Question about 1991 Mazda 626

1 Answer

HOLD SYSTEM LIGHT FLASHING

Wont shift at all now 91 mazda 626 should i put a bullet in her?

Posted by on

  • Anonymous Mar 27, 2014

    Reconditioned transmission put all back together and hold light is flashing after a while

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There a fuse in the fuse box change it and it will shift i think it is a number 15 fuse

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mazda 1.8 626, upon starting and shifting it into gear it cuts off and on hill it loses power.


Tune up, filters. Being a 91, I would do a compression test on the cylinders first. Bad compression? None of the stuff above will help much.. Sometimes makes it worse.

Sep 11, 2016 | 1991 Mazda 626

1 Answer

97 mazda 626 wont shift from park. release button on side of shifter wont push in. removed knob, plastic rod in center wont move


The 1st thing you need to do is check the brake lights, if they are not wiorking the park lock solenoid doesn't get power and the park lock remains engaged.

Apr 17, 2012 | 1997 Mazda 626

1 Answer

94 mazda 626. whats the purpose of the "HOLD" button. And how do i shut off the "HOLD" light?


if you mean the gearbox?? then their should be a button near the gearchange or on the T shift ,try that

Aug 12, 2010 | 1994 Mazda 626

1 Answer

I have a 91 mazda 626. directionals and4 ways dont work properly


check all of your wires with wire tester. maybe they are being shorted out somewhere. Check your fuses to make sure none are blown/bad. Check the light bulbs to make sure they aren;t blown.

Mar 11, 2010 | 1995 Mazda 626

1 Answer

2000 mazda 626 o/d off light blinking/flashing.


the light is flashing to alert u to the fact that a fault has occured in the transmission, the common cause is slipping, you may not even feel this, but to confirm where the problem is the system must be tested for fault codes.

May 09, 2009 | 2000 Mazda 626

1 Answer

91 mazda 626 erractic idle surge when engine is cold


My '91 626 did the same thing. I tested the throttle position sensor, and it was good so that wasn't it. The other likely culprit is the Idle Speed Control valve, or Idle Air Control valve, which is a $500 part new (more than I paid for the whole car). I pulled one off a 626 at the salvage yard and got it for 3 bucks, put it on (it's an easy DIY, just 4 philips screws holding it to the intake manifold), however I can't be sure that solved the problem, since I haven't run the car much since then. It would seem the most likely cause, tho, and a cheap fix if you go used. Other possibilities: O2 sensor or Mass Air Flow sensor?

Feb 16, 2009 | 1991 Mazda 626

1 Answer

Od light flashing


yes that is your OVER DRIVE light do you have it in OVER DRIVE or regular "D" for drive is it shifting okay?????maybe see garage who replaced your transmission maybe something not plugged in proper! hope this helped you.John

Jan 11, 2009 | 2001 Mazda Protege

2 Answers

Mazda 626 'HOLD' light after gear box oil seal was replaced


I have the same problem with my car I think its the torque converter clutch but you should visit a diagonestic machine just to find out

Dec 06, 2008 | 1998 Mazda 626

1 Answer

Battery light flashing


ill help you cause i have a 94 mazda 626 and i work on it all the time and your problem is that there is short in your wiring system

Nov 17, 2008 | 2002 Mazda 626

1 Answer

Mazda 626


had the same problem in my car. the transmission may over heated and its blown the overdrive. it could also be the trans cooler playing up or finally the cam belt may have skipped a few notches. DONT run the engine get a repair man to come to you. if its the cam belt running the engine can damage the cylinder heads and then it becomes real expensive, they're all relitivly easy to fix.

Jul 18, 2008 | 1992 Mazda 626

Not finding what you are looking for?
1991 Mazda 626 Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...