- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like you need a blower motor resistor located down under dash on pass side next to blower motor. This is a comon problem and I have changed many of them. thats just the fan speed problem. Ive seen the blend doors break easily on those jeeps. thats inside the heaer core box and moves the flap from hot air to cold air. If it is stuck halfway -or mostly to cold- you may only get luke warm air. If they had the heater core out-maybe they possibly broke it.
There are separate blend doors for the passenger and driver's side. The blend doors divert, not block air, so it is unlikely that the blend doors are the problem. You need to check the operation of the re-circ door.
There may be some more duct work that attaches to the heat/air conditioning housing under the dash, that supplies air and or heat to both the driver side and passenger side of the car, the duct work on the driver side may have come disconnected.Check this also.
Hope this helps