How does a person with soya allegies drive or go into the vechile when your seat are made from soya so that means we have to buy another make of vechicle because if i buy a new ford , or go into a new ford the seats with make me sick
thks have a great day
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I dont the vechile or type, but there is a small button on the plastic piece on the posts that hold the headrest. Push on it an lift headrest. Other vechile you have to pull up on the side lever to raise the headrest. Different on different vechiles
never go to station,with a check engine light on,always have your vechicle scaned at a shop,first to make sure,your OBD 2 SYSTEM,sysems are ready,example,o2 sensors,catylst system,ect.you may even have a blown fuse,that will prevent the vechile from comunicating with the emmions machine!!!!,FORDS AND GM PEOPLE,MAKE SURE WHEN YOU DRIVE THE VECHILE,AFTER THE TEST WITH A FULL TANK OF GAS.
CANT DISABLE SAFETY FEATURE. SEAT BELT CIRCUIT PART OF THE AIRBAGS SYSTEM. SEAT BELT HELP TRIGGER SIDE AIRBAGS AND AIRBAGS IN STEERING WHEEL.ON VECHICLE CRASH IMPACT.NEED TO LET DEALERSHIP REPLACE WORK ON FRONT SEAT.IF YOU WORK ON VECHICLE MOVE AROUND THE SEAT BELT RETRACTER COULD SET OFF THE AIRBAGS.AIRBAGS DANGEROUS LET QUALIFIED TECHNICIANS DO THE FIX.
It is telling you that either your seat belt is not on or your passengers is not on. There is a sensor inside the seat belt buckle that tells the car you are wearing it. If the passenger seat senses the weight of a person (or big dog) and they don't have the buckle on then the light will come on. If the seat belts are both buckled in then you must have a bad sensor on the buckle.
TO LIFT UP REAR SEAT.INSERT A SCREW DRIVER BETWEEN THE REAR SHELF AND THE SEAT BACK AND DETACH THE TWO CLIPS THEN LIFT THE SEAT BACK OUT OF THE VECHICLE. REMOVE SEAT CUSHION BY PUSHING IN ON THE TWO CLIPS AT THE BASE AND THEN LIFTING THE SEAT CUSHION UP AND OUT OF THE VECHICLE.
LIFT THE REAR SEAT BOTTOM CUSHION UP SHARPLY AT THE TWO FRONT CORNERS UNTIL THE TWO CLIPS COME OUT OF THE BODY,THEN SLIDE THE SEAT CUSHION FORWARD AND OUT OT THE VECHICLE. AT EACH LOWER CORNER REMOVE THE NUTS SECURING THE TWO REAR SEAT BACK TABS WITH THE NUTS REMOVED PULL THE SEAT BACK FORWARD ENOUGH FOR THE TABS TO CLEAR THE STUDS THEN PULL THE SEAT BACK SHARPLY UP AND TOWARD THE INSTRUMENT PANEL TO DISENGAGE THE UPPER SEAT CLIPS FROM THE BODY.REMOVE THE SEAT BACK FROM THE VECHICLE.
Does this happen when you put an item of some sort on the passengers side seat, that warning sign is for not having a seat belt on as the seats have sensors (this is on right hand drive vehicles, eg. Australia)
LIFT THE REAR SEAT BOTTOM CUSHION UP SHARPLY AT THE TWO FRONT CORNERS UNTIL THE TWO THE TWO CLIPS COMES OUT OF THE BODY,THEN SLIDE THE SEAT CUSHION FORWARD AND OUT OF THE VECHICLE.AT EACH LOWER CORNER REMOVE THE NUTS SECURING THE TWO REAR SEAT BACK TABS.WITH THE NUTS REMOVED PULL SEAT BACK FORWARD ENOUGH FOR THE TABS TO CLEAR THE STUDS.THEN PULL THE SEAT BACK SHARPLY UP AND TOWARD THE INSTRUMENT PANEL TO DISENGAGE THE UPPER SEAT CLIPS FROM THE BODY.REMOVE THE SEAT BACK FROM THE VECHICLE.INSTALLATION IS THE REVERSE OF REMOVAL.
RAISE AND SAFELY SUPPORT VECHICLE.PLACE A SUPPORT UNDER THE REAR AXLE.REMOVE NUTS AND BOLTS ATTACHING THE SHOCK ABSORBER TO THE RADIUS ARM.REMOVE THE NUT SECURING THE SPRING TO THE AXLE AND REMOVE THE RETAINER.SLOWLY LOWER THE AXLE TO RELIEVE THE SPRING TENSION.REMOVE THE SPRING BY ROTATING THE UPPER COIL OUT OF THE TABS IN THE UPPER SPRING SEAT - TO INSTALL.INSTALL. THE TOP OF THE SPRING IN THE UPPER SEAT.ROTATING INTO POSITION.RAISE THE AXLE UNTIL SPRING IS SEATED IN THE LOWER SPRING SEAT.INSTALL THE LOWER RETAINER AND TIGHTEN THE NUT TO 70 - 100 FT LBS .THEN CONNECT THE SHOCK ABSORBER TO THE RADIUS ARM AND LOWER THE VECHICLE.