Question about Acura Legend

1 Answer

I have apart need to know what is for Mitsuba Relay ***'y, Main RZ-0105

Posted by on

  • 1 more comment 
  • patricia907 Oct 15, 2008

    where will a be albe to buy this part and what do I ask for?

  • patricia907 Oct 16, 2008

    Thank you so very much.

  • yadayada
    yadayada May 11, 2010

    Could you please explain what you are talking about?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

Hi...
The Relay RZ - 0105.
Is the Main relay...
Thsi relay is used to : Powered the FUEL PUMP, INJECTORS, IGNITION COIL and the more important The ECM " Engine control module"

Mitsuba is the Brand...

Ok. I hope this help on your question.

Thank you for use fixya..

Posted on Oct 15, 2008

  • Juan Guillen Oct 16, 2008

    Ok....

    You can get this part on some autoparts.

    You have to ask for The Fuel Pump Relay, They will ask for the Part number.

    And you wil give the RZ-01105.



    Some times they don't have. And tell you that is Dealer Item. and you will need to go to the Dealer.



    Ok.. I hope this help on question..

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car will not start...its not the starter...but acts like its not getting fuel


Try replacing the fuel pump main relay. My 90 accord had the same problem when the main relay went bad, it would take almost 10 tries to start. The Fuel pump main relay is located under under the dashboard on the far left side. The main relay is held in by a 10 or 12 mm bolt. It is small, grey, and says mitsuba main relay on it. replacing this should fix your starting problem. Also check all fuses.
Hope this helps
Matt

Jun 13, 2011 | 1990 Honda Accord

1 Answer

Is the rz-0033 main relay interchangeable w the rz-0028 main relay for 1985 honda accord sei?


If two relays on the same car have two different part numbers on them, there is usually a reason why.

Jan 15, 2011 | Honda Accord Cars & Trucks

1 Answer

Turns over but doesn't start. its been a particularly cold winter, and it wasnt driven much for 3 months, but was started regularly. sometimes it would take a few tries but would eventually start. now it...


Try replacing the fuel injection main relay, these are a very common problem. Sometimes called the PGMFI relay. It is located way up under the dash on the drivers side. It's about 1"x1"x2" and has "Mitsuba" written on the side. If you're handy with a soldering iron, you can pop it apart and resolder the two relays terminals, they crack, otherwise, just buy another.

Jan 24, 2010 | 1995 Honda Accord

1 Answer

Need a new one. Honda Main Fuel Relay 86-93 Mitsuba RZ-0063


Either secondhand from a breakers yard or try and find a company that does replica ones.

Oct 11, 2009 | 1992 Honda Prelude

3 Answers

Locating the daytime running light module for 90 accord


Its a light grey square box. U will either find it under the dash around the steering column or on the driver side up the inside fender area. Take it out and resolder all the hairline cracks and it will be good as new.

Jun 21, 2009 | 1990 Honda Accord

2 Answers

Main relay location


The main relay is located behind left side of the dash and above and behind the fusebox and above the hood release.

rate this solution fixya.

Diagram below:-

Acura Main Relay location and removal procedures.
mainrelaylocationacura.gifrz-0063.jpgIntegra EFI Main Relay for:
  • Honda Civic/CRX/del Sol 1984-1995
  • 1986-89 INTEGRA
  • 1990-93 INTEGRA #39400-SH3-003 RELAY (RZ-0063)
  • 1986-90 LEGEND #39400-SH3-003 RELAY (RZ-0063) (RZ-0046)
  • 1991-93 LEGEND (rz-0105)
  • VIGOR (behind the left front kick panel)
The main relay is located behind left side of the dash and above and behind the fusebox and above the hood release. The First generation Legend main relay location is between the steering column and the fuse box. It's deep in there. There was a little difficulty drawing the relay so it's actually very deep in there. There is a device (a relay) blocking the main relay. You will need to remove it to get a view of the main relay. The removal procedure is the about the same as the Accord's procedure.

mitsubalegend.jpg
Legend, 96-98 Acura TL main relay
Acura Integra 98-01 main relay location:
integra98-01mainrelay.gif
Locating the main relay using your ears and fingers:
Steps:

1. Turn the ignition to ON. You should hear two clicks (a thousand of a second apart) under the left or right side of the dash board. One click is for the ECU/Injectors the other is for the fuel pump. At this moment the check engine light should come on.
2. Listen carefully at the moment the clicks engage (usually somewhere underneath the dashboard.) Reach in and touch the main relay.
3. 2 seconds later you should feel a click if the main relay is at least working or wait until it works. At this moment the check engine light should go out.
4. Turn the ignition to start and you should feel a click, turn engine off you should feel another click.
5. Most main relays should have seven terminals. Please check if the location is already listed below.

How do I get the main relay out?
Steps: See four ways below so you can get it out. First you have to reach high up in there and do all this with one hand and a flashlight.
efiremoveinstall.gif A. Unbolt the bolt using a 10mm socket (picture A) or
Ab. Unclip the clip from the steel tab and slide it apart (picture A) or
B. Separate the steel tab from the plastic case (picture B) with a large flat screw driver jam and twist between the plastic case and the tab or
C. Disconnect the negative battery terminal. Unclip two clips I pointed with two arrows (picture C, or below) with a small flat head screw driver or with a strong thumb and then yank it out (D.) This is the preferred choice by many. Mechanics prefer choice A and maybe B. See detailed relay circuit photo.
clip.gif

mainrelaydiagram.th.gif

May 24, 2009 | 1995 Acura Integra Coupe

1 Answer

Main rely,where can I find it? It´s -90 1,3 l


It is under the left side of the dash, next to the fuse box, bolted to the body of the car. The relay says "Mitsuba" under that
"relay assy. main". It may be difficult to get to, sometimes you can unplug the relay, leave the old one there, and plug the new one in and tape it to the harness. Good luck, Honda Al

May 04, 2009 | 1990 Honda Civic

1 Answer

Fuel pump is not pump fuel after replaceing fuel pump


You need to replace the PGMFI relay up under the drivers side dash. It is sometimes called the main relay or the fuel injection relay. It is 1"x1"x2" and will have "mitsuba" written on the side. If you get it out, I can tell you how to fix it for free if you know how to solder, or you can by a new one at any auto parts store for about 50 bucks.

Mar 19, 2009 | 1991 Honda Accord

1 Answer

Main relay assembly for 1995 Honda Accord


the relay cover slides off very easily so you can expose the circuit board take your pgmfi relay apart and you will see two small relays on the board look at the contacts for the relays to see if theyre burnt then turn the board over and look at the sauder joints at least one of these will probably be burnt or not enough sauder will be ther to make a good connection.Look real carefully at these i use a magnifying glass my self because i have seen numerous times where the sauder will have a small crack (like a ring or circle) around it causing a poor connection these are the most common problem with these relays (almost the only problems) i have seen in the past six years that i have worked at my local honda dealer

Dec 12, 2008 | 1995 Honda Accord

2 Answers

Acura tl won't start


Ignition switch problem?

Jul 02, 2008 | 1999 Acura TL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...