Question about 2002 Dodge Stratus

2 Answers

2002 dodge stratus clutch removal

I bought a 2002 dodge stratus rt last month, and the clutch is slipping, so I am having a mecanic put a new one in. The problem is that he said he had to remove the motor in order to get to the clutch, and now he can't figure out how to get the clutch seperated from the transmission.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

First the engine does not need to be removed, a engine support bar is placed over the engine bay and hooked to the engine while the transmission is dropped, the clutch is bolted to the flywheel on the engine side and not on the transmission, if you are requesting info on how to seperate the transmission from the engine then you will need to support both engine and transmission equally so that there is no hang up between the transmission input shaft and the clutch splines, also be careful not to cause any damage to the pilot bearing or it will be harder to remove later, then use a pry bar between the two, being out of the car could be a bit more tricky,

Posted on Oct 14, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 86 Answers

If he had to remove the motor witch would be a front wheel drive car you would have to remove the motor, if its a real wheel you wouldnt. so my guess is to go to advanced auto parts an get a book about ur car it tells how to remove every thing. its like $12.00 or sumtin like that it would help you out

Posted on Oct 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0401 code


causes include --hose leakage / blockage, basic setting not carried out ( if applicable)--wiring---EGR valve ---EGR solenoid ---ECM

Jun 23, 2016 | 2002 Dodge Stratus

1 Answer

I need to know why my clutch feels lose in my 01 dodge stratus rt 3.0 v6 it's like it won't engage a lot of play when I go to push the clutch in


check for fluid level in the reservoir
bleed the air out of the system
replace the clutch master cylinder.

May 28, 2015 | 2001 Dodge Stratus

1 Answer

Sunroof and courtesy light not working in 2002 dodge status RT coupe.


when things stop working I check fuses first.
wires usually have connectors on them so removing then replacing the connector would be a better fix. on/off not new connector
A wire may have become disconnected while working in the area.
They are probably under the headliner.

Mar 04, 2013 | 2002 Dodge Stratus

1 Answer

2002 Dodge Stratus Rt 3.0L Need Firing Order


For the 2002 Dodge Stratus 3.0L SOHC V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
......(back).......
|...1....3....5...|
|...2....4....6...|
......(front)

Distributor Connections:
..(back)
.....1
3........2
5........6
.....4
.(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 04, 2010 | 2002 Dodge Stratus

1 Answer

I have a 2002 dodge stratus rt i just changed out the altanator for a new one and now the car turns over but will die as soon as you take your foot off the throtle


Disconnect the battery for about fifteen minutes. Your pcm needs to clear out so it can get fresh readings off the sensors. Sometimes the idle speed control sensor gets a little squirrelly when you play with the electrical systems on dodges. Good luck.

Apr 18, 2010 | 2002 Dodge Stratus

1 Answer

How do you change a headlight in a 2002 Dodge Stratus?


There are two bolts that need to be removed. You can identify them by the washer sitting underneath them. Remove the plug going into the lamp. Then, pull out (it will probably have to be forceful) the entire casing. You will see a large black ring. Remove this and then you should be able to pull out the light plug. Insert the new bulb and just put everything back together.

Apr 04, 2009 | 2002 Dodge Stratus

1 Answer

How to access plugs on 2002 stratus RT 3.0 V6


This web site has the steps to taking the manifold off http://home.pacbell.net/fong8/gstuff/tjc_plenum.htm

Mar 22, 2009 | 2002 Dodge Stratus

2 Answers

I need to know what battery I can buy for: 2002 Dodge Stratus RT Coupe


part # bb086525aa at any mopar dealer LIST PRICE IS 137$

Jan 13, 2009 | 2002 Dodge Stratus

Not finding what you are looking for?
2002 Dodge Stratus Logo

697 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...