Question about 1994 Eagle Vision

2 Answers

Timing tension pulley

My tension pulley broke on my 94 eagle vision tsi, I need to know the where the #1 spark plug is located,

Posted by on

  • 5 more comments 
  • angelndiskey Oct 15, 2008

    3,7 engine... I need to find the diagrahm for the spark plugs .... the tension pulley has been replaced and the belt need to be put back on but they are saying that the Number 1 spark plug needs to be removed.

  • angelndiskey Oct 15, 2008

    It says its a 3.7 but what is the spark plug diagrahm for the 3.5L?

  • angelndiskey Oct 24, 2008

    I am sorry, it was a 3.5 liter.... I really appreciate it and my car is now running again. You guys rock.

  • Anonymous Mar 02, 2009

    where do the cam and crank gear need to be positioned when putting the timing belt back on?

  • yadayada
    yadayada May 11, 2010

    Could be an error at my source, still looking

  • yadayada
    yadayada May 11, 2010

    I looked this up they don't show a 3.7L V6 just a 3.5L V6, you are sure about the engine size??

  • yadayada
    yadayada May 11, 2010

    What engine do you have?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 55 Answers

LMAO there is NO 3.7L Eagle Vision they only go 3.3 and 3.5L

Posted on Jan 29, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Eagle Master
  • 70,347 Answers

Here is is.

1994 Eagle Vision
3.5 liter SOHC V-6 VIN "F" Timing tension pulley - 56539136.gif

Posted on Oct 15, 2008

  • yadayada
    yadayada Oct 15, 2008

    Here it is again.

  • yadayada
    yadayada Oct 15, 2008

    # 1 cylinder is rear center cylinder, please rate this, hard to find this information

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'94 eagle vision Tsi started running very rough and has a bad lag when accelerating. I tried using some injector cleaner and helped a little but I am wondering if maybe it is a vaccuum hose or some type of...


Could be a number of issues
Tune up (plugs, wires, ect)
fuel filter
fuel injectors
Could be a vacuum hose, listen for hissing under the hood
water in gas tank

Nov 10, 2013 | 1996 Eagle Talon

1 Answer

How to change spark wires eagle vision 1995 3.5 tsi


get new wires , pull the old ones out turn them and pull they come right out , easy to do ,

Jan 09, 2013 | 1997 Eagle Vision

1 Answer

My mom has an 1996 eagle vision. it died on her. no noise. we replaced the water pump thermastat timing belt that melted and broke plus the timing belt tensioner. the car rolls over smoothly but does not...


Remove the spark plugs and run a compression test. I'd guess you will have low-to-no compression. Two likely causes:
1: you did not get the crankshaft and camshaft correctly aligned when you put the new belt on. If this is the case, all cylinders will have about the same compression, but will be very low. Are you absolutely sure that you got the timings marks correct when you put the belt on?
2: the valves were damaged when the belt broke, open valves and pistons coming up. Talk to the parts department of you local Chrysler dealer, and ask if this engine has "negative valve clearance". If that's the case, you will need to pull the head and have the valves repaired. In this case, a few cylinders may have good compression and a few others may have low-to-no compression.

Of course it it also possible that you failed to connect something when you put it back together, and you are not getting spark or gas. Test for that first.

Apr 28, 2011 | 1996 Eagle Vision

1 Answer

When should i change the water pump in a 1996 eagle vision tsi


Change the water pump when it starts leaking or, if you have over 100,000 miles on the car, and you are doing additional work like changing the timing belt. If it will give you peace of mind, go a head and change it. Otherwise, leave it in the car and let it work.

Sep 06, 2010 | 1996 Eagle Vision

2 Answers

I need help to replace the timing belt well theres two rubbers its the lower rubber that broke. HELP PLEASE....


Well my friend first I need to know a little bit more. Now when you say rubbers, what do you mean? Your timing belt and gears consist of a cam shaft gear or sprocket, a crank shaft gear, and a tensioner located under the valve cover and behind the timing cover that is behind the crank shaft pulley. Can you help better understand which rubber thing broke?

Aug 18, 2010 | 1988 Toyota Pickup

1 Answer

I just bought a 94 eagle vision tsi 3.5 and the owners manual is gone can anyone tell me what type of oil this car takes


5/40 semi synthetic and change it every 10k with the filter.regardless of what makers say engines last longer with regular oil/filter changes.

May 01, 2010 | 1994 Eagle Vision

1 Answer

I need to know where the fuel pump is located on a 1994 eagle vision tsi


The fuel pump on your vehicle is located in the gas tank! I believe there is an access hole from the trunk. The hole has a plate over it. Remove the plate, and follow directions to remove pump.
Recommendation: Repair manuals are always the first "tool" to get when you're planning on working on your vehicle.

If this info was helpful, please post... Thanks...

Jun 27, 2009 | 1994 Eagle Vision

1 Answer

1996 Vision Eagle TSI 3.5L does not keep running


SOUNDS LIKE A SECURITY PROBLEM HAVE VEHICLE SCANNED LOOK FOR SECURITY ON IF AFTER MARKET ALARM UN PLUG MODULE

May 20, 2009 | 1996 Eagle Vision

1 Answer

1993 Eagle Talon Tsi starts rough then dies off, bad timing?


First thing you can do to try a simple fix is replace each spark plug, check each plug for signs of fuel/air mixture

if your plug is black is rich, if ur plug is white is lean.

in this case repost your findings. in the mean time if they look golden or light brown, replace them and make sure they are gapped to ur level of psi you are running.

you can find the gap specs for how much boost you are running on most DSM websites or by searching.

Mar 27, 2009 | 1993 Eagle Talon

Not finding what you are looking for?
1994 Eagle Vision Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Stewart Dibbs

Level 2 Expert

267 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...