Question about 2005 Mini Cooper

1 Answer

Engine wants to stall at red light

I have brought the car to the dealer and they cant find anything. At red lights it wants to stall but if I ease my foot off the gas pedal, it seems ok. The car has nearly 115,000 miles on it. any ideas? thanks

Posted by on

  • Anonymous Feb 14, 2009

    93 s10 stalls at red lights starts with eiather

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mini Master
  • 77,544 Answers

Have you cleaned the throttle valve and the idle speed control valve, how about the cleaning the fuel injectors? not a can of cleaner but a professional cleaning at the dealer? These three items can all cause your problem and as a pro tech it is where I would start. One more question have you checked the OBD 2 system for trouble codes?

Posted on Oct 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a diagnostic test on my car cause my check engine light is on and it is shaking real bad when driving it and when i stop at a red light it seems like it wants to stall out


P0305 is a # 5 cylinder misfire , do you know what that is ? Check engine light flashing indicates a severe misfire that can damage the catalytic converter . Don't drive this vehicle ,take it immediately to a qualified repair shop or the dealer .
A Ford P0171 is a LEAN code for cylinder bank 1, and P0174 is a LEAN code for cylinder bank 2. These codes commonly occur on many Ford vehicles, and are set when the powertrain control module (PCM) sees the air/fuel mixture is running too lean (too much air, not enough fuel).

Flashing check engine light CarMD

Oct 24, 2017 | 1998 Ford Mustang

1 Answer

I have a 2000 4 cyl. automatic Camry with 52,000. Recently, the car has developed a rough idle and it stalls. This occurs when the engine is hot and I slow the car down at a stop light or it stall as I am...


try disconnecting the hose to the brake booster and plugging it, the take it for a drive, ( you won't have power brakes so do this in a empty area)

Jul 19, 2010 | 1997 Toyota Camry

1 Answer

Car stalls repeatedly after fueling


have the fuel pressure regulater checked that it is maintaining correct pressure and not bleeding off when shut down

Feb 20, 2010 | 2005 Dodge Magnum

1 Answer

MY 2005 Jeep grand \cherokee limited has been


the reason the oil light and power steering are on and gone is that the engine stalled out,which means no oil pressure,and without the engine running you have no power steering.when you say dealer do mean a jeep dealer?
if no current codes were in the computer, did they go into the history of codes to see if anything was there?
if it is a soft code which is one that will reset it's self when you cycle the key off to on,they won't find a current code if you pull over and turn the key off.May be you could let one of the mechanics drive it home 1 night and return it in the morning,that way he can drive it with the scan tool hooked up,you will have to be aware of what speeds you were doing,was you at a red light,going up hill,using the brake,you need him to know exactly what you were doing so he can drive the same way to duplicate the problem.
also have them check any TBS's for this problem,
Technical Service Bulletins, from Chrysler and Jeep .

Nov 19, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Engine light on dash board


Get your money back from them, they screwed you.

Apr 28, 2009 | 2000 Volvo V40

2 Answers

Car wont start


IS THE RED LIGHT THAT IS STAYING ON THE BATTERY LIGHT? IF SO IT COULD BE AN ELECTRICAL FAULT, AND IS NOT FIRING UP THE ELECTRIC FUEL PUMP

Mar 13, 2009 | Acura CL Cars & Trucks

1 Answer

Car shuts off while driving


***

Don't know if this has anything to do with your problem, but it could be worth a try.
My 2001 turbo had a similar problem when it was low on oil.
The oil light never came on, but it was low enough to cause it to stall.
Seems there has to be enough oil circulating on the camshaft (I think they told me the camshaft, now it has been so long that I am not positive).
Either way, a quart and a half of oil solved my stalling problem.
And the problem got bad enough before I had it towed to the VW shop that it wouldn't start, very much like it had a dead battery or an electrical (starter/ignition) problem, but i still had plenty of power for horn, lights, radio, etc.

Hope this helps!

Peace,

Rob

***
***

Oct 09, 2008 | 2002 Volkswagen Beetle Turbo S

Not finding what you are looking for?
2005 Mini Cooper Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mini Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

yadayada
yadayada

Level 3 Expert

77544 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...