Dust filter How do I replace it?

Hi Maria: Remove the glove box, then you will be able to remove the cabin air/pollen filter. If you need help removing the glove box, try You Tube and search "2009 Honda CRV dust and pollen filter replacement. You can purchase one from a Honda dealer online or aftermarket such as Rock Auto, etc. Take Care.

The A service and B service is an oil change and a long list of inspections. Unless the service is covered under warranty, or this is a new car and you want some piece of mind, I suggest only getting the oil change. The rest of the "service" consists of someone looking for problems with your car. Here's what's included:

A SERVICE (~ $205.95 + tax) :

- Inspect and record tread depth, and correct tire pressure
- Rotate tires (excludes AMG, Sports Models, SLK, and vehicles with staggered wheels)
- Engine oil change and oil filter replacement
-Includes Mobil 1 synthetic oil
- Lubrication service
- Includes hood hinges, lock cylinders, striker
plates, sun roof tracks and top off all fluids
- Cooling system inspection
- Includes antifreeze protection level, hoses and
clamps
- Brake inspection
- Includes check of pad thickness and condition of
discs, fluids and lines
- Inspect heating and ventilation dust filter, replace if needed. (Replacement additional. Dust filter prices vary by model)
- Function check
- Includes warning lamps, headlights, exterior
lights, seat belts, windshield wiper and washer
- Inspect and lubricate throttle linkage
- Check and clean air filter
- Reset flexible service system counter


B SERVICE (~ $379.95 + tax) :

- Inspect windshield wiper inserts and service windshield washer system (Replacement of wiper inserts additional*).
- Inspect and rotate tires, record tread depth, and correct tire pressure. (Wheel balance additional*).
-excludes AMG, Sports Models, SLK, and vehicles
with staggered wheels
- Engine oil change and oil filter replacement
-Includes Mobil 1 synthetic oil
- Lubrication service
- Includes hood hinges, lock cylinders, striker
plates, sun roof tracks and top off all fluids
- Cooling system inspection
- Includes antifreeze protection level, hoses and
clamps
- Brake inspection
- Includes check of pad thickness and condition of
discs, fluids and lines
- Inspect heating and ventilation dust filter, replace if needed. (Replacement additional*. Dust filter prices vary by model)
- Function check
- Includes warning lamps, headlights, exterior
lights, seat belts, windshield wiper and washer
- Inspect and lubricate throttle linkage
- Check and clean air filter
- Reset flexible service system counter
- Inspect front axle ball joints; check steering play and power steering clutch; and rear differential levels
- Inspect Poly V-Belt for condition
- Inspect starting and charging system and service battery
- Inspect climate control refrigerant

2010 Audi A6 240 PS

Pollen filters replacement:
1. Remove the interior trim.


2. Remove the cover.



3. Remove the second dust & pollen filter, then the first dust & pollen filter.



4. Clean the dust & pollen filter housing.
5. Refit all parts in reverse order of removal.

Dust & pollen cabin air filter location:

The dodge Durango does not have a cabin air filter (pollen/dust filter) The only Dodge to have an dealer option to include one is the Dodge Caravan

Check the air filter and the sensors, they are clogged. You should also replace the oil and check the fuel filter, the lines and the injectors for damage, fine dust is a powerful abrasive.

Dust and pollen filter, removing and installing
The filter is located in the right rear of the instrument panel under a cover.

Components of dust and pollen filter:




1 - Frame 3 - Filter element 4 - Plastic nut, 2.5 Nm (20 in lb ) 5 - Filter housing with seal Removing

• Push center cover -1- forward -arrow A- and lift up to remove.

• Remove screws -arrows-.
• Lift right plenum panel cover -1- and remove from clips at front and rear edge.
• Pull cover -1- toward center of vehicle and out of retainer in A-pillar to remove.

• Remove screws -arrows- and remove right closeout panel -1-.

• Remove rubber grommet -1-.
• Press tabs of filter housing in direction of -arrow-.
• Remove filter element with frame in upward direction -arrow A-.

Installing

• Guide frame -1- into first slot on left and right sides of new filter element.
• Press frame with filter into housing -2- and engage retainers.

you can remove it and not replace it but it would allow dust and debris to flow thru into the cabin of the vehicle. if it is blocked then that means it has removed a lot of dust and you should just replace it or the inside of your vehicle may become very dusty.