why is it happening?

Posted by on

  • yadayada
    yadayada May 11, 2010

    Are the signals flashing all the time, not sure what you mean by dinger?

×

3 Answers

Http://www.jonko.com/auto_repair_forums/index.php?showtopic=15809

Check out this site as I had the same problem and these guys gave possible solutions.

Posted on Oct 23, 2008

I have the same problem. I thought it was because I installed an aftermarket radio. It just started one day.
Mine is random though. The "ticking/dinger" sound isn't consistant, it just happens randonly. It has nothing to do with the battery.

It really doesnt do it anymore. I dont know why It has stopped.

Just letting you know I had the same problem and unfortunaly dont know how to fix it.

Posted on Oct 20, 2008

The noise maker is stuck on, not the lights or arrow signals. So even when the signal is turned off, the noise maker is still activated.

Posted on Oct 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 GMS Sierra 1500 Sound / speakers / blinker


on all modern gm vehicles , the blinker noise and dining noise goes through the left frt speaker so if you speakers arent workin thats your problem call a dealer with your vin

Oct 24, 2012 | 2011 GMC Sierra 1500

1 Answer

Left blinker is fast front blinker light working left rear blinker light not working.


When a turn signal bulb is blinking fast, it is an indicator that a bulb is bad in the system. Replace the left rear turn signal bulb, then see if the left front blinker has gone back to normal. This is most likely your problem. Let me know if it is still a problem and i will help you fix it. Good luck

Dec 05, 2010 | 2002 Mercury Mountaineer

1 Answer

My blinkers and flashers all quit working at the same time. Indicator lights in the dash won't even light up. Do flashers and blinkers run off the same fuse?


The do not run off the same fuse but they do run off the same blinker. Try turning on the key, click the left/right (check both) turn signal and then operate the 4 ways on and off at the same time. Work the 4 way switch back and forth 10 to 25 times and see if you get any short winks or blinks from the system.
Turn signals are usually on their own fuse in the glove box and hazard are on with the brake fuse. If this does not work, I would look at the blinker. It is possibly bad. Check each pin of the blinker and see if there is power there when you turn on the 4 ways or turn signals. Replace Blinker. Make calls to parts stores and dealer for location of this blinker.

Mar 21, 2010 | 1995 Buick Regal

1 Answer

TURN SIGNAL, BRAKE & HAZARD LIGHTS


No Turn Signal Operation (blinker)The turn signal lights in your car are a basic electrical system that controls the front and rear blinker lights to alert the intended direction of the vehicle. We have listed some of the most common problems and repair troubleshooting tips below:
Troubleshooting Procedure
To start troubleshooting this problem:
  • Turn the key to the on position (do not start engine)
  • Inspect the system fuse located in the fuse panel and replace if needed. If you cannot find the location of the blinker fuse consult your owner's manual or an online repair manual
  • When a blinker flasher fails it can cause blinker lights to say on, not blink, or not go on at all. To test the blinker system flasher, remove the flasher unit and insert a jumper wire between the two terminals. If blinker stays on in both directions without blinking, replace the flasher. If you cannot find the location of the blinker flasher consult your owners manual or an online repair manual.
  • 1b7f814.jpg

Jul 09, 2009 | 1999 GMC Denali

1 Answer

Right rear blinker doesn't work. Brakes light comes at wrong time


You have a wire shorting out somewhere. Inspect from tail light forward. A test light will probably help you.

May 03, 2009 | 2004 Chrysler Sebring

1 Answer

2000 blazer break lights stuck on


check the gruond in the black wire in the blinker switch if its ok, sometime the after market parts have ashort life time try to replace the flasher switch ( blinker switch)

Mar 07, 2009 | 2000 Chevrolet Blazer

2 Answers

1999 Jeep Cherokee


the easy part first...the blinker flashing fast means one of the bulbs is burned out and needs replaced.
the abs light being on is the more difficult to resolve. it is telling you that something is wrong in the abs system. you need to find a dealer or reputable garage to pull the codes to give you a direction to go as how to repair.

Jan 09, 2009 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...