Question about 2003 Nissan Maxima
You need to program it. Here is how you doit.
Step by step:
1- get inside and lock all door with the "power dool lock switch"
2- insert the key into the ignition 6 times "IN and OUT" nice and steady until your hazards flash on dashboard. You can just keep inserting the key until you see the hazards flash, but 6 times should do it / get you into the program mode.
3-once the hazards flash, turn the key to ACC position (dash light up, but car is not running)
4-press any button on the remote (hazards should flash)
5-turn key OFF
7-unlock door with "power door lock switch"
8-open door DONE.
Posted on Oct 15, 2008
What about the fuse to the alarm itself?
is it good?
if it is ok,
you may need to re-program your key to the mother unit.
try this solution, it is used by most alarms that we install, who knows it might work on what you got there.
turn the key on and off for 5 times. on the fifth time, leave the key to the on position, now press the lock button, then turn off your key. and then test your remote.
i hope it works.
tnx 4 using fixya,
Posted on Oct 14, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 04, 2013 | 2005 Nissan Sentra 1.8
Jan 22, 2011 | 1996 Nissan Maxima
Apr 28, 2010 | 2007 Nissan Maxima 3.5 Sl Sedan
Jan 11, 2010 | 2007 Nissan Maxima 3.5 Sl Sedan
Sep 18, 2009 | 1996 Nissan 300ZX
Jul 15, 2009 | 2007 Nissan Maxima 3.5 Sl Sedan
Apr 03, 2009 | 2004 Nissan Maxima
Dec 30, 2008 | 1997 Nissan Maxima
May 16, 2008 | 1994 Nissan Maxima
577 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: