- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Since the 91 model is obd1 there is no scan tool that can be hook up to it,but on the right kickpanel there is a two pin connector you can jump with a simple tool like a paper clip with the key on and the engine not running and this will cause the the mil to blink your code you will get a two different blinks a long one and a short one you combine both to get the code.example two long ones followed by one short is a code 21.
MY DAUGHTER HAD THE SAME PROBLEM. THERE IS A HOSE THAT GOES FROM THE VALVE COVER TO THE FUEL INJECTOR HOUSING. ITS ABOUT 12 INCHES LONG. THERE WAS A TINY LITTLE TEAR ON THE BOTTOM THAT I COULDNT SEE. I REPLACED IT WITH FUEL LINE TUBING THAT I BOUGHT FROM AUTOZONE. IT WORK PERFECT. I HOPE THIS IS YOUR PROBLEM. IT TOOK ABOUT 2 MINUTES TO FIX.
check if its getting spark if it is i would check the main relay very common problem .if no spark then i would check the ignition ignitor located in the distributor one last thing to check would be the ignition switch