Question about 2004 Mazda 3

2 Answers

CHECK ENGINE LIGHT

MY CHECK ENGINE LIGHT STAYS ON AND GOES OFF ON MY MAZDA 3 AND I NOTICE ON HERE THAT YOU ALL HAVE AS THE SOLUTION THE HORN BUT MY HORN STILL WORKS SO COULD IT STILL BE THE HORN CAUSES THE LIGHT TO COME ON SOMTIMES AND STAY ON. ALSO DO THESE CARS HAVE A PLACE WHERE YOU CAN PLUG UP A MCAHINE AT AND IT WILL GIVE A CODE BECAUSE I CAN'T FIND THE PLUG IN TO PLUG THE MACHINE TO.

Posted by on

  • Anonymous Nov 06, 2008

    the engine lights remains on, but oils and water levels OK. I use a garden hose to wash some buff residue gathered on the stone shield (front right). I only has the six day, its pre-own, so could you tell me were to look for the horn.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I recently purchase a pre-own M3 sport. The radiator fan is working but i observe this deep "truck truck" sound before the fan engages, to me this operation use to be much quieter. Is this normal.

5-10mins after switching off there is a sound as tough air is being release under and around the belt side of the engine, is this normal

Posted on Nov 06, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

A code reader can be plugged into the OBDII port located under the drivers dash, most parts stores will read your codes for free and then you can tell exactly what is the problem that is triggering the CEL

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have electrical issues on a 2004 mazda 3.


I would check every single fuse in the car. Blown fuses can cause weird issues like this. While the initial issue with the mechanic does sound like an alarm problem....the rest does not unless the shop that installed it really butchered the job.

Jul 18, 2016 | 2004 Mazda 3

1 Answer

Mazda mpv 2001 alarm stay on and it does not start the engine


if you do not have a remote to press unlock on put the key into the drivers door, turn to lock and then unlock, the horn should stop and the engine should start.

Oct 14, 2012 | Mazda MPV Cars & Trucks

3 Answers

My horn on my 1992 mazda B2600 does not work


If you have a test light, unplug the single wire that's plugged into the horn. Connect your test light clip to a good ground such as the engine block or even the battery. Then insert the point of the test light into the terminal of the wire that you unhooked from the horn.Have someone push the horn button and if the test light lights, you do have power to the horn. If it doesn't light, you might check the horn relay. Sorry, I can't tell you where it is in your Mazda though. If the test light did light up when the horn button was pushed, then I would suspect that it isn't grounded properly, or, the horn is defective. Try unbolting the horn and sanding off the rust that formed between the horn and where it mounts. Typically, horns are mounted to the vehicle's frame.

Jul 12, 2011 | 1992 Mazda B-Series

2 Answers

I put a running engine into a 1999 mazda 626 but now the motor has no power to the starter. I put the key in and it chimes the door locks work the lights and break lights work the horn works the trunk lock...


check weather the car security system is engage or not if it is engage then the car wont start up because some times if such system is active then the car security system cut off the power supply to the starter & the engine is without power supply so better check it or the best way is to better consult a authorized Mazda service station for trouble free drive

Jun 29, 2010 | 1999 Mazda 626

1 Answer

Brake lights and horn are not working..2005 mazda 3. Need schematic of wire system


I have a mazda b 2200 truck and the fuse for the horn and the brake lights share the same fuse.check the fuse for it under your dash.

Oct 08, 2009 | 2005 Mazda 3

3 Answers

Shaking mazda mpv 2003 in idle and loud radiator fan


Hello there, As far as the check engine light I would think since you mentioned it shacking that your light will probably be on for a misfire, Meaning most likely you have a spark plug wire going bad. I would stop by somewhere such as Autozone for a free check to tell you why your light is on just to double check.

Your fan issue could be several different things such as the fan motor going bad or the blades could be rubbing something, that one is a little tricky without hearing it.

Good Luck and I hope this does help you some. Allen

Oct 04, 2009 | 2003 Mazda MPV

1 Answer

The horn on my 2004 mazda b-4000 goes of by itself when the lights are on. I shut the lights off and when I hit the horn the dash lights go on at the same time.


something wrong with your electrical connection. turn light switch on and off for so many times. also the horn switch on and off. if not corrected, check the wiring inside the steering wheel.

Oct 01, 2009 | 2004 Mazda Truck

2 Answers

My brake lights wont work,i checked all the fuses,bought new bulbs,and bought a brake switch,and still nothing.my regular lights come on,just my brake lights dont work.dont no if this is part of the...


Just had a similar problem. Brake (stop) lights and horn didn't work. Couldn't find mention of stop lights in fuse chart. Found horn fuse to be slot 21 in the engine fuse block (not the fuse block in car interior). Replaced 15A fuse and all now ok.

Aug 21, 2009 | 2005 Mazda 3

1 Answer

Mazda tribute 2002 stalling


1. will it stay running if you foot is sligtly on the gas.
if so common problem it the IAC valve located on top of the throttle body. it controls ait into the engine when throttle is closed.
2. do you hear loud fog horn like sound or hissing. this could indicate a vaccum leak.
3. are there any performance problems while driving.

my best guess would be the IAC (idle air control) valve

Jun 23, 2009 | 2002 Mazda Tribute

Not finding what you are looking for?
2004 Mazda 3 Logo

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...