Question about 2000 Ford F250 Super Duty Crew Cabs

1 Answer

2000 F 250 WILL NOT START CRANKS OVER ONLY.

About 2 weeks ago my truck would not start after checking spark and injector pulse it started. Took it to ford to have the fuel pump test only because I did not have the gauge. pump was ok. Left ford truck ran fine stopped and started it a couple of times. Then drove the truck about 250 miles home. Went out next day truck would not start it only cranks.
I get 4 injector pulses and then it stops. I have replaced the computer but it is the same exact problem. 4 pulses and it stops pulsing.
I do not have and alarm on it or the key sensor.
Any Help???

Posted by on

  • workbig Oct 27, 2008

    After an exhaustung search I found that one wire in the 32 pin Connection was loose.

    This was founnd by reconnecting everything that I disconnected and wouldn't you know it the dam thing started. So I went around to each connection and played with it. When I got to the 32 pin connecter I played with each wire and the engine shut down and I had the samething all over agian,

    Just cracking not starting.

    I tightened all the connections and the truck starts and runs fine.

    Thanks for your input.



  • Anonymous Mar 20, 2014

    no pulse

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

You should have the pcm scanned for dtc's... probably a bad crank or cam sensor

Posted on Oct 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 chevy colorado 5cyl cranks won't start has new fuel pump later it started than it died


Make sure battery has a full charge and battery connections all good. The basic tests for, it cranks good but won't start, have a helper crank it while you check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure. Also check fuel injector pulse
Have you had the battery disconnected?

Oct 22, 2016 | Cars & Trucks

2 Answers

07 chevy cobalt 2.2L no injectors pulse!the fuel pump works fine!when I spray starter fluid inside the throttle body & than the want to start...NEED HELP PLEASE!!! LIKE A.S.A.P


Hi,

I would check n replace the fuel filter if needed. Also, it could be one of the spark plugs. Was it running before? Can you think of anything that happened or changed recently?

Aug 08, 2016 | Cars & Trucks

1 Answer

2008 cobalt cranks but won't start


If it cranks good but won't start, have a helper crank it while you visually check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure. Also, check for a fuel injector pulse.
Can you check for applicable trouble codes? You need an obd2 code reader, at the least, to check codes.

Nov 29, 2015 | 2008 Chevrolet Cobalt

1 Answer

Car cranks but will not start


What is year--make--model and engine size? If it cranks good but won't start, have a helper crank it, while you visually check for spark at the spark plugs, where applicable. If spark everywhere, use a gage and check proper fuel pressure. Also, check for fuel injector pulse, where applicable.

Check for applicable trouble codes. If the vehicle is obd2, to check codes yourself, at the least, you need an obd2 code reader.

Check for an rpm signal.

Jul 26, 2015 | Cars & Trucks

1 Answer

2006 monte carlo engine cranks but will not start


If it cranks good but won't start, have a helper crank it while you visually check for spark at the spark plugs, if spark everywhere, use a gage and check fuel proper fuel pressure. Check fuel injector pulse.

Check your security system.

Feb 22, 2015 | 2006 Chevrolet Monte Carlo

2 Answers

06 gmc 4.3 liter cranks over will not start no fire starting fluid did not effect condition


check that the cam shaft is turning ( broken belt/ chain. check that the immobiliser is operational

Feb 02, 2014 | 2006 GMC Sierra

1 Answer

2007 avalanche has a new battery.it cranks but wont start


If the engine cranks but does not start, you would need to know if you have spark to the plugs and fuel to the injectors to proceed.

Feb 25, 2013 | 2000 Ford Explorer

1 Answer

99 cavalier theft light on continous


does it run 2 to 3 seconds? does the scurity light blinks? if yes leave the switch on after running 2-3 second wait till security light stops blinking then start if light still blinks you have wiring problem. if light just stay on you have spark and fuel check injactor pulse.always remember if you have good spark ,good fuel pressure and injector pulse car should start

Sep 15, 2009 | 1999 Chevrolet Cavalier

1 Answer

I have a 1994 ford f-150 5.0 engine. It will not start except with starting fluid. It has 45 psi fuel pressure, good spark to spark plugs, timing is dead on. It has no pulse to injectors while starting,...


It sounds like the (iac valve) idle air controle valve. When its running unplug it and if the truck shuts off replace the iac. it runs about $50 to $60

Dec 24, 2008 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

463 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...