Question about 1984 Jeep CJ7

1 Answer

Rear arb lock

Hi
having trouble installing arb rear lock.
it takes about 3 minutes to lock...

any ideas?
thanks

yogi

Posted by on

  • yogibear69
    yogibear69 Oct 15, 2008

    after it locks it works just fine...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

Arb air locker? make sure your getting enough air pressure and no lines kinked

Posted on Oct 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I repair or rebuild a locked up ac compressor pump or do I have to buy another ac compressor 2006 Impala 3.9 V-6?


I don't know if my air condition services were cheating me but I had twice problem with the compressor and after two different checkups both time they told me I had to install a new compressor. and that repairing it was not a good idea.

Oct 25, 2015 | AC Cars & Trucks

1 Answer

Galaxy 2005 o/s/rear door lock not working


YOUR ROD has fallen off or the Clip has broken... If the Solenoid is working correctly. No Matter, you have to take the Panel off to investirgate

Apr 12, 2013 | 2005 Ford Galaxy 1.9

1 Answer

Dash light is o?n saying ARBS what is ARBS?


Antilock rear brake system, You can have this checked but it wasn't much of a system in 89. Most people I know disable it and ignore the light. your brakes still work just fine

Nov 11, 2010 | 1989 Ford F 250

1 Answer

I have a 2005 escalade and rear door hatch lock is locked and will not unlock. how do I open hatch


Hi, my 2005 Cadillac SRX rear hatch is locked and will not unlock, do anyone have an idea or have come across the same proble. Thanks

Nov 05, 2010 | 2005 Cadillac Escalade Ext

1 Answer

Can somebody help me with instructions to fit Bt50 Bullbar


Contact ARB www.arb.com.au tell them you have brought one second hand and would like the instruction manual.

It is very easy to install.

Apr 13, 2010 | 2007 Mazda B Series

1 Answer

How do i remove the rear brake drums from a suzuki swift


Hi there,

1) With the vehicle jacked up and supported with axle stands, remove the rear wheels.
2) Using an old, thin, flat tip screwdriver and a hammer, remove the dust cap from the brake drum.
3) Using a 1/8" punch and hammer, tap out the lock nut indentation.
4) Using a 30mm, 1/2" drive socket and ratchet, unscrew the lock nut from the axle shaft.
5) Remove the flat washer from the axle shaft.
6) Ensure the hand brake is not applied.
7) Using a soft faced hammer, strike the outside edge of the drum repeatedly and all around while at the same time applying a pulling force on the drum. (This is best accomplished using two people and could take several minutes.) Be persistent!
8) Once the drum has been removed, tap or press out the wheel bearing from the inside out.
9) Clean and re-pack the wheel bearing with grease.

Good Luck!!

Thanks

Nov 18, 2009 | 2006 Suzuki Swift

1 Answer

Ford Explorer differential...


They were talking about having a locker added too the rear differential. Yes you can have a posi added if I was you I would go with a selectable rear locker, ARB, OX are just to name a few. Any good off road shop can help you withe the parts and install.

Jun 14, 2009 | 1998 Ford Explorer

1 Answer

Hi there!


Replace the blower motor resister behind the glove compartment. This corrects the blower issue. Don't know about the door lock problem.

Jan 02, 2009 | 2005 Chrysler Town & Country

1 Answer

ABS Light gives out three codes,Where can I get a list of codes to trouble shoot by?


Hi,

Most Honda ABS warning light will blink in 2 parts, main system and then sub system to form the code pair. As an example is 3 blinks then 3 blinks is a code 3-5. Once determined, reference below listing.
1 - ABS pump motor over-run
1 2 ABS pump motor
1 3 high pressure leakage
1 4 pressure switch
1 8 high pressure system
2 1 parking brake
3 1 pulser RF
3 2 pulser LF
3 4 pulser RR
3 8 pulser LR
3 12 different diameter tires
4 1 wheel sensor RF
4 2 wheel sensor LF
4 4 wheel sensor RR
4 8 wheel sensor LR
5 - rear wheel lock - R/L
5 4 rear wheel lock - R
5 8 rear wheel lock - L
6 - fail-safe relay - F/R
6 1 fail-safe relay - F
6 4 fail-safe relay - R
7 1 solenoid - RF
7 2 solenoid - LF
7 4 solenoid - R
8 1 ABS function
8 2 CPU comparison
8 4 IC self-check

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 25, 2008 | Honda Accord Cars & Trucks

Not finding what you are looking for?
1984 Jeep CJ7 Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...