Question about 2004 Nissan Quest

1 Answer

Change rotors How to replace brake pads and rotors?

Posted by on

  • Loringh
    Loringh May 11, 2010

    Replacing the brake pads (and rotors ?) is not too difficult but that depends on your level of mechanical
    ability. It would take quite awhile to go thru the different steps involved in your request.

    First of all, thr rotors do not necessarily have to be replaced unless they have been heavily damaged by pads that have been worn down to bare metals/rivets/ If the pads never got that bad they probably do not
    have to have anything done to them.

    Get bnack to me and give me some details on the status of the pads/rotors and on your general
    mechanical knowledge/ability

    Loringh


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Also if your car shakes when you stop your roters are warped.

You may need to take it into a brake shop as the procedure is to long and complicated to type out and it varies from car to car...

Posted on Oct 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What tools do i need to change brake pads on 2005 yukon xl


Jack, wheel wrench, socket set, large screw driver, pair of pliers or grips. Lithium grease for the pins. Watch all of these videos. .spell{font-size:18px}.spell_orig{font-size:15px}#mss p{margin:0;padding-top:5px}




g-img{display:block}._WCg{display:block;border:0;position:relative} Search Results

    How To Install Replace Front Brake Pads 2000-06 Chevy ...

    9k=? 4:46 https://www.youtube.com/watch?v=nPohZtD8zlA May 27, 2014 - Uploaded by 1A Auto Parts http://www.1aauto.com/brake-pads/i/1abps00080 1A Auto shows you how to ... Front Brake Pads 2000-06 ...

    HOW TO INSTALL REPLACE GMC YUKON DENALI ...

    z? 14:10 https://www.youtube.com/watch?v=um7dt_yvZ1s Sep 20, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon Denali. Changing these parts ...

    How to REPLACE INSTALL BRAKES and ROTORS GMC ...

    2q==? 11:32 https://www.youtube.com/watch?v=UWqows3P4DE Feb 11, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon. Changing these parts ... Would ...

    GMC Denali Brake Pads Removal and Installation - YouTube

    z? 3:45 https://www.youtube.com/watch?v=uEKs8nphVxU Oct 24, 2012 - Uploaded by AnotherLookFilms Remove and Install rear brake pads on your 2006 GMC Denali XL. ... 9-21-13 2007 GMC Yukon rear brakes ...

    GMC Yukon Denali Front Disc Brake Pad Replacement ...

    2q==? 8:21 https://www.youtube.com/watch?v=w_gn_l5lYkw Jun 20, 2013 - Uploaded by AMS Automotive Watch the proper procedure for replacing front disc brake pads. Featured vehicle: 2007 GMC Yukon Denali ...





Jan 22, 2016 | Cars & Trucks

2 Answers

Put new pads on front2004Suzuki Verona and they still grab when putting on brake


How to change Rotors and Pads suzuki Verona - YouTube

? 17:43
https://www.youtube.com/watch?v=xCSDNJQIF7g
Jul 23, 2014 - Uploaded by Gurjinder Singh Kang
How to change Rotors and Pads suzuki Verona. Gurjinder Singh Kang .... HOW TO INSTALL FRONT BRAKE ROTORS AND BRAKE PADS!

Nov 07, 2015 | Cars & Trucks

4 Answers

Brake trouble Grinding sound


sounds like it is time to replace the brake pads. i would do it quickly before you ruin the rotors.

Apr 06, 2011 | 2005 Mitsubishi Lancer

2 Answers

Front end shakes when braking


will try to help. when front wheels shake while applying brakes and you can feel shake in steering wheel, front brakes and rotors need replacement.rotors are warped,if you replace front brake pads, it will return[shaking when you apply brakes] suggest that you replace front rotors[both] replace [both]front brake pads. cost? i would charge [brake pads cost $55.00] labor,$60.00] total $115.00 thank you for choosing fixya.com

Dec 04, 2010 | 1998 Ford Windstar

2 Answers

My 1998 ford escort brake peddle started pulsing and then a noise. Checked fluid, not down any fluid, and no leeks, just feels like I can not stop well., No ABS lite til yesterday, then it came on after...


Normally a "pulsing" brake pedal means that that you have a warped brake rotor or the brake caliper is lose. I would start by taking the front wheel off and inspecting the brake pads and the rotor. If the brake pads are worn down bad replace them. Pay special attention to the brake rotors also as if the are grooved very bad, they should also be replaced.

Nov 15, 2010 | 1998 Ford Escort

2 Answers

Is it best to replace the rear brake assembly -pads,rotors,calipers all at the sane time ?


Normally, unless the caliper is not functioning or leaking brake fluid you don't have to replace it.
Replace the rotors and pads only.

Jun 24, 2010 | 2002 Ford Mustang

2 Answers

Does the 2003 gmc yukon have rear rotors? and do the brakes need to be changed if the rotors need to be machined?


Yes, it has rear Disc Brakes, I would suggest to change the rear pads since they have to remove the rear Brake Calipers to remove the rotors and it wouldn't take much more time or labor to replace the pads at that point. That way when your rear rotors are re-installed and your new brake pads are installed your rear brakes should give you longer service life and better stopping power.

Jun 04, 2010 | 2003 GMC Yukon

3 Answers

Rear brake pads wear out every 30000 miles on 2002 3/4 tod hd , rotors are pitted bad


That's to be expected and is completely normal.

Rear brake shoes as fitted to drum brakes can typically last up to 60k miles with periodic adjustments, but you have rear disc brakes and the shoes will typically last half of that.

Also, modern brake pads no longer contain asbestos and are now made using harder metallic compounds; the direct result is that brake discs (US=rotors) are also considered to be consumable items as they are worn down by the harder pads. It's not unusual to have to replace front discs every other pad change and rear ones with every pad change; in both cases the mileage will typically be around 30k miles on most models.

Nov 15, 2009 | 2002 GMC Sierra 2500HD

1 Answer

Do i need to change the brake pads and discs???


No you don't, you can have them turn the brake disk/rotor . Turning the brake disk/rotor is when you have the surface of the disk resurfaced by having a brake lath cut the high spots down. The disk are cheap enough now that most will just replace the disk/rotor the same time they replace the brake pads. You can pick up performance drilled or slotted brake disk/rotor for almost the same price as the OEM disk/rotor. Good luck and hope this helps, you can pick up the slotted brake disk/rotor at Auto Zone for a reasonable price and they will have the step by step instruction replacing the disk and if you like to just have the disk/rotor turned, they can do they there too.

Jun 07, 2009 | 2002 Volvo S40

3 Answers

325 ci brake rotors have been replaced 4 times in 6 years


BMW rotors are not known for lasting very much more than 30-45k miles. When the brakes are inspected, they measure the pads using a special tool threw the outer brake pad. Min spec is 3mm. When the pads are replaced, they measure the thickness of the rotors. The rotor spec is stamped on the rotor. if they are under that spec, they recommend replacing them as well. Next time you bring it in for service, just ask them to measure the rotor thinkness, (its not a huge task, all they have to do is take the wheels off). But more often than not, the rotors wear just as fast as the pads.

Feb 19, 2009 | 2003 BMW 325

Not finding what you are looking for?
2004 Nissan Quest Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...