- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it has a normal headlight system than yes the high and low beam are the same bulb the part number will be 1255/H7
If you have HID headlights than you will have a seperate high and low beam bulb.
Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!
I would first check the fuse for the lights. It could be blown bulbs but odds are they don't blow at the same time. Sometimes when the bulb blows, the fuse goes too so you could also need a new bulb. Good luck!
Sounds like the headlight switch itself... You can verify by removing the switch and checking continuity across the switch (with a meter or powered test light) in the on position... hope this helps...;-)
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam
(separate highs and separate lows, but will be same screw if highs and
lows are the same bulb). You may also have additional horizontal
adjustment screws as well
your car on a level ground 30 feet from a wall and measure the height
from the ground to the bulb and mark on a wall (do this for highs beams
and low beams if the bulbs are separate, if highs and lows are the same
bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then
aim the brightest part or cutoff part just below the mark on the wall.
If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.