Have you had your intake manifold cleaned out before? They can really get gunk-ed up. It only requires some Throttle Body Cleaner to be sprayed inside the intake. Be sure that the engine is NOT running when you do that.
Also spark plugs do not come pre-gapped. You need to adjust them to the correct gap.
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try cleaning the throttle body around the butterfly. Gas carbon will build up in the throttle body and that will cause one to stall or not run good. I just use starting fluid and screw driver and rag, does a good job. Hope this fixes it, Mitchell.
Was there any water in the tank? Has anyone changed the fuel filter? Has anyone checked the ceramic ballast resistor on the drivers fender near the master cylinder? Has anyone checked the crank sensor output? Did anyone see if it will run if you spray carb cleaner into the throttle body after starting? Are there pulses present at injector? You need to verify these things to get some idea what is going on there.
I have a 1997 626 2.0L 5speed when im driven it like rev limits cuts out around 3500-4000rpm, and when i rev it up and past 4000rpm it stalls, anyone have a idea whats wrong??? thanks i just replaced the crank sensor and egr and still. good power put cuts out
change plugs wires also .fill gas tank up put prestone or gum out fuel injector cleaner.drive car around several miles.give injector cleaner time to clean out injectors.wait until engine cool .change fuel filter.relief fuel pressure before changing fuel filter.
Wow!!! Now that's a headfull of problems....
This could be a great many things...
Check these before you sell. I have a '93 Aerostar and can't live without it.
1. Check idle speed
2. Fuel filter may be clogged or water in the fuel system.
3. Choke improperly adjusted or sticking.
4. Distributor components damp or damaged.
5. Faulty emissions components.
6. Faulty or incorrectly gapped spark plugs/ Also check wires.
7. Vacuum leak at the carburetor/fuel injection unit or vacuum hoses.
8. On 1986 models, stalling during idle or deceleration may be caused by sludge in the throttlebody. (2.3 litre engine)
9. On 1986 & 1987 models with a 2.3 litre engine,hesitation or stalling during acceleration may be caused by carbon build-up on the intake valves.....I hope this helps!! Adios