Question about 1995 Chevrolet S-10 CA Edition

1 Answer

Replace Turn signal switch

I have a 1959 Chevrolet S10 pickup, I need to replace the turnsignal switch, it has tilt,cruise,wiper delay. How to replace???

Posted by on

  • 3 more comments 
  • budman1959 Oct 15, 2008

    I am sorry, it's a 1995 S10

  • budman1959 Oct 22, 2008

    Got it done but wasn't that easy!!! Had to revove steering wheek,deactivate air bag, diassemble lower dash unit!!! But was still cheaper that haveing a dealer do it!

  • jake_kinney Oct 29, 2008

    Hey I have a 95 S-10 and I'm in the middle of replacing the turn signal switch. I have it unplugged but I cant find all the screws that hold it to the steering column. I have one out but please tell me there is a way without pulling the steering wheel.

    Thanks in advance.


  • yadayada
    yadayada May 11, 2010

    It is simple compared to most repairs, ever wonder why so few folks what to work on cars for a living, this is your answer, I do these switches in less than 30 minutes.

  • yadayada
    yadayada May 11, 2010

    1959 S-10??

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 623 Answers

Fairly simple for average guy. Go or call a local parts store, and ask for a multifunction switch, your VIN number will help them to better ID the right one, cost maybe $80-100. They should be able to show you a diagram as to how it installs, usually just a couple of screws to remove plastic shouds to access the switch, which should have a plug going into it, plug and play.

Posted on Oct 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Chevy 1500 wiper spraying on low


Replace the pump at the container.

Mar 01, 2013 | 1993 Chevrolet C1500

1 Answer

Can you fix a windshield wiper switch and heater core at the same time in a 98 s10?


There not related,so doing the heater core doesn't doesn't make the wiper switch easier.Click here to see.Here's the heater core.

Feb 13, 2013 | 1998 Chevrolet S-10 Pickup

1 Answer

Replacing dimmer/wiper control switch,need to know how to unplug the wiring harness


I have a 98 s10 were can I find pictures of a dimmer switch and wires? Plz help ASAP

Jul 31, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

1988 no windsheild wipers or power to them have checked wiper motor is ok checked washer motor ok no power from switch on turnsignal for wipers delay washer or slow fast operation.


We need more info, like Make, Model, Year ect. What works, what does not, what you have checked, and the results of what you have checked.

May 11, 2010 | Cars & Trucks

1 Answer

Wipers only work on high, does not work on delay or one stroke. Started when wipers were frozen to windshield. 2007 chevy pickup


The wiper motor control module needs to be replaced, if you can buy one. The control module is mounted to the wiper motor. If you can't buy just the module, you will need to buy the entire unit. I am pretty sure you need the control module, but you can verify this by unplugging the plug that goes into the wiper motor and checking each of the pins on the plug with a 12 volt test light connected to ground while someone operates the switch. If the switch is good, you will get voltage on high as well as delay. I was able to locate an entire assembly on EBAY for less than the cost of the module from the dealer. Good luck!

Jan 03, 2010 | 2007 Chevrolet Avalanche LTZ

1 Answer

Need to relace the wiper/cruise control lever s10


take the cover off the wheel remove the center nut and you will have to get a steering wheel puller and crank that down on the center screw until the wheel comes off and then once you have the switch in just get the steering wheel in place and have it where you can catch a few threads and tighten it back down

Apr 12, 2009 | 1987 Chevrolet S-10 Pickup

1 Answer

Brake lights wont come on unless my bright headlights are on


By the discription just about the only thing it could be is the multifunction switch, this is the turnsignal, wiper, blinker, bright light, and cruise if it has it switch. And it is not verry simple to replace. The steering colum needs to be taken apart to replace.

Jan 01, 2009 | 1990 Chevrolet Corsica

Not finding what you are looking for?
1995 Chevrolet S-10 CA Edition Logo

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...