Question about 2004 Dodge Ram 1500

Open Question

C-codes # 63 / # 57

Well i pushed in the reset knob dash and held it there then turned key to on postion & let it check everything & it came up with c-codes

41-63
41-57

Posted by on

  • yadayada
    yadayada May 11, 2010

    What reset?? what kind of codes are these, C??

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: will not start

hope your not have the same problem that i had. i had to replace the ecu. my gauges wouldnt read and my odometer just flash and that would be it and the gas light would come on even though it had a full tank. but there one thing that you could try. replace the auto shut down relay first before you go and replace the ecu. the auto shut down shuts the computer off when you turn the key off. and if thats not working right then the computer wouldnt come on and the truck will not start and the fuel pump will not come on and the spark plugs will not fire.

Posted on Jul 03, 2008

Ad
  • 518 Answers

SOURCE: 02 dodge ramm 1500 with 4.7, started sputtering

Code 41 alternator field not switching correctly. Code 31 can be a variety of things relating to a fuel or evap leak. You are better off getting it scanned to get the P #s. That will narrow it down to a specific area. Autozone or advance auto parts will usually scan for free. Get codes then let us know what they are.

Posted on Jun 15, 2010

Testimonial: "thank you so much"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 acura tl battery light does not come on when ignition key turned to on postion battery not chargeing


its probly ur alternator. u can check it by starting your car then taking off positive cable when its running. if it stalls its the alternator not charging

Oct 09, 2012 | 2000 Acura TL

1 Answer

How do i reset the service counter in my 2002 mercedes ml500


Turn the ignition key 2 clicks (postion II) and then quickly push trip button twice, you should see time or mileage remaining for service.hold trip button down and turn key off, keep trip button down do not release, with trip still down turn key back on to the II postion continue to hold button for about 10 sec,you will hear the dash beep and the display will read 10000,all set release trip and turn key off. let me know the outcome. good day

Feb 15, 2012 | Cars & Trucks

1 Answer

How to reset "maintenance required" warning light


To reset the maint light turn the key to postion 1 then push the trip button in and hold then turn key to postion 2 while still holding the button continue to hold the button light will flash and go out turn key off then start engine to see if it reset, note make sure the display is showing the mileage not the trip. good luck.

Jan 25, 2011 | 2007 Lexus GX

1 Answer

How do I reset oil change light


For a 2005 trailblazer to reset the oil change light you will need to make sure all doors are closed then turn key on and slowly push gas pedal to floor three times within five seconds, this must be done within 5 sec, from the time you turn key on, the key must be on so all dash light are on its right before the engine start postion, after you push gas pedal to floor three times the light will flash a few times then go out. the system is now reset, if it doesnt reset then repeat steps starting with turning the ignition on, take note engine must be off, not running, have a nice day and i hope this is helpful.

Nov 28, 2010 | 2005 Chevrolet Trailblazer Ext

1 Answer

How do you reset the "time for service" button on a 2004 volve V70 AWD


Turn your key to position I Hold in the Trip odometer reset button
While holding the reset button in, turn key to postion II.
Keep holding the reset button in until the warning triangle on the dash flashes, then release.
Thanks,
Lee

Oct 27, 2010 | 2004 Volvo S60

1 Answer

How can i reset tire monitor


turn key to on position where the dash lights etc. are on without turning the engine on. then pull the headlight knob out to where the parking light position is and push back in. do this three times. you will hear a chime beep letting you know the message center has ben reset. turn ignition back to off position then start car message should be gone.

Nov 27, 2009 | Chevrolet Impala Cars & Trucks

2 Answers

Maintenance Lamp


Here's how you reset your maintenance light.

To reset the light,
Turn the ignition on
Make sure the odometer displays "ODO"
1.Turn the key off
2.Press and hold down the same button you use to get to "ODO"
3.Turn the key back to ON ( while still holding down the button)
4.Hold the button in until all the flashing lines on the odometer go away and the bunch of "000000" shows up and the maint reset light will turn off.
Your'e done.

If this doesn't work, you would have to try it on "trip A" instead of "ODO".

Oct 03, 2009 | 2006 Toyota Tundra

2 Answers

Low tire pressure light is on all tire pressure is were it should be any reset procedure???2004 chevy impala ss


Turn off the radio and turn the key to the on postion. push the bottom knob ( to turn the station). Hold it in intell the info comes on. in the window it will show all the things you can reset. using the arrows to the right of the knob find tire reset the push on the station knob. this will reset it. then go back to the arrows and find end. push on the knob one more time and you will be done.( you have to make sure the radio is off). I hope this helps.

Feb 27, 2009 | 2004 Chevrolet Impala

2 Answers

Change oil indicator light remains on


There are codes to reset it after the oil has been changed. My car is an 2001 and i have to pump the gas pedal 4 times to reset it when the car is off. Look in the manual it should say in there.

Feb 16, 2009 | 2004 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...